Marshall JVM210H – 100 Watt All Valve 2 Channel Head
5,865.00 Excl. VAT
- 100 watts
- All-tube design includes 5 x 12AX7s and 4 x EL34s
- 2 totally independent, footswitchable channels – clean/crunch and overdrive
- Each channel has 3 footswitchable modes – green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops – 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Available on backorder
Description
MULTIPLE CHANNELS, EACH WITH DEDICATED VOLUME CONTROLS
The JVM210 Head brings you to the front of the stage. With one master volume for each channel, you can create explosive solo moments that will be impossible to ignore.
BUILT-IN REVERB OPTIONS
Step out of your comfort zone with built-in reverb controls. Experiment with your sound and unleash breathtaking solos that will leave a lasting impression.
STORE YOUR SETTINGS
Recall your mode, master and reverb options with the programmable footswitch (included). This gives you power and flexibility exactly when and where you need it.
Additional information
| Weight | 24.74 kg |
|---|---|
| Dimensions | 82 × 27.6 × 42.4 cm |
| Configuration: | 4 x 12″ |
| Powered: | No |
| Speakers: | Celestion G12M-25 Greenback |
| Power Handling: | 100W |
| Impedance: | 16 ohms |
| Mono/Stereo: | Mono |
| Cabinet Type: | Angled |
| Open/Closed Back: | Closed |
| Inputs: | 1 x 1/4″ |
| Construction Material: | Birch Plywood |
| Casters: | Yes |
You may also like…
Marshall 1960AV – 280W 4×12″ Switchable Mono / Stereo Angled Cabinet
- 280W, closed-back, 4 x 12-inch speaker cabinet
- Packs '80s-era sonic characteristics into a '60s-style enclosure
- Marshall G12 Vintage by Celestion speakers yield loads of low-end thump and high-end sizzle
- 16/4Ω mono, 8Ω stereo operation
- Angled design produces a brighter sound than a straight cabinet
- Features robust birch construction
- Includes casters for easier transport
Marshall 1960BV – 280W 4×12″ Switchable Mono / Stereo Base Cabinet
- 280W, closed-back, 4 x 12-inch speaker cabinet
- Packs '80s-era sonic characteristics into a '60s-style enclosure
- Marshall G12 Vintage by Celestion speakers yield loads of low-end thump and high-end sizzle
- 16/4Ω mono, 8Ω stereo operation
- Straight design producers a thicker sound than an angled cabinet
- Features robust birch construction
- Includes casters for easier transport
Related products
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1974CX – 1×12″ Extension Cabinet for 1974X
- 20W, open-back, 1 x 12-inch speaker cabinet
- Exquisitely handwired with old-school construction methods
- Built with reproduced components for maximum authenticity
- Celestion G12M-20 Greenback speaker has been "aged" for true-to-life vintage tone
- 15Ω mono operation
- Robust birch construction with finger-locked joints
- Boasts an eye-grabbing, Bluesbreaker-inspired look
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JVM205H – 50 Watt All Valve 2 Channel Head
- 50-watt all-tube amp head
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has three footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Marshall JVM410C – 100 Watt All Valve 2×12″ 4 Channel Combo
- 100-watt 2 x 12" Combo
- Marshall G-12 Vintage and Celestion 12" speakers
- 5 x ECC83 (12AX7s) and 4 x EL34s
- 4 independent channels
- 3 footswitchable modes
- Studio quality digital reverb
- 2 footswitchable master volumes
- 2 FX loops - series/parallel
- Emulated line-out
- 6-way footswitch with memory
- Channel switching via MIDI
Marshall SC20C – 20W Valve amp combo
- Packs the incendiary tone of a JCM800 2203 into a 20-watt combo
- 10" Celestion V-Type speaker serves up classic British tone
- Conjures up everything from rich and full cleans to high-gain mayhem
- Separate Preamp Volume and Master Volume controls allow for high-gain tones at low volumes
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5 watts
- DI output for easy recording or routing to a PA