Focusrite RedNet D16R MkII Rackmount 16×16 Dante Digital Audio Interface

AED 10,495.000 Excl. VAT

  • 16-channel bi-directional digital interface for Dante networks.
  • Individual input and output channel level control
  • Dual PSUs with locking IEC inlets.
  • Dual locking etherCON connectors
  • Power supply and ethernet redundancy
  • Front-panel LED indicators for PSU
  • Sample rate conversion on all input channels.

In stock

SKU: MONF0018EU Categories: ,
Description

RedNet D16R MkII

16-channel AES3-RedNet Bridge, with Redundant Power Supplies and Redundant Network Connections

RedNet D16R MkII is a 16-channel bi-directional digital interface for Dante networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet D16R MK2 features power supply and Ethernet redundancy with auto switchover in case of failure.

Various connection options make RedNet D16R MK2 a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S/PDIF connections, respectively, to be made. Sample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.

 

16×16 AES3 I/O with independent level control

The RedNet D16R MkII is a 16-channel bi-directional AES3 interface for Dante® networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet D16R MkII features power supply and Ethernet redundancy with auto switchover in case of failure.

Various connection options make RedNet D16R MkII a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S/PDIF connections, respectively, to be made.

Sample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.

 

 

Additional information
Weight 6.34 kg
Dimensions 60.45 × 43.69 × 11.18 cm
A/D Resolution:

Up to 24-bit/192kHz

Data I/O:

2 x Ethernet (Dante)

Digital Inputs:

1 x Coax (S/PDIF), 1 x DB-25 (AES3), 1 x XLR (AES3)

Digital Outputs:

1 x Coax (S/PDIF), 1 x DB-25 (AES3), 1 x XLR (AES3)

Network:

Dante, RedNet

OS Requirements

Mac: OS X 10.9.5 or later PC: Windows 7 SP1 or later

Power Supply:

2 x Standard IEC AC cables

Rack Spaces:

1U

Software:

RedNet Control

Clock I/O:

2 x BNC (1 x word clock)