sE Electronics sE6160
Supercardioid/Lobar Shotgun Condenser Microphone
- Broadcast, Video Shoots, and Spot Miking
- Handcrafted True Condenser Capsule
- Supercardioid Pattern for Tight Pickup
- High Gain Before Feedback
- Gold-Sputtered Diaphragm
- Switchable -10 or -20 dB Pad
- Selectable 80 or 160 Hz Low-Cut Filter
Description
sE6160
Astonishing results, no matter where you aim it.
Recommended Use
Live Sound IEM crowd noise, On-set dialogue, Broadcasting in noisy environments, Spot miking orchestras for hard-to-reach instruments
Highlights
- Handcrafted true condenser capsule
- Tight polar pattern ensures high gain-before-feedback without colorization
- Superior sound quality provides a stunning in-ear mix and live recording at the same time
- Roadworthy die-cast housing and solid construction for maximum robustness
- Switchable pre-attenuation pad
- Switchable low-cut filter
- Available as single or a factory-matched pair
HANDCRAFTED TRUE CONDENSER CAPSULE
New in-house designed and handcrafted true condenser capsule with a gold-sputtered diaphragm ensures crystal clarity and uncolored sound
PRECISION CONTROL WITH DUAL-STAGE ATTENUATION SWITCH
The attenuation switch allows you to reduce the microphone's signal by 10 or 20 decibels. This can be helpful for loud sources, preventing overload on your audio interface. When this switch is in center position, it has no effect on the microphone output.
FLEXIBLE BASS MANAGEMENT WITH LOW-CUT FILTER SWITCH
The low-cut switch allows you to adjust the bass response of your source. When engaged, the microphone's low-frequency response is rolled off 80 or 160 Hz. When this switch is in center position, it has no effect on the microphone output.
Specs
Components
CapsuleHand-crafted small-diaphragm true condenser capsule
Power
Electrical impedance110 Ohms
Connectivity3-pin male XLR
Sound
Polar patternsShotgun (super-cardioid/lobar)
Frequency range20 – 20,000 Hz
Sensitivity25 mV/Pa (-32 dBV)
Noise Level13 dB(A)
Max. SPL (0.5% THD)137 / 147 / 157 dBSPL (0/10/20 dB attenuation pad)
Dynamic range124 / 134 / 144 dB (0/10/20 dB attenuation pad)
Dimensions
Mic Diameter19.6 mm (0.77 in.)
Mic length250 mm (9.84 in.)
Mic weight110 g (3.88 oz.)
What's in the box
sE6160 Microphone
Mic Clip
Thread Adapter
Windscreen
Soft Case
Additional information
| Weight | 1.15 kg |
|---|---|
| Dimensions | 36.83 × 25.4 × 9.144 cm |
| Polar Pattern: |
Supercardioid / Lobar |
| Element Type: |
Condenser |
| Controls: |
Low Cut/HPF, Pad |
| Frequency Response: |
20 Hz to 20 kHz |
| Maximum SPL: |
137 dB (Pad Disengaged) |
| Analog Output: |
1x XLR 3-Pin Male (Locking) |
| Power Sources: |
Phantom Power |
Related products
sE Electronics BL8 Cardioid Boundary Microphone
- Cardiod Boundary Microphone with Condenser Capsule
- Condenser capsule supplies pristine sound pickup
- Character switch imparts classic or modern sound quality to your signal
- Switchable low-cut filter tames the low end when needed
- Attenuation switch gives you two input pads
- Low-profile design effortlessly fits into confined spaces
- Compatible with Kelly Shu microphone mounts
sE Electronics DM1 Dynamite Active In-Line Microphone Preamplifier – Red
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 28dB of Gain
- Adds +28dB of clean gain to low-output passive microphones for proper gain staging
- Class A electronics offer a neutral sound
- Output buffer ensures the unit provides consistent gain regardless of load
- Low output impedance ensures you get a clean signal regardless of cable length
- Gold-plated connectors offer a loss-free and reliable connection
- Rugged metal housing stands up to punishment
sE Electronics NEOM USB Cardioid Condenser Microphone
- Plug-and-play USB condenser microphone
- Cardioid polarity with focused recording
- Ultra-low latency design for lag-free audio and streaming
- Independent knob controls for level, gain, and playback volume
- Onboard mute button
- Built-in headphone port
- Universal mic shaft that’s ready for use with studio equipmen
sE Electronics Reflexion Filter X Portable Vocal Booth – White
- Portable Acoustic Treatment/Reflexion Filter to Reduce Room Ambience
- Proven four-layer acoustic filter design
- Multi-layer to ensure almost zero sound coloration
- Capture a great-sounding recording anywhere
- Just like the RF Pro and RF SPACE, each RF-X is assembled by hand in the sE factory
- Now available in multiple finishes
- Provides stellar performance and ease-of-use
sE Electronics RNT Rupert Neve Signature Series Multi-Pattern Tube Condenser Microphone
- Large-diaphragm Tube Condenser Microphone with 9 Polar Patterns
- Fully discrete, Class-A electronics in both active stages
- The finest true condenser capsule we've ever built
- The same custom op-amps used in Rupert Neve Designs' flagship 5088 console
- Switchable gain and a massive dynamic range
- 9-position polar pattern switch for precise balance between direct and ambient sound
sE Electronics V Kick Dynamic Percussion Instrument Microphone
- Dynamic Kick Drum Microphone with Supercardioid Polar Pattern
- Switchable Classic/Modern voicing
- One of the most compact kick drum mics on the market
- Purpose-built capsule designed to capture low frequencies at high SPLs
- Patented internal shockmount
- Sophisticated supercardioid capsule design
- All-metal housing with premium finish
sE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone
- with -10dB/-20dB Pad and Low-cut Filters
- Custom-designed hand-crafted true condenser capsule individually tuned
- A refined version of sE's best-selling X1
- Improved sensitivity, dramatically increased SPL handling (up to 160dB!)
- Hand-made metal housing and gold-sputtered diaphragms
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads