sE Electronics sE6160
Supercardioid/Lobar Shotgun Condenser Microphone
- Broadcast, Video Shoots, and Spot Miking
- Handcrafted True Condenser Capsule
- Supercardioid Pattern for Tight Pickup
- High Gain Before Feedback
- Gold-Sputtered Diaphragm
- Switchable -10 or -20 dB Pad
- Selectable 80 or 160 Hz Low-Cut Filter
Description
sE6160
Astonishing results, no matter where you aim it.
Recommended Use
Live Sound IEM crowd noise, On-set dialogue, Broadcasting in noisy environments, Spot miking orchestras for hard-to-reach instruments
Highlights
- Handcrafted true condenser capsule
- Tight polar pattern ensures high gain-before-feedback without colorization
- Superior sound quality provides a stunning in-ear mix and live recording at the same time
- Roadworthy die-cast housing and solid construction for maximum robustness
- Switchable pre-attenuation pad
- Switchable low-cut filter
- Available as single or a factory-matched pair
HANDCRAFTED TRUE CONDENSER CAPSULE
New in-house designed and handcrafted true condenser capsule with a gold-sputtered diaphragm ensures crystal clarity and uncolored sound
PRECISION CONTROL WITH DUAL-STAGE ATTENUATION SWITCH
The attenuation switch allows you to reduce the microphone's signal by 10 or 20 decibels. This can be helpful for loud sources, preventing overload on your audio interface. When this switch is in center position, it has no effect on the microphone output.
FLEXIBLE BASS MANAGEMENT WITH LOW-CUT FILTER SWITCH
The low-cut switch allows you to adjust the bass response of your source. When engaged, the microphone's low-frequency response is rolled off 80 or 160 Hz. When this switch is in center position, it has no effect on the microphone output.
Specs
Components
CapsuleHand-crafted small-diaphragm true condenser capsule
Power
Electrical impedance110 Ohms
Connectivity3-pin male XLR
Sound
Polar patternsShotgun (super-cardioid/lobar)
Frequency range20 – 20,000 Hz
Sensitivity25 mV/Pa (-32 dBV)
Noise Level13 dB(A)
Max. SPL (0.5% THD)137 / 147 / 157 dBSPL (0/10/20 dB attenuation pad)
Dynamic range124 / 134 / 144 dB (0/10/20 dB attenuation pad)
Dimensions
Mic Diameter19.6 mm (0.77 in.)
Mic length250 mm (9.84 in.)
Mic weight110 g (3.88 oz.)
What's in the box
sE6160 Microphone
Mic Clip
Thread Adapter
Windscreen
Soft Case
Additional information
| Weight | 1.15 kg |
|---|---|
| Dimensions | 36.83 × 25.4 × 9.144 cm |
| Polar Pattern: |
Supercardioid / Lobar |
| Element Type: |
Condenser |
| Controls: |
Low Cut/HPF, Pad |
| Frequency Response: |
20 Hz to 20 kHz |
| Maximum SPL: |
137 dB (Pad Disengaged) |
| Analog Output: |
1x XLR 3-Pin Male (Locking) |
| Power Sources: |
Phantom Power |
Related products
sE Electronics BL8 Cardioid Boundary Microphone
- Cardiod Boundary Microphone with Condenser Capsule
- Condenser capsule supplies pristine sound pickup
- Character switch imparts classic or modern sound quality to your signal
- Switchable low-cut filter tames the low end when needed
- Attenuation switch gives you two input pads
- Low-profile design effortlessly fits into confined spaces
- Compatible with Kelly Shu microphone mounts
sE Electronics guitaRF Reflexion Filter with Stand
- Portable Iso Booth Designed Specifically for Miking Guitar Cabinets
- A Reflexion Filter for your guitar cab to provide isolation on loud stages
- Used in venues to help control instrument bleed
- A friendly studio companion that provides additional isolation
- A dual mic mount ensures a safer on-stage experience
- Thanks to its dual mic mount, experience immediate phase alignment
- Minimal stage bleed and coloration allows the ideal filtration
sE Electronics NEOM USB Cardioid Condenser Microphone
- Plug-and-play USB condenser microphone
- Cardioid polarity with focused recording
- Ultra-low latency design for lag-free audio and streaming
- Independent knob controls for level, gain, and playback volume
- Onboard mute button
- Built-in headphone port
- Universal mic shaft that’s ready for use with studio equipmen
sE Electronics Reflexion Filter X Portable Vocal Booth
- Portable Acoustic Treatment/Reflexion Filter to Reduce Room Ambience
- Proven four-layer acoustic filter design
- Multi-layer to ensure almost zero sound coloration
- Capture a great-sounding recording anywhere
- Just like the RF Pro and RF SPACE, each RF-X is assembled by hand in the sE factory
- Now available in multiple finishes
- Provides stellar performance and ease-of-use
sE Electronics sE2200 Large-diaphragm Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone with 80/160Hz
- Hand-crafted 1” true condenser capsule individually tuned in our own factory
- The same condenser microphone loved by an entire generation of engineers
- Traditional Class-A electronic design with consistent low-noise performance
- Custom-built output transformer and massively shielded all-metal housing
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads
sE Electronics sE4100 Large-Diaphragm Condenser Microphone
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- Twin 1" Gold-sputtered Brass Capsule
- 80Hz/160Hz Low-cut Filters, and -10dB-/20dB Pads
- The cardioid-only version of the renowned sE4400
- The very same hand-crafted twin 1“ gold-sputtered brass capsule as the sE4400
- True condenser cardioid capsule
- Individually tuned in our own factory
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration