sE Electronics DM2 TNT Active In-Line Microphone Preamplifier – Black
AED 465.000 Excl. VAT
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 15dB – 30dB of Gain
- Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
- Eight load settings ranging from 50 ohms to 10 mega ohms to precisely match any mic
- Sophisticated class-A design and specially-selected high-grade FETs for a signal boost w/o coloration
- Vastly lower output impedance and nearly half the noise of anything else on the market
- All-metal housing and premium finish
- Gold plated XLR connector for loss-free reliable signal connection
In stock
DM2 TNT
Explosive level for all your passive mics
The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone.
Inside the DM2 TNT
SIGNIFICANTLY IMPROVED LEVEL TO YOUR MIC PREAMP
The DM2 provides switchable +15dB or +30dB of consistent gain regardless of the connected load, thanks to its dedicated buffer amplifier providing you more flexibility for your particular applications.
CLASS-A DESIGN & LOWEST NOISE IN ITS CLASS
Class-A design and specially-selected high-grade FETs enable vastly lower output impedance and the lowest noise in its class providing the gain needed to for a clean sound and much less noise.
MATCH THE IMPEDANCE OF YOUR FAVORITE MIC
From an unconventionally low 50 ohms to stunningly high 10 mega ohms to match your preamp with any mic accurately to ruthlessly boost the signal independent from load impedance or cable length.
DEDICATED OUTPUT BUFFER AMPLIFIER & RELIABLE SIGNAL CONNECTION
The output impedance is also the lowest in its class, allowing long cable runs while reducing susceptibility to RF interference, buzz and hum with a gold-plated XLR connector for loss-free signal connection.
SLIM, RUGGED ALL-METAL HOUSING & PREMIUM FINISH
Reliable operation in demanding environments & on-stage applications. Robust construction with high-quality manufacturing standards.
NOW ALSO VAILABLE IN BLACK
| Weight | 0.12 kg |
|---|---|
| Dimensions | 16.13 × 3.18 × 3.18 cm |
| Channels: |
1 |
| Features: |
15dB/30dB Gain Boost, 8 Impedance Load Settings |
| Outputs: |
1 x XLR |
| Type: |
Dynamic/Ribbon Mic Booster |
| Inputs |
1 x XLR |
Related products
sE Electronics NEOM USB Cardioid Condenser Microphone
- Plug-and-play USB condenser microphone
- Cardioid polarity with focused recording
- Ultra-low latency design for lag-free audio and streaming
- Independent knob controls for level, gain, and playback volume
- Onboard mute button
- Built-in headphone port
- Universal mic shaft that’s ready for use with studio equipmen
sE Electronics RF PRO Reflexion Filter PRO
- Portable Acoustic Treatment to Reduce Room Ambience
- The original Reflexion Filter invented by sE
- Patented multi-layer technology
- Works evenly across the whole frequency spectrum
- Ensures a balanced, even sound with no coloration at all
- The choice of renowned recording artists worldwide
- Each Reflexion Filter is hand-made in our very own factory
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone – MATCHEDPAIR
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- cardioid, omnidirectional, figure-eight, and hypercardioid
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics V Kick Dynamic Percussion Instrument Microphone
- Dynamic Kick Drum Microphone with Supercardioid Polar Pattern
- Switchable Classic/Modern voicing
- One of the most compact kick drum mics on the market
- Purpose-built capsule designed to capture low frequencies at high SPLs
- Patented internal shockmount
- Sophisticated supercardioid capsule design
- All-metal housing with premium finish
sE Electronics V7 MC1 Capsule for Shure Wireless
- Supercardioid Dynamic Microphone Capsule for Shure Wireless Systems
- Captures your voice in the most natural way you've ever heard on stage
- All-metal beveled spring grille
- Specialized supercardioid aluminum voice coil
- Patented integrated shockmount
- Switchable internal windscreen
- Available in two different color combinations