Marshall MX112R – 1×12 Cabinet
915.00 Excl. VAT
- 1 x 12-in. extension cabinet voiced for DSL20HR heads and DSL20CR combos
- Celestion Seventy 80 speaker yields a muscular British sound with robust mids and gut-punching top end
- Exhibits deep bass, smooth mids, colorful highs, and epic power handling
- Complements any style of music and brings out the best in your amplifier
Available on backorder
Description
The Perfect Match for Your DSL Head or Combo
The Marshall MX112 is the perfect complement to your DSL20HR head or DSL20CR combo. This 1 x 12-inch extension cabinet is loaded with a Celestion Seventy 80 speaker, which yields a muscular British sound with robust mids and gut-punching top end. Hook it up, and you’ll experience deep bass, smooth mids, colorful highs, and epic power handling. No matter what style of music you’re playing, the MX112 will bring out the best in your amplifier. Complete with the iconic Marshall logo, the MX112 is a great way to expand your DSL’s capabilities.
Additional information
| Weight | 12.64 kg |
|---|---|
| Dimensions | 53 × 33.5 × 53 cm |
| Configuration: | 1 x 12″ |
| Powered: | No |
| Speakers: | Celestion Seventy 80 |
| Power Handling: | 80W |
| Impedance: | 16 ohms |
| Mono/Stereo: | Mono |
| Cabinet Type: | Straight |
| Open/Closed Back: | Closed |
| Inputs: | 1 x 1/4″ |
| Construction Material: | MDF with Black Tolex |
You may also like…
Marshall 1974CX – 1×12″ Extension Cabinet for 1974X
- 20W, open-back, 1 x 12-inch speaker cabinet
- Exquisitely handwired with old-school construction methods
- Built with reproduced components for maximum authenticity
- Celestion G12M-20 Greenback speaker has been "aged" for true-to-life vintage tone
- 15Ω mono operation
- Robust birch construction with finger-locked joints
- Boasts an eye-grabbing, Bluesbreaker-inspired look
Marshall MX212AR – 2×12 Angled Upright Cabinet
- 2 x 12" extension cabinet voiced for DSL20HR heads
- Celestion Seventy 80 speakers yield a muscular British sound with robust mids and gut-punching top end
- Exhibits deep bass, smooth mids, colorful highs, and epic power handling
- Angled speaker baffle delivers maximum sound projection
- Compliments any style of music and brings out the best in your amplifier
Marshall SC112 – 1×12 Speaker cabinet
- 1 x 12" open-back extension cabinet
- Celestion G12 V-Type speaker has a balanced tonal signature that imparts a vintage musicality
- Clean sounds are true across the lows, mids, and highs, with just enough upper-mid chime and high-frequency sparkle to add clarity and definition
- Crank it up for sizzling overdrive and raw rock tone, with plenty of midband warmth
- Matches the aesthetics of your Studio Classic amplifier
Marshall SC212 – 2×12 Speaker cabinet
- 2 x 12" closed-back extension cabinet
- Celestion G12 V-Type speakers have a balanced tonal signature that imparts a vintage musicality
- Clean sounds are true across the lows, mids, and highs, with just enough upper-mid chime and high-frequency sparkle to add clarity and definition
- Crank it up for sizzling overdrive and raw rock tones with plenty of midband warmth
- Slanted design ensures top-notch projection
- Matches the aesthetics of your Studio Classic amplifier
Related products
Marshall 1960AV – 280W 4×12″ Switchable Mono / Stereo Angled Cabinet
- 280W, closed-back, 4 x 12-inch speaker cabinet
- Packs '80s-era sonic characteristics into a '60s-style enclosure
- Marshall G12 Vintage by Celestion speakers yield loads of low-end thump and high-end sizzle
- 16/4Ω mono, 8Ω stereo operation
- Angled design produces a brighter sound than a straight cabinet
- Features robust birch construction
- Includes casters for easier transport
Marshall 1960AX – 4×12″ 100W Classic Angled Cabinet
- 4 x 12" vintage style speaker cabinet
- 25-watt Celestion G12-25 Greenback speakers
- 1970s checkered grille cloth and gold piping
- Small size white logo
- Black levant vinyl/white beading on cabinet
- Finger-locked joints are used on all 4 corners of the frame
- Castors are standard and can be removed if desired
- 100-watt power capacity
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JVM210C – 100 Watt All Valve 2×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speaker
Marshall PEDL-90011 – 1 Way Latching Pedal – Channel change
- Simple, no-frills pedal with a single latching switch for channel selection.
- A bright, built-in LED indicates which channel is active
- Designed to work exclusively with the Marshall DSL1H and DSL1C from the 2018 DSL1 series.
- Built with a "road-ready metal" casing
- Pedal does not require a battery or an external power source.
- Draws power for the LED directly from the amplifier via the attached cable.
- It features a fixed, hard-wired cable with a 1/4-inch jack