Warm Audio Warm Lifter Inline Active Microphone Preamp
AED 554.000 Excl. VAT
- Inline active microphone preamp with 26dB Of true analog gain
- Ultra-low noise JFET input, balanced I/O signals
- Operates on +48V phantom power
- Selectable highpass filter (100Hz) and selectable high-shelf boost (3kHz)
- Input impedance at 2.4k Ohm
- Rugged, top-quality construction
- Built and inspected in Austin, Texas
Available on backorder
Warm Lifter
Inline Active Microphone Preamp
Delivering Clean Gain to Low-Output Ribbon & Dynamic Mics with Added Tone-Shaping Features
The Perfect Partner For Low-Output Mics In Studio & On Stage
The Warm Lifter is an inline active microphone preamp designed to provide powerful gain to low output dynamic and ribbon mics and comes with premium features for live & studio use. Warm Lifter puts a balanced, 2.4k Ohm high-impedance mic pre with analog gain, tone filtering, and balanced JFET input at your fingertips at an incredible size and price.
Built To Handle Anything Audio
Having 26dB on tap before hitting digital prevents a mixer or digital interface from being taxed beyond 40dB of onboard digital gain where the likelihood of artifacts and thinning of sound increases. Additionally, the Warm Lifter ensures you have extra headroom necessary to bring out the rich lower-midrange detail and presence that passive ribbons and many dynamic mics are known for, without adding digital gain artifacts or losing tone from aggressively long cable runs. Beyond gain, Warm Lifter also has a 100Hz high-pass filter and a 3kHz high-shelf boost to sculpt tones.
The Warm Lifter JFET input impedance is 2.4k Ohm, and will consistently act as a matchmaker between low output microphones and interfaces/mixers to solve common impedance mismatch problems like signal loss, altered frequency response, and phase issues.
The selectable 100 Hz high-pass filter removes unruly low end frequencies for added clarity and detail. Great for reducing the proximity effect present on vintage ribbons and dynamics.
The selectable 3 kHz high-shelf boost to emphasize the upper-mids and highs for clarity and detail boosted on darker mics. Great for adding clarity and top-end to vintage ribbons and dynamics.
Every single Warm Lifter is meticulously hand tested & inspected at Warm HQ in Austin,TX by real musicians and engineers with passion for superior sound.
| Weight | 0.45 kg |
|---|---|
| Dimensions | 12.95 × 11.68 × 6.35 cm |
| In-Line Accessory Type: |
Preamplifier |
| Transformer Type: |
Impedance Matching |
| Analog Inputs: |
1 x XLR |
| Analog Outputs: |
1 x XLR |
| Number of Channels: |
1 |
| Gain: |
+26 dB |
| High-Pass Filter: |
100 Hz |
| Circuit Type: |
JFET |
| Controls: |
Low Cut/HPF |
| Frequency Response: |
10 Hz to 100 kHz ±0.2 dB |
| Impedance: |
Input: 2.4 Kilohms (Balanced) |
| Max Input Level: |
-11 dBu |
| Max Output Level: |
15 dBu |
| Noise: |
Output Noise: -93.97 dBm |
| THD+N: |
0.001% (at 15 dBu) |
Related products
Warm Audio WA-19 Dynamic Microphone – Black
- Dynamic Microphone with Cardioid Polar Pattern
- 30Hz – 18Khz Frequency Response
- Exemplary clone of the 1960s’ most famous mics — most associated with The Beatles
- Fantastic choice for drum overheads, bottom snare, acoustic guitar, voice, guitar cabs, and much more
- Variable highpass filter @50Hz with 0 to -10dB range
- Ventilated slots on the body reduce proximity effect and enable you to close-mic louder sources
- 145dB Max SPL
Warm Audio WA-19 Dynamic Microphone – Nickel
- Dynamic Microphone with Cardioid Polar Pattern
- 30Hz - 18Khz Frequency Response
- Exemplary clone of the 1960s’ most famous mics — most associated with The Beatles
- Fantastic choice for drum overheads, bottom snare, acoustic guitar, voice, guitar cabs, and much more
- Variable highpass filter @50Hz with 0 to -10dB range
- Ventilated slots on the body reduce proximity effect and enable you to close-mic louder sources
- 145dB Max SPL
Warm Audio WA-44 Ribbon Microphone
- Ribbon Microphone with 2.5-micron Ribbon
- Figure-8 Polar Pattern
- 20Hz-20kHz Frequency Response, and 140dB Max SPL
- Faithful re-creation of the most iconic broadcast ribbon mic of all-time
- Made from top-quality premium components
- Includes a Star-Quad shielded Gotham XLR cable and embroidered case
- Rolled-off top end tames harshness for a smooth, natural sound
Warm Audio WA-47 Large-Diaphragm Tube Condenser Microphone
- Large-Diaphragm Tube Condenser Microphone with 9 Polar Patterns
- External PSU, Shockmount, and Wood Presentation Box
- Custom reproduction '47-style k47 capsule
- TAB-Funkenwerk (AMI) USA output transformer
- JJ Slovak 5751 vacuum tube
- Wima and Solen French polystyrene capacitors
- Includes wood presentation box, shockmount, and IEC power cable
Warm Audio WA-67 Large-Diaphragm Tube Condenser Microphone
- Large-Diaphragm Tube Condenser Microphone
- Nickel-Plated Brass Microphone Body And Headbasket
- Premium 7-Pin Tube Cable From Gotham Switzerland
- Polar Patterns: Cardioid, Omni, Figure-8
- Switchable High Pass Filter & 10dB Pad
- Package Includes: Wood Display Box,
- with Shockmount, Hardmount, Power Supply, 7-Pin Mic Cable
Warm Audio WA12 MKII Single-Channel Preamplifier – Black
- 1-channel Mic/Instrument Preamp with 71dB of Gain
- Fully discrete design with a robust 71dB of gain to power all your mics
- High-voltage X731 operational amplifier, based on the classic Melcor 1731
- Tone button gives you tonal versatility
- 48-volt phantom power, 20dB pad, and polarity invert switches
- Mic level balanced input: XLR or 1/4″ TRS
- Balanced outputs: XLR and 1/4″ TRS
Warm Audio WA87 R2 Large-diaphragm Condenser Microphone – Nickel
- Large-Diaphragm FET Condenser Microphone
- Switchable 10 dB Pad & 80 Hz High Pass Filter
- Three Polar Patterns: Cardioid, Figure-Of-Eight, And Omnidirectional
- Included Accessories: Wooden Storage Case, Hard Mount, & Shock Mount
- Color: Available In Nickel Or Black Finish
- 24k gold-plated, 3 pin XLR (150 ohms)
- SPL (.5% THD): 132dB (pad engaged), 125dB (pad disengaged)