sE Electronics Voodoo VR2 Active Ribbon Microphone
AED 2,295.000 Excl. VAT
- Active Ribbon Microphone with 20Hz-18kHz FR
- Superbly detailed, open and natural sound
- Full frequency response using technology
- Hand-tensioned ribbon constructed by our highly specialized technicians
- All-metal housing and gold plated XLR connector
- A secret weapon for top musicians and engineers worldwide
Available on backorder
Description
VR2
The VR2 marks a new era for ribbon mic technology
An active ribbon that can take violins and voices right to the foreground of your listener’s stereo.
Inside the VR2
A NEW ERA FOR RIBBON MIC TECHNOLOGY
Until the VR Series, the only ribbon mic in the world to perform across 20Hz-20kHz was our own Rupert Neve collaboration, the RNR1. This was achieved using state-of-the-art custom transformers and a Rupert Neve-designed circuit to reveal HF usually absent.
AN ACTIVE RIBBON WITH FULL FREQUENCY RESPONSE
With the VR mics, full frequency response is achieved using a clever mechanical device designed by Siwei Zou, the company CEO, and a hand-tensioned ribbon constructed by our highly specialized technicians in sE’s capsule room.
ALL-METAL HOUSING & PREMIUM FINISH
Unlike the cheaply constructed bodies of some other affordable microphones, the VR2’s all-metal housing provides efficient rejection of any electrical interference and noise – and the high-quality finish ensures a great look for years to come.
GOLD-PLATED XLR CONNECTOR
Ensures loss-free, reliable signal connection for years and years of demanding use on stage or in studio settings.
Additional information
| Weight | 1.18 kg |
|---|---|
| Dimensions | 41.66 × 12.95 × 9.40 cm |
| Color: |
Black |
| Connector: |
XLR |
| Frequency Range: |
20Hz-18kHz |
| Included Accessories: |
48V phantom power |
| Max SPL: |
135dB SPL |
| Output Impedance: |
200 ohms |
| Polar Pattern: |
Figure-8 |
| Ribbon Type: |
2-micron Aluminum |
| Self Noise: |
18dB (A weighted) |
| Microphone Type |
Active Ribbon |
Related products
sE Electronics DM1 Dynamite Active In-Line Microphone Preamplifier – Red
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 28dB of Gain
- Adds +28dB of clean gain to low-output passive microphones for proper gain staging
- Class A electronics offer a neutral sound
- Output buffer ensures the unit provides consistent gain regardless of load
- Low output impedance ensures you get a clean signal regardless of cable length
- Gold-plated connectors offer a loss-free and reliable connection
- Rugged metal housing stands up to punishment
sE Electronics guitaRF Reflexion Filter with Stand
- Portable Iso Booth Designed Specifically for Miking Guitar Cabinets
- A Reflexion Filter for your guitar cab to provide isolation on loud stages
- Used in venues to help control instrument bleed
- A friendly studio companion that provides additional isolation
- A dual mic mount ensures a safer on-stage experience
- Thanks to its dual mic mount, experience immediate phase alignment
- Minimal stage bleed and coloration allows the ideal filtration
sE Electronics RNT Rupert Neve Signature Series Multi-Pattern Tube Condenser Microphone
- Large-diaphragm Tube Condenser Microphone with 9 Polar Patterns
- Fully discrete, Class-A electronics in both active stages
- The finest true condenser capsule we've ever built
- The same custom op-amps used in Rupert Neve Designs' flagship 5088 console
- Switchable gain and a massive dynamic range
- 9-position polar pattern switch for precise balance between direct and ambient sound
sE Electronics SE-T1-U Large-diaphragm Condenser Microphone
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- The cardioid-only version of the renowned T2
- The very same hand-crafted twin 1“ titanium-sputtered brass capsule as the T2
- Titanium-sputtered true condenser cardioid capsule
- Accurate definition and fast transient response
- Built roadworthy with all-metal housing
- Innovative close-miking shockmount
- 80 / 160 Hz low-cut filters and -10 / -20 dB pads
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone – Matched Pair
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics X1 A Large-diaphragm Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone
- with -20dB Pad and 100Hz Highpass Filter - Black
- Newly-developed condenser capsule with the same rugged metal chassis of the X1 SERIES
- First-class sound & specifications at an even better "home studio" cost
- Extremely natural frequency response, massive SPL-handling capabilities (150dB!)
- Switchable attenuation and low-cut filters, with a perfectly balanced sensitivity level
- 100 Hz bass-cut filter and -20 dB attenuation pad
sE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone
- with -10dB/-20dB Pad and Low-cut Filters
- Custom-designed hand-crafted true condenser capsule individually tuned
- A refined version of sE's best-selling X1
- Improved sensitivity, dramatically increased SPL handling (up to 160dB!)
- Hand-made metal housing and gold-sputtered diaphragms
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads