Marshall DSL1CR – 1W 1×8 Valve Combo with Reverb
1,170.00 Excl. VAT
- 2-ch combo amp capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series effects loop accepts your favorite stompboxes and effects with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- 8-in. Celestion Eight 15 speaker delivers punchy, wide-ranging tone
- Record-ready line output utilizes Softube’s accurate sound emulation of a Marshall 1960 cab
Available on backorder
Description
Power reduction from 1W to 0.1W at the flick of a switch
The DSL1 Combo is engineered to deliver a great sound at every level, so you can pick the power setting that’s right for you. Opt for either 1W or a more subdued 0.1W power output with a simple flick of a switch. Ideal for seamlessly transitioning between the studio and the privacy of your bedroom. No matter what room you enter you’ll be sure to turn heads.
Celestion G8C-15"Eight-15"
The Celestion G8C-15″Eight-15″ speaker offers authentic British tone and well-balanced sound, providing strong mids, highs and powerful bass. Using this speaker inside the DSL1 Combo adds extra depth and punch to your tone. It’s time to let the world hear the difference.
Two gain channels
If you really believe that two is better than one, the DSL1 Combo is perfect for you. It features two gain channels, ultra gain and classic gain, that can be effortlessly controlled via footswitch. Dive into sonic experimentation by seamlessly going from ultra-clean tones to heavy distortion and exploring all the nuances in between.
Compact and portable
Make the world your stage. This conveniently sized amplifier lets you put on a show in both home settings and on-the-go scenarios such as band practices. Its compact design makes it a great amp for here, there and everywhere.
Additional information
| Weight | 10.5 kg |
|---|---|
| Dimensions | 45.4 × 30.8 × 44.6 cm |
| Type: | Tube |
| Number of Channels: | 2 |
| Speaker Size: | 1 x 8″ Celestion Eight 15 speaker |
| Preamp Tubes: | 2 x 12AX7 |
| Power Tubes: | 1 x 12AU7 |
| Reverb: | Yes |
| EQ: | 3-band EQ, Tone Shift |
| Inputs: | 1 x 1/4″ (instrument), 1 x 1/8″ (aux in) |
| Outputs: | 1 x 1/8″ (softube emulated out), 1 x 1/4″ (internal speaker) |
| Effects Loop: | Yes |
| Footswitch I/O: | 1 x 1/4″ (channel) |
| Footswitch Included: | Yes |
| Bias Type: | Cathode Biased |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall DSL20CR – 20W 1×12 Combo with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- High and low power modes allow you to dial in appropriate volume for any setting
- Line output with Softube's accurate emulation of a Marshall 1960 cab
- Highly effective Resonance control replaces the original's fixed deep switch
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Rear-panel series effects loop
- Included 2-way footswitch for channel switching and FX loop on/off
Marshall DSL20HR – 20W Valve Head with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- High and low power modes allow you to dial in the appropriate volume for any setting
- Line output with Softube's accurate emulation of a Marshall 1960 cab
- Highly effective Resonance control lets you dial in your preferred amount of low-end girth
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Rear-panel series effects loop
- Included 2-way footswitch for channel switching and FX loop on/off
Marshall DSL40CR – 40W 1×12 Combo with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- Each channel features 2 modes — Clean/Crunch and OD1/OD2, respectively
- High and low power modes allow you to dial in appropriate volume for any setting
- Line output with Softube cabinet emulation faithfully re-creates the sound of a Marshall 1960 Lead cabinet
- Highly effective Resonance control tailors your low-end response
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Bypassable rear-panel series effects loop
- Included 2-way footswitch for channel switching and reverb on/off
Marshall DSL5CR – 5W Valve 1×10 Combo with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- High and low power modes allow you to dial in appropriate volume for any setting
- Line output with Softube's accurate emulation of a Marshall 1960 cab
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Rear-panel series effects loop
Related products
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1960TV – 4×12″ 100W Original Tall Vintage Cabinet
- Extra-tall cabinet
- 25-watt Celestion Greenback speakers
- Grey EC grille cloth and gold piping
- Small size white logo with gold foil
- Black levant vinyl/gold beading on cabinet
- Finger-locked joints on all 4 corners of the cabinet's frame to ensure a tight fit between sides, make the cabinet less susceptible to damage, and allow the entire cabinet to resonate sympathetically with the sound from the speakers
- Castors are standard and can be removed if desired
- 100 watts at 16 ohms
Marshall 1974CX – 1×12″ Extension Cabinet for 1974X
- 20W, open-back, 1 x 12-inch speaker cabinet
- Exquisitely handwired with old-school construction methods
- Built with reproduced components for maximum authenticity
- Celestion G12M-20 Greenback speaker has been "aged" for true-to-life vintage tone
- 15Ω mono operation
- Robust birch construction with finger-locked joints
- Boasts an eye-grabbing, Bluesbreaker-inspired look
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall CODE25 – 25W MST Guitar Combo
- 25 watts with a 10" speaker - good for small gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for tight a 1 x 12" to a beefy 4 x 12"
- 24 digital FX to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall JVM410C – 100 Watt All Valve 2×12″ 4 Channel Combo
- 100-watt 2 x 12" Combo
- Marshall G-12 Vintage and Celestion 12" speakers
- 5 x ECC83 (12AX7s) and 4 x EL34s
- 4 independent channels
- 3 footswitchable modes
- Studio quality digital reverb
- 2 footswitchable master volumes
- 2 FX loops - series/parallel
- Emulated line-out
- 6-way footswitch with memory
- Channel switching via MIDI