Focusrite ISA ADN2 Two-Channel A-D Card for ISA One
1,995.00 Excl. VAT
- Two-channels of high-quality, precision A/D converter for ISA One
- Up to 24-bit/192kHz sample rate
- Dante connectivity via Primary and Secondary Ethernet ports
- Two-channel XLR connection for AES3 output
- Two-channel RCA connection for S/PDIF output
- Two-channel TOSLINK connector for ADAT output
- Word Clock I/O on BNC connectors
Available on backorder
ISA ADN2
2-Channel A/D Card
With the introduction of the ISA ADN2, the classic ISA mic pre can be implemented directly on a Dante network, providing console-grade preamps to the most advanced of audio networks. ISA ADN2 is an optional two-channel A-D card that provides high-quality analogue-to-digital conversion for the ISA One mic preamp and DI. Featuring Dante, AES3, ADAT and S/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz.
The card offers a familiar set of standard professional connectors with primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIF output. Word Clock I/O on BNC connectors allows synchronisation with many external devices.
Dante outputs on the card provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller. RedNet Control software included.
Two-channel A-D card for ISA One, including Dante connectivity
ISA ADN2 is an optional two-channel A-D card that provides high-quality analogue-to-digital conversion for the ISA One mic preamp and DI. Featuring Dante, AES3, ADAT andS/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz.
The card offers primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIFoutput. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock,or for syncing external equipment to the Dante network.
Dante outputs on the card provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.
And as with all Focusrite Pro products, wherever you happen to be in the world, you can rely on a three-year warranty if any Focusrite Pro hardware needs repairing or replacing due to a manufacturing fault.
Brainworx bx_console
The Focusrite Studio Console reborn in your DAW
| Weight | 9.09 kg |
|---|---|
| Dimensions | 56.13 × 49.78 × 16 cm |
| A/D Resolution: |
24-bit/192kHz |
| Data I/O: |
2 x Ethernet (Dante) |
| Digital Outputs: |
1 x XLR (AES3), 1 x Coax (S/PDIF), 1 x Optical Toslink (ADAT) |
| Clock I/O: |
1 x Word Clock |
| Clock Sources: |
Internal or Word Clock |
| Noise In Presence Of Signal: |
-121dBu 'A'-Weighted (typical) |
| Channel Count: |
2 x Dante channels |
| Output: |
1 x Male XLR |
| 0 DBFS Reference Levels: |
22dBu |
Related products
Focusrite RedNet HD32R 32-Channel Dante Networks Pro Tools | HD Bridge
- Allows Dante Ethernet-based audio networking products to interoperate w/ PT|HD & PTls|HDX .
- Ethernet and power supply redundancy
- Provides the vital link to an extensive high-quality audio network on standard Cat 5e or Cat 6
- Cost-effectively increase audio I/O
- Permits multiple workstations to access the same interface hardware and I/O.
- No changes to Pro Tools workflow required
- Up to 32 I/O with Pro Tools|HD over single DigiLink
Focusrite RedNet PCIeNX Dante PCIe Dante Interface Card
- 128x128 channels (24-bit/192kHz) with ultra-low round-trip latency
- RedNet PCIeNX offers expandable connectivity
- optional upgrade to 256x256 audio channels (24bit/96kHz) with Dante Ready™.
- Dual Ethernet RJ-45 connections
- Supports the latest standards, including AES67 and compliance for SMPTE ST 2110 (DDM required)
- Compatible with Windows or Mac computers (Intel and Apple Silicon supported)
- Easily installed in a PCIe slot or Thunderbolt chassis
Focusrite RedNet X2P 2×2 Dante Audio Interface with Red Evolution Mic Pres
- Two of our best preamps provide ultra-clean gain, stereo linking
- individual phantom power, a high-pass filter, phase reverse and Air mode.
- High-quality conversion, with over 118dB dynamic range.
- Power-over-Ethernet allows a single cable to deliver audio, control and power to RedNet X2P.
- Local input mix allows 'more-me' style monitoring for easy foldback control.
- Mic stand mount keeps the unit out of the way and within reach.
- Local control lockout of mic pre settings, output settings or both.