Focusrite RedNet A16R MkII Rackmount 16×16 Dante Analog Audio Interface
15,995.00 Excl. VAT
- 16-channel bi-directional analogue interface for Dante networks
- Precision A-D and D-A conversion
- with 119dB dynamic range, flat from 20Hz – 20 kHz (+/- 0.15dB).
- Individual input/output channel level control
- Dual PSUs with locking IEC inlets.
- Dual locking etherCON connectors
- Power supply and ethernet redundancy with auto switchover
In stock
RedNet A16R MkII
16-in/16-out Dante Network Interface with Network and Power Supply Redundancy
RedNet A16R MKII is a 16-channel analogue Interface for Dante networks, with two channels of AES3 I/O. Individual input and output channel level controls allow for precise adjustment of all I/O levels using RedNet Control. With two power supplies and primary and secondary etherCON network connectors, RedNet A16R MKII is perfect for critical-path applications in recording, post-production, live sound and broadcast. Built-in redundancy features allow for silent fail-over in the event of power or network outage, providing reassurance for system technicians.
Analogue inputs and outputs are connected through four rear-panel AES59-configured DB25 connectors, while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. The XLR input can accept DARS signals in addition to AES3. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A16R MKII, or alternatively allows RedNet A16R MKII to act as a network clock grand master, synchronised to external input. RedNet A16R MKII is well suited to permanent installation and repeated strike and setup: all connectors lock and remain terminated even under stress, providing worry-free installation and peace of mind once situated in a rack. In addition, all Focusrite products come with a three-year warranty and award-winning customer support.
16×16 AES3 I/O with independent level control
The RedNet A16R MkII is a 16-channel bi-directional AES3 interface for Dante® networks. The 1U rackmount device features individual input and output channel level controls, allowing for precise calibration and control of all input and output levels using RedNet Control. RedNet A16R MkII features power supply and Ethernet redundancy with auto switchover in case of failure.
Various connection options make RedNet A16R MkII a flexible addition to any Audio-over-IP system. A pair of DB25 multipin connectors each connect eight channels of AES3 I/O into and out of the interface, while XLR and RCA ports enable two-channel AES3 and S/PDIF connections, respectively, to be made.
Sample rate conversion on every input enables external equipment to operate at different sample rates, and DARS signals are accepted on the XLR connector. Word Clock I/O on BNC connectors allows synchronisation to house clock, or syncing external equipment to the Dante network.
Brainworx bx_console
The Focusrite Studio Console reborn in your DAW
| Weight | 6.34 kg |
|---|---|
| Dimensions | 60.45 × 43.69 × 11.18 cm |
| A/D Resolution: |
Up to 24-bit/192kHz |
| Analog Inputs: |
2 x DB-25 |
| Data I/O: |
2 x Ethernet (Dante) |
| Digital Inputs: |
1 x XLR (AES3) |
| Digital Outputs: |
1 x XLR (AES3) |
| Network: |
Dante, RedNet |
| OS Requirements |
Mac: OS X 10.9.5 or later PC: Windows 7 SP1 or later |
| Power Supply: |
2 x Standard IEC AC cables |
| Rack Spaces: |
1U |
| Software: |
RedNet Control |
| Clock I/O: |
2 x BNC (1 x word clock) |
Related products
Focusrite ISA ADN8 8-Channel A-D Card for ISA 428/828 MkII
- Eight-channels of high-quality, precision A/D converter for ISA 428 MK2 and ISA 828 MK2
- Up to 24-bit/192kHz sample rate
- Dante connectivity via Primary and Secondary Ethernet ports
- Industry standard eight-channel AES59 DB25 output connection for AES3
- Two TOSLINK connectors for ADAT
- Word Clock I/O on BNC connectors
- RedNet Control and Dante Controller software allow Dante routing and control
Focusrite RedNet D64R 64-Channel MADI-Dante Bridge
- Connects a MADI system and a Dante network seamlessly together.
- Connect Dante to digital mixing consoles, interfaces and cards that use MADI
- Built-in redundancy
- Supports both coax and optical interfaces
- Slave either the Dante system or MADI streams to an external clock.
- Supports up to 64 channels of digital audio I/O
- Sample rate conversion (SRC) on each input and output
Focusrite RedNet HD32R 32-Channel Dante Networks Pro Tools | HD Bridge
- Allows Dante Ethernet-based audio networking products to interoperate w/ PT|HD & PTls|HDX .
- Ethernet and power supply redundancy
- Provides the vital link to an extensive high-quality audio network on standard Cat 5e or Cat 6
- Cost-effectively increase audio I/O
- Permits multiple workstations to access the same interface hardware and I/O.
- No changes to Pro Tools workflow required
- Up to 32 I/O with Pro Tools|HD over single DigiLink
Focusrite RedNet MP8R 8-Channel Remote-Controlled Mic Pre and A/D for Dante
- Rredundant power supplies and networking
- Ideal for live sound, broadcast, and large installations
- 8 high-quality Focusrite mic preamps
- Remote-controllable from any computer on the RedNet network
- Each preamp channel provides two channels on the network
- Redundant networking via two Neutrik Ethercon locking network connectors
- Redundant power supplies for maximum system reliability in any environment
Focusrite RedNet PCIeNX Dante PCIe Dante Interface Card
- 128x128 channels (24-bit/192kHz) with ultra-low round-trip latency
- RedNet PCIeNX offers expandable connectivity
- optional upgrade to 256x256 audio channels (24bit/96kHz) with Dante Ready™.
- Dual Ethernet RJ-45 connections
- Supports the latest standards, including AES67 and compliance for SMPTE ST 2110 (DDM required)
- Compatible with Windows or Mac computers (Intel and Apple Silicon supported)
- Easily installed in a PCIe slot or Thunderbolt chassis
Focusrite RedNet X2P 2×2 Dante Audio Interface with Red Evolution Mic Pres
- Two of our best preamps provide ultra-clean gain, stereo linking
- individual phantom power, a high-pass filter, phase reverse and Air mode.
- High-quality conversion, with over 118dB dynamic range.
- Power-over-Ethernet allows a single cable to deliver audio, control and power to RedNet X2P.
- Local input mix allows 'more-me' style monitoring for easy foldback control.
- Mic stand mount keeps the unit out of the way and within reach.
- Local control lockout of mic pre settings, output settings or both.