Warm Audio RingerBringer Analog Ring Modulation Pedal
AED 814.000 Excl. VAT
- Analog Ring Mod Pedal with LFO, Modulation
- Faithfully re-creates a quintessential ring mod pedal
- Perfect for pedalboards — also compatible with synth, bass, keyboards, etc.
- Amount, Rate, Mix, and Frequency parameters
- LFO waveform selector and frequency toggles
- Drive control introduces saturation, grit, or distortion
- All-analog design complete with premium op-amps
In stock
RingerBringer
100% Analog Ring Modulation Pedal With LFO, MOD, FREQUENCY & RATE Controls
Accurate Recreation Of The Ultimate Ring Modulator For Experimental Tones
Reviving an Avant-Garde Pedal for Music’s Trailblazers
From light Lo-Fi modulation all the way to the piercing sound of infinity ring-modulation, the Warm Audio RingerBringer accurately recreates the ultimate all-analog ring modulation effect used for experimental tones. Like the original, loved by artists like Jeff Beck, Radiohead, Omar Rodríguez-López, Trent Reznor, and many more, RingerBringer delivers the original distinct set of controls, extensive in/out options, and rich sonic textures to inspire boundless sonic experimentation.
Don’t Just Play, Create
The ideal platform for the sonic tinkerer, RingerBringer inspires you to generate layered frequencies and harmonics, explore a wide range of sonic possibilities for guitar, bass, synthesizers & beyond, and design your own sounds from the ground up. Extensive controls including LFO, MOD, FREQ (FREQUENCY) & RATE open up sonic possibilities that range from subtle overdriven textures all the way to wobbling, warped leads soaked in texture and tone. RingerBringer is 100% analog and sports premium components including hand-selected op-amps and transistors. RingerBringer is no emulation or “patch”, instead it delivers true-to-spec performance of the boutique, analog original.
Alien Octaver
Harmonic Dissonance
Swamp Trem
Weight | 1.07 kg |
---|---|
Dimensions | 20.57 × 17.53 × 10.41 cm |
Pedal Type: |
Ring Modulator |
Analog/Digital: |
Analog |
Inputs: |
1 x 1/4" (audio in), 1 x 1/4" (carrier in) |
Outputs: |
1 x 1/4" (audio out), 1 x 1/4" (carrier out), 1 x 1/4" (LFO out) |
Other I/O: |
4 x 1/4" (CV in: Rate, Amount, Mix, Freq) |
Bypass Switching: |
Buffered Bypass |
Power Source: |
9V DC power supply (sold separately) |
Power Usage: |
100mA |
Batteries: |
1 x 9V |
Related products
Warm Audio WA-47Jr Large-diaphragm Condenser Microphone – Nickel
- Large-Diaphragm FET Transformerless Condenser Microphone
- Polar Patterns: Cardioid, Figure-8, & Omnidirectional
- Toshiba FETs, Wima film capacitors, Panasonic electrolytic capacitors
- 10 dB Pad | 70 Hz High-Pass Filter
- Custom ’47-style k47 34mm gold-sputtered, dual-diaphragm, single–back plate
- Dynamic range: 138dBA
- Includes shockmount, hardmount, and zipper storage pouch
Warm Audio WA-84 Small-diaphragm Condenser Microphone Black – Single
Warm Audio WA-84 Small-diaphragm Condenser Microphone Nickle – Pair
Warm Audio WA-84 Small-diaphragm Condenser Microphone Nickle – Single
Warm Audio WA-84 Stereo Microphone Pair with Omni & Cardioid Capsules – Nickle
Warm Audio WA-87 R2 TS Large-diaphragm Condenser Microphone Stereo Pair – Limited-edition Titanium
Warm Audio WA-CX12 Large-Diaphragm 9-Pattern Tube Condenser Microphone
- Large-diaphragm Tube Condenser Microphone with 9 Polar Patterns
- Premium Tube, and 7-pin GAC-7 Cable
- Custom edge-terminated, dual-backplate, all-brass vintage CK12-style capsule
- Custom TAB-Funkenwerk (AMI) USA output transformer
- Premium 12AY7 vacuum tube
- Frequency response range of 30Hz–20kHz
- Max SPL of 149dB
Warm Audio Warm Lifter Inline Active Microphone Preamp
- Inline active microphone preamp with 26dB Of true analog gain
- Ultra-low noise JFET input, balanced I/O signals
- Operates on +48V phantom power
- Selectable highpass filter (100Hz) and selectable high-shelf boost (3kHz)
- Input impedance at 2.4k Ohm
- Rugged, top-quality construction
- Built and inspected in Austin, Texas