sE Electronics DM2 TNT Active In-Line Microphone Preamplifier – Black
AED 465.000 Excl. VAT
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 15dB – 30dB of Gain
- Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
- Eight load settings ranging from 50 ohms to 10 mega ohms to precisely match any mic
- Sophisticated class-A design and specially-selected high-grade FETs for a signal boost w/o coloration
- Vastly lower output impedance and nearly half the noise of anything else on the market
- All-metal housing and premium finish
- Gold plated XLR connector for loss-free reliable signal connection
In stock
DM2 TNT
Explosive level for all your passive mics
The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone.
Inside the DM2 TNT
SIGNIFICANTLY IMPROVED LEVEL TO YOUR MIC PREAMP
The DM2 provides switchable +15dB or +30dB of consistent gain regardless of the connected load, thanks to its dedicated buffer amplifier providing you more flexibility for your particular applications.
CLASS-A DESIGN & LOWEST NOISE IN ITS CLASS
Class-A design and specially-selected high-grade FETs enable vastly lower output impedance and the lowest noise in its class providing the gain needed to for a clean sound and much less noise.
MATCH THE IMPEDANCE OF YOUR FAVORITE MIC
From an unconventionally low 50 ohms to stunningly high 10 mega ohms to match your preamp with any mic accurately to ruthlessly boost the signal independent from load impedance or cable length.
DEDICATED OUTPUT BUFFER AMPLIFIER & RELIABLE SIGNAL CONNECTION
The output impedance is also the lowest in its class, allowing long cable runs while reducing susceptibility to RF interference, buzz and hum with a gold-plated XLR connector for loss-free signal connection.
SLIM, RUGGED ALL-METAL HOUSING & PREMIUM FINISH
Reliable operation in demanding environments & on-stage applications. Robust construction with high-quality manufacturing standards.
NOW ALSO VAILABLE IN BLACK
| Weight | 0.12 kg |
|---|---|
| Dimensions | 16.13 × 3.18 × 3.18 cm |
| Channels: |
1 |
| Features: |
15dB/30dB Gain Boost, 8 Impedance Load Settings |
| Outputs: |
1 x XLR |
| Type: |
Dynamic/Ribbon Mic Booster |
| Inputs |
1 x XLR |
Related products
sE Electronics BL8 Cardioid Boundary Microphone
- Cardiod Boundary Microphone with Condenser Capsule
- Condenser capsule supplies pristine sound pickup
- Character switch imparts classic or modern sound quality to your signal
- Switchable low-cut filter tames the low end when needed
- Attenuation switch gives you two input pads
- Low-profile design effortlessly fits into confined spaces
- Compatible with Kelly Shu microphone mounts
sE Electronics guitaRF Reflexion Filter with Stand
- Portable Iso Booth Designed Specifically for Miking Guitar Cabinets
- A Reflexion Filter for your guitar cab to provide isolation on loud stages
- Used in venues to help control instrument bleed
- A friendly studio companion that provides additional isolation
- A dual mic mount ensures a safer on-stage experience
- Thanks to its dual mic mount, experience immediate phase alignment
- Minimal stage bleed and coloration allows the ideal filtration
sE Electronics RNT Rupert Neve Signature Series Multi-Pattern Tube Condenser Microphone
- Large-diaphragm Tube Condenser Microphone with 9 Polar Patterns
- Fully discrete, Class-A electronics in both active stages
- The finest true condenser capsule we've ever built
- The same custom op-amps used in Rupert Neve Designs' flagship 5088 console
- Switchable gain and a massive dynamic range
- 9-position polar pattern switch for precise balance between direct and ambient sound
sE Electronics sE4100 Large-Diaphragm Condenser Microphone
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- Twin 1" Gold-sputtered Brass Capsule
- 80Hz/160Hz Low-cut Filters, and -10dB-/20dB Pads
- The cardioid-only version of the renowned sE4400
- The very same hand-crafted twin 1“ gold-sputtered brass capsule as the sE4400
- True condenser cardioid capsule
- Individually tuned in our own factory
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone – Matched Pair
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics V7 MK Myles Kennedy Signature Edition Handheld Supercardioid Dynamic Microphone
- Handheld Supercardioid Dynamic Microphone - Myles Kennedy Edition
- Specialized aluminum voice coil offers superb sound reproduction
- Supercardioid capsule yields excellent isolation
- Integrated shockmount eliminates rumble and handling noise
- Internal windscreen
- Both red and black windscreens are included to suit your style
- Beveled edge keeps the mic from rolling around when you set it down
sE Electronics V7 Supercardioid Dynamic Handheld Vocal Microphone
- Handheld Supercardioid Dynamic Microphone
- Specialized aluminum voice coil offers superb sound reproduction
- Integrated shockmount eliminates rumble and handling noise
- Internal windscreen prevents wind noise and plosives
- Both red and black windscreens are included to suit your style
- Beveled edge keeps the mic from rolling around when you set it down
- Gold-plated XLR connector ensures a solid, reliable connection
sE Electronics X1 S Studio Bundle
- Recording Bundle with sE Electronics X1 S Condenser Microphone,
- Isolation Filter, Shockmount, Pop Filter, and 3m Mic Cable.
- Hand-made, gold-sputtered 1" capsule
- All-metal capsule, with no plastic parts for long term reliability
- Fixed cardioid polar pattern
- Switchable -10dB/-20dB pad
- Handles loud sound sources up to 160dB SPL without distortion