Marshall ORI20H – 20W All Valve Amp Head
2,086.00 Excl. VAT
- Packed with 3 ECC83 preamp tubes and 2 EL34 power tubes
- Separate Gain and Master controls for dialing in the right amount of crunch
- Presence knob and 3-band EQ for shaping your tone
- Unique Tilt control blends bright and normal sounds
- Switchable Low/Mid/High power enables high-output sounds at any volume
- Built-in FX loop makes integrating your pedalboard easy
- Footswitchable gain boost for adding extra punch to your solos
Available on backorder
Description
HIGH, MID AND LOW POWER WITH POWERSTEM, POWER REDUCTION TECHNOLOGY
Powerstem, power reduction technology, allows you to have high or low power modes without compromising on sound quality.
Powerstem works by reducing the voltage rails around the power amplifier rather than using our traditional pentode/triode reduction methods. This offers power reduction without changing the sonic character, providing optimum tone and performance regardless of the volume level required by guitarists.
Tilt control to blend your sound
Using the tilt control, you can change the blend of your sound from normal to high treble. This is based on the multi-input technology of our more classic amps such as the 1959SLP and JTM45 but in a single controlled knob.
2-way footswitch allows you to control the gain boost
The gain boost feature, controlled via footswitch, provides you with a versatile tool for refining your sound. Allowing you to incorporate an additional level of gain, you can infuse your tone with a distinctive crunch. This dynamic capability empowers you to shape and evolve your sonic expression, providing a seamless path to introducing heightened intensity and character to your playing.
FX loop
Retaining your sound’s clarity and authenticity is crucial to any guitar player. That’s why the Origin20 Head features an FX loop that acts as a junction for pedals. Every time you play, it’ll sound like you and no one else.
Additional information
| Weight | 13.62 kg |
|---|---|
| Dimensions | 62.2 × 32.8 × 36.4 cm |
| Type: | Tube |
| Number of Channels: | 1 |
| Output Power: | 20W (3W/0.5W power settings) |
| Preamp Tubes: | 3 x ECC83 |
| Power Tubes: | 2 x EL34 |
| EQ: | 3-band EQ, Tilt control |
| Inputs: | 1 x 1/4″ |
| Outputs: | 1 x 1/4″ (16 ohm), 2 x 1/4″ (2 x 16 ohm / single 8 ohm), 1 x 1/4″ (DI out) |
| Effects Loop: | Yes |
| Footswitch I/O: | 1 x 1/4″ (gain boost, effects loop) |
| Footswitch Included: | Yes, 2-button footswitch |
| Bias Type: | Cathode Biased |
| Construction Material: | Black Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall ORI50H – 50W All Valve Amp Head
- Packed with 3 ECC83 preamp tubes and 2 EL34 power tubes
- Separate Gain and Master controls for dialing in the right amount of crunch
- Presence knob and 3-band EQ for shaping your tone
- Unique Tilt control blends bright and normal sounds
- Switchable 5W/10W/50W power enables high-output sounds at any volume
- Built-in FX loop makes integrating your pedalboard easy
- Footswitchable gain boost for adding extra punch to your solos
Marshall SN20C – 20W Valve Amp Head
- 2-channel, 20W tube combo amplifier inspired by the JCM900 — a high-octane hybrid amp that fueled countless rock and metal acts in the 1990s
- Dual 5881 power tubes, a pair of ECC83 preamp tubes, and an ECC83 phase splitter pair with clipping diodes to merge all the warmth of tube saturation with the clarity and reliability of solid state
- Treble, Middle, Bass, and Presence knobs to dial in your sound to perfection
- Speaker-emulated DI output for easy recording and straight-to-PA gigging
- FX loop makes it a breeze to integrate your favorite time-based and modulation pedals
- Spring reverb circuit rounds out your sound with depth, space, and character
- 5W/1W power scaling for cranked tube tones at home- and recording-appropriate volume levels
- Classic aesthetics that are sure to thrill fans of the original JCM900
- Proudly made in Marshall’s UK factory in Bletchley, England
Marshall SV20H – 20W Valve amp head – JMP 1959 SLP
- Packs the legendary tone of a 1959 Super Lead into a 20W head
- Conjures up saturated blues grit and biting leads — the coveted Plexi sound
- 4 separate inputs for you to blend your sound, along with high- and low-sensitivity loudness knobs
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5W
- DI output for easy recording or routing to a PA
Related products
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1974CX – 1×12″ Extension Cabinet for 1974X
- 20W, open-back, 1 x 12-inch speaker cabinet
- Exquisitely handwired with old-school construction methods
- Built with reproduced components for maximum authenticity
- Celestion G12M-20 Greenback speaker has been "aged" for true-to-life vintage tone
- 15Ω mono operation
- Robust birch construction with finger-locked joints
- Boasts an eye-grabbing, Bluesbreaker-inspired look
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall CODE25 – 25W MST Guitar Combo
- 25 watts with a 10" speaker - good for small gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for tight a 1 x 12" to a beefy 4 x 12"
- 24 digital FX to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall JTM45 2245 – 30W Valve Head
- Accurate reissue of the legendary JTM45 amplifier, a '60s rock legend
- 30 watts of power, perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Sounds great with gain boost pedal in front of it
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall PEDL-90011 – 1 Way Latching Pedal – Channel change
- Simple, no-frills pedal with a single latching switch for channel selection.
- A bright, built-in LED indicates which channel is active
- Designed to work exclusively with the Marshall DSL1H and DSL1C from the 2018 DSL1 series.
- Built with a "road-ready metal" casing
- Pedal does not require a battery or an external power source.
- Draws power for the LED directly from the amplifier via the attached cable.
- It features a fixed, hard-wired cable with a 1/4-inch jack