Marshall 1974X Re-issue of 18W / 1×12 Handwired Combo
8,430.00 Excl. VAT
- Hand-soldered re-creation of a mid-’60s Marshall 1974 tube combo
- Delivers 18W of tube-fueled power via dual cathode-biased EL84s
- Preamp section is loaded with 3 ECC83 tubes; includes an EZ81 rectifier tube
- 2-channel, non-master-volume design with per-channel Tone and Volume controls
- Tube-driven, footswitchable tremolo with dedicated Speed and Intensity knobs
- Boasts near-perfect duplicates of the original amplifier’s off-the-shelf transformers
- Celestion G12M-20 Greenback has been “aged” for true-to-life vintage tone
Available on backorder
Description
Delivers vintage tones
Unlock the legendary power of Marshall’s iconic sound with the 1974X Handwired Combo. Immerse yourself in the unmistakable tones that have shaped the landscape of rock music for decades.
Classic Tremolo effect
Classics are classics for a reason. The 1974X Handwired Combo incorporates an analogue tremolo circuit. Despite the advantages of digital effects in certain applications, many guitar players still favour the analogue tremolo for its vintage sound, providing a timeless appeal.
Celestion G12M-20 Greenback
The G12M Greenback speaker has undergone some changes over time, but it has always managed to keep its highly sought-after sound. The 20W version of this speaker has a bold mid-range and tight high-end, giving it aggressive tonesfor chords and searing leads. It’s perfect for bringing drive and clarity to modern high gain amps.
You may also like…
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall 2203-01 – 100W Valve Head – JCM800
- Possibly the most iconic and most-played guitar amplifier since the late '70s
- 1-channel operation with 3-band EQ, a simple design that makes it easy to dial in great tones
- Incredibly powerful at 100W, not an amp that's made to be played quietly
- Series FX loop lets you switch pedals in and out, with true bypass operation for sonic transparency
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Related products
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall CODE25 – 25W MST Guitar Combo
- 25 watts with a 10" speaker - good for small gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for tight a 1 x 12" to a beefy 4 x 12"
- 24 digital FX to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall JVM205H – 50 Watt All Valve 2 Channel Head
- 50-watt all-tube amp head
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has three footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Marshall JVM215C – 50 Watt All Valve 1×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speakers
Marshall JVM410C – 100 Watt All Valve 2×12″ 4 Channel Combo
- 100-watt 2 x 12" Combo
- Marshall G-12 Vintage and Celestion 12" speakers
- 5 x ECC83 (12AX7s) and 4 x EL34s
- 4 independent channels
- 3 footswitchable modes
- Studio quality digital reverb
- 2 footswitchable master volumes
- 2 FX loops - series/parallel
- Emulated line-out
- 6-way footswitch with memory
- Channel switching via MIDI
Marshall JVMC212 – 140W 2×12″ Extension Cabinet
- The perfect extension cab for your Marshall JVM combo
- Robust housing with optimum resonance
- Sturdy birch plywood construction; half-open back
- 12" Celestion Vintage 30 speakers and 12" Celestion Heritage speakers (both 8 ohms)
- 140-watt capacity
- Identical to the TSLC212 Cabinet from the JCM2000 series