Warm Audio RingerBringer Analog Ring Modulation Pedal
AED 814.000 Excl. VAT
- Analog Ring Mod Pedal with LFO, Modulation
- Faithfully re-creates a quintessential ring mod pedal
- Perfect for pedalboards — also compatible with synth, bass, keyboards, etc.
- Amount, Rate, Mix, and Frequency parameters
- LFO waveform selector and frequency toggles
- Drive control introduces saturation, grit, or distortion
- All-analog design complete with premium op-amps
In stock
RingerBringer
100% Analog Ring Modulation Pedal With LFO, MOD, FREQUENCY & RATE Controls
Accurate Recreation Of The Ultimate Ring Modulator For Experimental Tones
Reviving an Avant-Garde Pedal for Music’s Trailblazers
From light Lo-Fi modulation all the way to the piercing sound of infinity ring-modulation, the Warm Audio RingerBringer accurately recreates the ultimate all-analog ring modulation effect used for experimental tones. Like the original, loved by artists like Jeff Beck, Radiohead, Omar Rodríguez-López, Trent Reznor, and many more, RingerBringer delivers the original distinct set of controls, extensive in/out options, and rich sonic textures to inspire boundless sonic experimentation.
Don’t Just Play, Create
The ideal platform for the sonic tinkerer, RingerBringer inspires you to generate layered frequencies and harmonics, explore a wide range of sonic possibilities for guitar, bass, synthesizers & beyond, and design your own sounds from the ground up. Extensive controls including LFO, MOD, FREQ (FREQUENCY) & RATE open up sonic possibilities that range from subtle overdriven textures all the way to wobbling, warped leads soaked in texture and tone. RingerBringer is 100% analog and sports premium components including hand-selected op-amps and transistors. RingerBringer is no emulation or “patch”, instead it delivers true-to-spec performance of the boutique, analog original.
Alien Octaver
Harmonic Dissonance
Swamp Trem
| Weight | 1.07 kg |
|---|---|
| Dimensions | 20.57 × 17.53 × 10.41 cm |
| Pedal Type: |
Ring Modulator |
| Analog/Digital: |
Analog |
| Inputs: |
1 x 1/4" (audio in), 1 x 1/4" (carrier in) |
| Outputs: |
1 x 1/4" (audio out), 1 x 1/4" (carrier out), 1 x 1/4" (LFO out) |
| Other I/O: |
4 x 1/4" (CV in: Rate, Amount, Mix, Freq) |
| Bypass Switching: |
Buffered Bypass |
| Power Source: |
9V DC power supply (sold separately) |
| Power Usage: |
100mA |
| Batteries: |
1 x 9V |
Related products
Warm Audio WA-19 Dynamic Microphone – Nickel
- Dynamic Microphone with Cardioid Polar Pattern
- 30Hz - 18Khz Frequency Response
- Exemplary clone of the 1960s’ most famous mics — most associated with The Beatles
- Fantastic choice for drum overheads, bottom snare, acoustic guitar, voice, guitar cabs, and much more
- Variable highpass filter @50Hz with 0 to -10dB range
- Ventilated slots on the body reduce proximity effect and enable you to close-mic louder sources
- 145dB Max SPL
Warm Audio WA-47F Large-Diaphragm Cardioid FET Condenser Microphone
- Large-diaphragm FET Condenser Microphone with Cardioid
- Polar Pattern, Custom TAB-Funkenwork Output Transformer,
- Gold-sputtered, large diaphragm, single-backplate, K47-style capsule for era accurate design
- High-SPL handling (Max 137dB, or 147dB with 10dB engaged)
- Frequency response of 40Hz–16kHz
- Cardioid polar pattern is precise, and pure, ideal for nuanced details
- Output impedance of 150 ohms
Warm Audio WA-47Jr Large-diaphragm Condenser Microphone – Black
- Large-Diaphragm FET Transformerless Condenser Microphone
- Polar Patterns: Cardioid, Figure-8, & Omnidirectional
- Toshiba FETs, Wima film capacitors, Panasonic electrolytic capacitors
- 10 dB Pad | 70 Hz High-Pass Filter
- Custom ’47-style k47 34mm gold-sputtered, dual-diaphragm, single–back plate
- Dynamic range: 138dBA
- Includes shockmount, hardmount, and zipper storage pouch
Warm Audio WA-47T Large-diaphragm Tube Condenser Microphone – Limited-edition Titanium
- Large-Diaphragm Tube Condenser Microphone with 9 Polar Patterns
- External PSU, Shockmount, and Wood Presentation Box
- Custom reproduction '47-style k47 capsule
- TAB-Funkenwerk (AMI) USA output transformer
- JJ Slovak 5751 vacuum tube
- Wima and Solen French polystyrene capacitors
- Includes wood presentation box, shockmount, and IEC power cable
Warm Audio WA-MPX 1-channel Tube Mic/Line/Instrument Preamp
- 1-channel Tube Mic/Line/Instrument Preamp with 90dB of Gain
- Authentic reproduction of the coveted “351” tape machine tube preamp
- Fully discrete, handwired and handbuilt construction
- Selectable Tape saturation adds harmonic distortion and natural compression
- Custom-wound, large-core CineMag USA transformers
- Tone switch modifies mic input transformer impedance
- 600Ω output attenuator
Warm Audio WA87 R2 Large-diaphragm Condenser Microphone – Black
- Large-Diaphragm FET Condenser Microphone
- Switchable 10 dB Pad & 80 Hz High Pass Filter
- Three Polar Patterns: Cardioid, Figure-Of-Eight, And Omnidirectional
- Included Accessories: Wooden Storage Case, Hard Mount, & Shock Mount
- Color: Available In Nickel Or Black Finish
- 24k gold-plated, 3 pin XLR (150 ohms)
- SPL (.5% THD): 132dB (pad engaged), 125dB (pad disengaged)
Warm Audio Warm Lifter Inline Active Microphone Preamp
- Inline active microphone preamp with 26dB Of true analog gain
- Ultra-low noise JFET input, balanced I/O signals
- Operates on +48V phantom power
- Selectable highpass filter (100Hz) and selectable high-shelf boost (3kHz)
- Input impedance at 2.4k Ohm
- Rugged, top-quality construction
- Built and inspected in Austin, Texas