Warm Audio WA-MPX 1-channel Tube Mic/Line/Instrument Preamp
AED 2,784.000 Excl. VAT
- 1-channel Tube Mic/Line/Instrument Preamp with 90dB of Gain
- Authentic reproduction of the coveted “351” tape machine tube preamp
- Fully discrete, handwired and handbuilt construction
- Selectable Tape saturation adds harmonic distortion and natural compression
- Custom-wound, large-core CineMag USA transformers
- Tone switch modifies mic input transformer impedance
- 600Ω output attenuator
Available on backorder
WA-MPX
Single-Channel Tube Microphone Preamp
Authentic Reproduction Of The Most Revered Tape-Era Tube Mic Preamp
Tape-Era Tube Warmth
The WA-MPX & WA-2MPX are authentic reproductions of the most revered microphone tube preamps that pioneered the birth of rock ‘n’ roll & radio-ready hits. During the golden era of tape recording, the original 351-style tube preamps were the kings of studio tech delivering pure analog warmth; the signature sound in the signal chain of hit recordings for artists including Elvis Presley, Bing Crosby, Les Paul, Nat King Cole, and Roy Orbison.
An Authentic Vintage Experience
The WA-MPX preamps deliver the same sonic signature as their vintage inspiration, imparting high-headroom analog warmth that goes from ultra clean to rude and saturated. Each channel boasts a handwired circuit containing custom CineMag transformers and three tubes that, with the high-gain switch engaged, bring the WA-MPX up to an incredible 90dB of gain. The WA-MPX not only delivers the sound of a legendary tape-era tube preamp but one of the best values in an all-tube mic preamp on the market today.
The classic Warm Audio “tone” control alters the input transformer impedance from 600Ω to 150Ω,, adding “air” or “sheen” to the top end – great for ribbons or “darker” mics.
The “high gain” switch engages an extra 20dB of tube gain to take the WA-MPX all the way to 90dB – very useful on lower output dynamic and ribbon mics
The Tape Saturation control engages a discrete circuit in the signal that adds focused tone filtering to emulate the sound of tape machines running at 15IPS, adding just enough imperfection to the signal, especially when used on program material for mixing and mastering.
The switchable 80 Hz high pass filter makes it easy to remove unruly bass noise from sources before you even hit record. The 2 kHz low pass filter allows you to chop off upper-mids and harsh highs for a uniquely Lo-Fi sound.
Weight | 5.36 kg |
---|---|
Dimensions | 61.72 × 30.48 × 13.97 cm |
Preamp Type: |
Tube |
Number of Channels: |
1 |
Phantom Power: |
Yes |
Polarity Switch: |
Yes |
EQ: |
80Hz highpass filter, 2kHz lowpass filter |
Tubes: |
2 x 12AX7, 1 x 12AU7 |
Analog Inputs: |
1 x XLR, 1 x 1/4" TRS, 1 x 1/4" Hi-Z (front) |
Analog Outputs: |
1 x XLR, 1 x 1/4" TRS |
Frequency Response: |
20Hz-20kHz |
Rack Spaces: |
2U |
Power Source: |
Standard IEC AC cable |
Related products
Warm Audio WA-251 Large-Diaphragm Tube Condenser Microphone
- Large-diaphragm Tube Condenser Microphone with 3 Polar Patterns
- External PSU, Shockmount, and Wood Presentation Box
- Faithful replica of the classic ’251-style large-diaphragm condenser mic
- Custom all-brass CK-12-style capsule
- Custom CineMag USA transformer
- JJ Slovak 12AY7 vacuum tube
- Gotham 5-meter GAC-7 7-pin tube microphone cable
Warm Audio WA-84 Small-diaphragm Condenser Microphone Black – Pair
Warm Audio WA-84 Stereo Microphone Pair with Omni & Cardioid Capsules – Nickle
Warm Audio WA-87 R2 TS Large-diaphragm Condenser Microphone Stereo Pair – Limited-edition Titanium
Warm Audio WA-CX12 Large-Diaphragm 9-Pattern Tube Condenser Microphone
- Large-diaphragm Tube Condenser Microphone with 9 Polar Patterns
- Premium Tube, and 7-pin GAC-7 Cable
- Custom edge-terminated, dual-backplate, all-brass vintage CK12-style capsule
- Custom TAB-Funkenwerk (AMI) USA output transformer
- Premium 12AY7 vacuum tube
- Frequency response range of 30Hz–20kHz
- Max SPL of 149dB
Warm Audio WA-MBA Broadcast Boom Arm
- Broadcast Microphone Boom Arm
- Professional-grade broadcast boom arm for podcasting
- Easy-to-grab tension hinges make positioning your mic extra easy
- Hidden internal cable management design keeps your setup clutter-free
- 3/8-inch and 5/8-inch threading of this arm is compatible with all standard mic mounting hardware
Warm Audio WA12 MKII Single-Channel Preamplifier – Black
- 1-channel Mic/Instrument Preamp with 71dB of Gain
- Fully discrete design with a robust 71dB of gain to power all your mics
- High-voltage X731 operational amplifier, based on the classic Melcor 1731
- Tone button gives you tonal versatility
- 48-volt phantom power, 20dB pad, and polarity invert switches
- Mic level balanced input: XLR or 1/4″ TRS
- Balanced outputs: XLR and 1/4″ TRS
Warm Audio Warm Lifter Inline Active Microphone Preamp
- Inline active microphone preamp with 26dB Of true analog gain
- Ultra-low noise JFET input, balanced I/O signals
- Operates on +48V phantom power
- Selectable highpass filter (100Hz) and selectable high-shelf boost (3kHz)
- Input impedance at 2.4k Ohm
- Rugged, top-quality construction
- Built and inspected in Austin, Texas