Marshall 1936 – 150W 2×12″ Mono / 75W + 75W Stereo Cabinet
2,746.00 Excl. VAT
- 150-watt, 2 x 12″ base cabinet
- Celestion G12T-75W speaker
- Selectable mono (8 ohms) or stereo (16 ohms) operation
- Black grille cloth and white piping
- Large white logo
- Black elephant grain vinyl
Available on backorder
Marshall Cabinet Sound Meets 2x12 Convenience!
Looking for big Marshall tone in a smaller-sized cabinet? The Marshall 1936 is a smaller mono/stereo 2 x 12″ cabinet with huge sound. The compact 150-watt Marshall 1936 is the perfect extension cabinet for combos and amp heads. Smooth ABS plastic corners offer excellent protection for your cab’s corners, and Marshall’s highest quality woodwork includes finger-jointed plywood construction. Want a portable half-stack? The Marshall 1936 guitar speaker cabinet is the solution.
The perfect addition to your amp
The Marshall 1936 guitar cab is a wonderful addition to your rig when all you need is another pair of 12" speakers! While fully able to handle a full-sized head, the Marshall 1936 can also be used to extend the sound of a Marshall combo amp. Due to its size and mobility, it's seen in clubs, practice halls, and mid-sized tours everywhere. When you need that Marshall sound but don't need a 4 x 12" cab, the Marshall 1936 guitar speaker cabinet is perfect!
Sonically Superior
Marshall is the only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4 x 12" (and, in this case, 2 x 12") cabs are indeed rock 'n' roll history in a stack!
Rugged and ready for the road
Roadworthiness is a vital prerequisite in the world of relentless touring. As Marshall's 40 years of cabinet building attest, Marshall cabinets are definitely built to stand the test of time! Their highly skilled craftsmen construct these cabinets from the finest materials available - finger-jointed plywood, cotton-backed PVC covering, heavy-duty hardware, and the highest quality fittings.
| Weight | 26.64 kg |
|---|---|
| Dimensions | 80.4 × 35.4 × 64.2 cm |
| Configuration: | 2 x 12″ |
| Powered: | No |
| Speakers: | Celestion G12T-75 |
| Power Handling: | 150W |
| Impedance: | 8 ohms (Mono), 16 ohms (Stereo) |
| Mono/Stereo: | Mono, Stereo |
| Cabinet Type: | Straight |
| Open/Closed Back: | Closed |
| Inputs: | 2 x 1/4″ |
| Construction Material: | Finger-jointed Plywood |
You may also like…
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Related products
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall CODE50 – 50W MST Guitar Combo
- 50 watts with a 12-inch speaker — good for club gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for a tight 1 x 12-inch to a beefy 4 x 12-inch
- 24 digital effects to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall JVM210C – 100 Watt All Valve 2×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speaker
Marshall JVMC212 – 140W 2×12″ Extension Cabinet
- The perfect extension cab for your Marshall JVM combo
- Robust housing with optimum resonance
- Sturdy birch plywood construction; half-open back
- 12" Celestion Vintage 30 speakers and 12" Celestion Heritage speakers (both 8 ohms)
- 140-watt capacity
- Identical to the TSLC212 Cabinet from the JCM2000 series
Marshall PEDL-90011 – 1 Way Latching Pedal – Channel change
- Simple, no-frills pedal with a single latching switch for channel selection.
- A bright, built-in LED indicates which channel is active
- Designed to work exclusively with the Marshall DSL1H and DSL1C from the 2018 DSL1 series.
- Built with a "road-ready metal" casing
- Pedal does not require a battery or an external power source.
- Draws power for the LED directly from the amplifier via the attached cable.
- It features a fixed, hard-wired cable with a 1/4-inch jack
Marshall SC20H – 20W Valve amp head Studio Classic – JCM 800 2203
- Packs the incendiary tone of a JCM800 2203 into a 20-watt head
- Conjures up everything from rich and full cleans to high-gain mayhem
- Separate Preamp Volume and Master Volume controls allow for high-gain tones at low volumes
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5 watts
- DI output for easy recording or routing to a PA