Focusrite RedNet A16R MkII Rackmount 16×16 Dante Analog Audio Interface
15,995.00 Excl. VAT
- 16-channel bi-directional analogue interface for Dante networks
- Precision A-D and D-A conversion
- with 119dB dynamic range, flat from 20Hz – 20 kHz (+/- 0.15dB).
- Individual input/output channel level control
- Dual PSUs with locking IEC inlets.
- Dual locking etherCON connectors
- Power supply and ethernet redundancy with auto switchover
In stock
RedNet A16R MkII
16-in/16-out Dante Network Interface with Network and Power Supply Redundancy
RedNet A16R MKII is a 16-channel analogue Interface for Dante networks, with two channels of AES3 I/O. Individual input and output channel level controls allow for precise adjustment of all I/O levels using RedNet Control. With two power supplies and primary and secondary etherCON network connectors, RedNet A16R MKII is perfect for critical-path applications in recording, post-production, live sound and broadcast. Built-in redundancy features allow for silent fail-over in the event of power or network outage, providing reassurance for system technicians.
Analogue inputs and outputs are connected through four rear-panel AES59-configured DB25 connectors, while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. The XLR input can accept DARS signals in addition to AES3. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A16R MKII, or alternatively allows RedNet A16R MKII to act as a network clock grand master, synchronised to external input. RedNet A16R MKII is well suited to permanent installation and repeated strike and setup: all connectors lock and remain terminated even under stress, providing worry-free installation and peace of mind once situated in a rack. In addition, all Focusrite products come with a three-year warranty and award-winning customer support.
16×16 AES3 I/O with independent level control
The RedNet A16R MkII is a 16-channel bi-directional AES3 interface for Dante® networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet A16R MkII features power supply and Ethernet redundancy with auto switchover in case of failure.
Various connection options make RedNet A16R MkII a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S/PDIF connections, respectively, to be made.
Sample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.
Brainworx bx_console
The Focusrite Studio Console reborn in your DAW
| Weight | 6.34 kg |
|---|---|
| Dimensions | 60.45 × 43.69 × 11.18 cm |
| A/D Resolution: | Up to 24-bit/192kHz |
| Analog Inputs: | 2 x DB-25 |
| Data I/O: | 2 x Ethernet (Dante) |
| Digital Inputs: | 1 x XLR (AES3) |
| Digital Outputs: | 1 x XLR (AES3) |
| Network: | Dante, RedNet |
| OS Requirements | Mac: OS X 10.9.5 or later PC: Windows 7 SP1 or later |
| Power Supply: | 2 x Standard IEC AC cables |
| Rack Spaces: | 1U |
| Software: | RedNet Control |
| Clock I/O: | 2 x BNC (1 x word clock) |
Related products
Focusrite ISA ADN2 Two-Channel A-D Card for ISA One
- Two-channels of high-quality, precision A/D converter for ISA One
- Up to 24-bit/192kHz sample rate
- Dante connectivity via Primary and Secondary Ethernet ports
- Two-channel XLR connection for AES3 output
- Two-channel RCA connection for S/PDIF output
- Two-channel TOSLINK connector for ADAT output
- Word Clock I/O on BNC connectors
Focusrite Red 16Line 64 x 64 Thunderbolt 3 Audio Interface for Pro Tools | HD
- Connect to Pro Tools | HD, Thunderbolt computers and Dante simultaneously without option cards
- High-performance audio conversion with over 118dB dynamic range A/D and 121dB dynamic range D/A (A-weighted)
- Ultra-low round trip latency to track through plug-ins and record virtual instruments in real time
- 16 line inputs on D-sub, coupled with 16 line outputs and two main monitor outputs
- Two digitally-controlled Red Evolution mic preamps with up to 63dB of ultra-clean gain, stereo linking, individual phantom power, high-pass filter and phase reverse
- Air mode on the preamps, giving recordings the clarity of a transformer-based ISA
- Two Thunderbolt 3 ports as standard to connect additional Thunderbolt products
Focusrite RedNet AM2 Stereo Dante Headphone Amplifier and Line-Out Interface
- Monitor-quality precision digital conversion for Dante networks
- Power to drive even high impedance headphones at significant levels
- Independent headphone and line out level controls
- Integrated mute switch - instantly kill the signal feeding
- Power over Ethernet (PoE) or via included power supply
- Integrated Gigabit Ethernet switch
- Dual XLR line level outputs
Focusrite RedNet D64R 64-Channel MADI-Dante Bridge
- Connects a MADI system and a Dante network seamlessly together.
- Connect Dante to digital mixing consoles, interfaces and cards that use MADI
- Built-in redundancy
- Supports both coax and optical interfaces
- Slave either the Dante system or MADI streams to an external clock.
- Supports up to 64 channels of digital audio I/O
- Sample rate conversion (SRC) on each input and output
Focusrite RedNet R1 Desktop Remote Controller for Red Interfaces / Dante Devices
- Desktop remote controller for Red audio interfaces
- Switch and sum: Supports sum and spill
- Flexible monitor control: Controls include level, reference level, preset selection
- Monitor fold-downs: Up to four fold-down presets
- Talkback & headphones functionality: Four destination groups
- Built-in Microphone
- Precision metering and display: Two LCD displays
Focusrite RedNet X2P 2×2 Dante Audio Interface with Red Evolution Mic Pres
- Two of our best preamps provide ultra-clean gain, stereo linking
- individual phantom power, a high-pass filter, phase reverse and Air mode.
- High-quality conversion, with over 118dB dynamic range.
- Power-over-Ethernet allows a single cable to deliver audio, control and power to RedNet X2P.
- Local input mix allows 'more-me' style monitoring for easy foldback control.
- Mic stand mount keeps the unit out of the way and within reach.
- Local control lockout of mic pre settings, output settings or both.