Focusrite ISA ADN8 8-Channel A-D Card for ISA 428/828 MkII
2,795.00 Excl. VAT
- Eight-channels of high-quality, precision A/D converter for ISA 428 MK2 and ISA 828 MK2
- Up to 24-bit/192kHz sample rate
- Dante connectivity via Primary and Secondary Ethernet ports
- Industry standard eight-channel AES59 DB25 output connection for AES3
- Two TOSLINK connectors for ADAT
- Word Clock I/O on BNC connectors
- RedNet Control and Dante Controller software allow Dante routing and control
Available on backorder
ISA ADN8
8-channel A/D Card
With the introduction of the ISA ADN8, the classic ISA mic pre can be implemented directly on a Dante network, providing console-grade preamps to the most advanced of audio networks. ISA ADN8 is an optional eight-channel A-D card that provides high-quality, precision analogue-to-digital conversion for the Focusrite ISA 428 MK2 and ISA 828 MK2 microphone preamps. Featuring Dante, AES3 and ADAT connectivity, the card operates at sample rates up to 24-bit/192kHz.
The card offers a familiar set of standard professional connectors with primary and secondary RJ45 Dante output ports, an AES59 DB25 connector for AES3 output, and a pair of TOSLINK connectors for ADAT output. Word Clock I/O on BNC connectors allows synchronisation with many external devices.
Dante outputs on the ISA ADN8 provide ISA 428 MK2 and ISA 828 MK2 with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller. RedNet Control software included.
Eight-channel A-D card for ISA 428 MKII and ISA 828 MKII, including Dante connectivity
ISA ADN8 is an optional eight-channel A-D card that provides high-quality analogue-to-digital conversion for the Focusrite ISA 428 MkII and ISA 828 MkII microphone preamps. Featuring Dante, AES3 and ADAT connectivity, the card operates at sample rates up to 24-bit / 192kHz.
The card offers primary and secondary RJ45 Dante output ports, an AES59 DB25 connector for AES3 output, and a pair of TOSLINK connectors for ADAT output. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock, or for syncing external equipment to the Dante network.
Dante outputs on the ISA ADN8 provide ISA 428 MkII and ISA 828 MkII with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.
And as with all Focusrite Pro products, wherever you happen to be in the world, you can rely on a three-year warranty if any Focusrite Pro hardware needs repairing or replacing due to a manufacturing fault.
Brainworx bx_console
The Focusrite Studio Console reborn in your DAW
| Weight | 0.98 kg |
|---|---|
| Dimensions | 27.69 × 21.84 × 6.6 cm |
| A/D Resolution: | 24-bit/192kHz |
| Data I/O: | 2 x Ethernet (Dante: Primary, Secondary), 2 x Optical Toslink (ADAT), 1 x DB-25 (AES3) |
| Clock I/O: | In/Out |
Related products
Focusrite Red 16Line 64 x 64 Thunderbolt 3 Audio Interface for Pro Tools | HD
- Connect to Pro Tools | HD, Thunderbolt computers and Dante simultaneously without option cards
- High-performance audio conversion with over 118dB dynamic range A/D and 121dB dynamic range D/A (A-weighted)
- Ultra-low round trip latency to track through plug-ins and record virtual instruments in real time
- 16 line inputs on D-sub, coupled with 16 line outputs and two main monitor outputs
- Two digitally-controlled Red Evolution mic preamps with up to 63dB of ultra-clean gain, stereo linking, individual phantom power, high-pass filter and phase reverse
- Air mode on the preamps, giving recordings the clarity of a transformer-based ISA
- Two Thunderbolt 3 ports as standard to connect additional Thunderbolt products
Focusrite RedNet A16R MkII Rackmount 16×16 Dante Analog Audio Interface
- 16-channel bi-directional analogue interface for Dante networks
- Precision A-D and D-A conversion
- with 119dB dynamic range, flat from 20Hz - 20 kHz (+/- 0.15dB).
- Individual input/output channel level control
- Dual PSUs with locking IEC inlets.
- Dual locking etherCON connectors
- Power supply and ethernet redundancy with auto switchover
Focusrite RedNet AM2 Stereo Dante Headphone Amplifier and Line-Out Interface
- Monitor-quality precision digital conversion for Dante networks
- Power to drive even high impedance headphones at significant levels
- Independent headphone and line out level controls
- Integrated mute switch - instantly kill the signal feeding
- Power over Ethernet (PoE) or via included power supply
- Integrated Gigabit Ethernet switch
- Dual XLR line level outputs
Focusrite RedNet HD32R 32-Channel Dante Networks Pro Tools | HD Bridge
- Allows Dante Ethernet-based audio networking products to interoperate w/ PT|HD & PTls|HDX .
- Ethernet and power supply redundancy
- Provides the vital link to an extensive high-quality audio network on standard Cat 5e or Cat 6
- Cost-effectively increase audio I/O
- Permits multiple workstations to access the same interface hardware and I/O.
- No changes to Pro Tools workflow required
- Up to 32 I/O with Pro Tools|HD over single DigiLink
Focusrite RedNet MP8R 8-Channel Remote-Controlled Mic Pre and A/D for Dante
- Rredundant power supplies and networking
- Ideal for live sound, broadcast, and large installations
- 8 high-quality Focusrite mic preamps
- Remote-controllable from any computer on the RedNet network
- Each preamp channel provides two channels on the network
- Redundant networking via two Neutrik Ethercon locking network connectors
- Redundant power supplies for maximum system reliability in any environment
Focusrite RedNet X2P 2×2 Dante Audio Interface with Red Evolution Mic Pres
- Two of our best preamps provide ultra-clean gain, stereo linking
- individual phantom power, a high-pass filter, phase reverse and Air mode.
- High-quality conversion, with over 118dB dynamic range.
- Power-over-Ethernet allows a single cable to deliver audio, control and power to RedNet X2P.
- Local input mix allows 'more-me' style monitoring for easy foldback control.
- Mic stand mount keeps the unit out of the way and within reach.
- Local control lockout of mic pre settings, output settings or both.