sE Electronics V2 Switch Supercardioid Dynamic Handheld Microphone
AED 195.000 Excl. VAT
- Supercardioid Dynamic Handheld Microphone with On/Off Switch
- Integrated No-Slip On / Off Switch
- Stainless Spring Steel Mesh Grille & Beveled Edge
- Integrated Windscreen & Shockmount
- All-Metal Housing & Gold-Plated XLR Connector
- Now available: the V2 SWITCH XLR with a 15 ft. / 5 m XLR-to-XLR Cable
- Also available, the V2 Switch QTR with a 15 ft. / 5 m XLR to 1/4 inch TS Cable
Available on backorder
V2 SWITCH
V2 Switch – V2 Switch XLR – V2 Switch QTR
The V2 SWITCH is a multi-purpose handheld dynamic microphone with a no-slip on/off switch. Its balanced sound character is ideal for vocals, speech, and a wide range of instruments. Also available as bundles, with a XLR to XLR or XLR to 1/4 inch TS cable.
Inside the V2 SWITCH
Tailored Supercardioid Capsule Design
The V2 SWITCH isolates your voice from unwanted room reflections and background noise while ensuring high intelligibility even in challenging sonic environments.
Stainless Spring Steel Mesh Grille & Beveled Edge
With robust all-metal construction and a beveled stainless spring steel mesh grille, the V2 SWITCH can handle rugged stage use and touring environments, and the flat edges of the beveled grille prevent the V2 SWITCH from rolling away and potentially falling, keeping your mic safe on busy stages.
Integrated Windscreen & Shockmount
Its internal windscreen reduces unwanted wind noise and plosive pops, while its integrated shockmount reduces handling noise, footfall noise, and any rumble, so you can perform passionately and be heard with clarity.
NOW AVAILABLE: THE V2 SWITCH XLR
Including the same great V2 SWITCH you are used to but equipped with a 15-foot / 5-meter XLR-to-XLR cable ideal for vocals, speech, and a wide range of instruments. Experience the V2 SWITCH XLR to enable your best performance, complete with the cable you need to go LIVE.
ALSO AVAILABLE: THE V2 SWITCH QTR
Including the same great V2 SWITCH you are used to but equipped with a 15-foot / 5-meter XLR-to-1/4” cable with a tip-sleeve jack ideal for vocals, speech, and a wide range of instruments. Experience the V2 SWITCH QTR to enable your best performance, complete with the cable you need to go LIVE.
Integrated No-Slip On / Off Switch
Ideal for use as a talkback microphone or for paging applications, the integrated on/off switch allows you to seamlessly mute the V2 SWITCH. This is also a convenient feature on stage during downtime or when passing the microphone to a guest speaker.
All-Metal Housing & Gold-Plated XLR Connector
With robust all-metal construction, a beveled stainless spring steel mesh grille, and gold-plated XLR contacts, the V2 SWITCH ensures durability, reliability, and corrosion-free operation for years of demanding use.
| Weight | 0.52 kg |
|---|---|
| Dimensions | 25.40 × 13.46 × 6.86 cm |
| Color: |
Black |
| Connector: |
XLR |
| Included Accessories: |
Carry Pouch, Mic Clip, Thread Adapter |
| Output Impedance: |
630 ohms |
| Polar Pattern: |
Supercardioid |
| Microphone Type |
Dynamic |
| Sensitivity |
-51 dBV/Pa |
Related products
sE Electronics BL8 Cardioid Boundary Microphone
- Cardiod Boundary Microphone with Condenser Capsule
- Condenser capsule supplies pristine sound pickup
- Character switch imparts classic or modern sound quality to your signal
- Switchable low-cut filter tames the low end when needed
- Attenuation switch gives you two input pads
- Low-profile design effortlessly fits into confined spaces
- Compatible with Kelly Shu microphone mounts
sE Electronics Reflexion Filter X Portable Vocal Booth
- Portable Acoustic Treatment/Reflexion Filter to Reduce Room Ambience
- Proven four-layer acoustic filter design
- Multi-layer to ensure almost zero sound coloration
- Capture a great-sounding recording anywhere
- Just like the RF Pro and RF SPACE, each RF-X is assembled by hand in the sE factory
- Now available in multiple finishes
- Provides stellar performance and ease-of-use
sE Electronics sE2300 Studio Condenser Microphone
- Large-diaphragm Condenser Microphone
- Discrete Class A components ensure top-shelf sound quality
- Cardioid, omni, and figure-8 polar patterns
- Ideal for everything from vocals to drum overheads to guitar amps
- Handcrafted 1" condenser capsule
- 80Hz/160Hz highpass filter and -10dB/-20dB pad
- Extremely low noise and high SPL handling
sE Electronics sE4100 Large-Diaphragm Condenser Microphone
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- Twin 1" Gold-sputtered Brass Capsule
- 80Hz/160Hz Low-cut Filters, and -10dB-/20dB Pads
- The cardioid-only version of the renowned sE4400
- The very same hand-crafted twin 1“ gold-sputtered brass capsule as the sE4400
- True condenser cardioid capsule
- Individually tuned in our own factory
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone – MATCHEDPAIR
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- cardioid, omnidirectional, figure-eight, and hypercardioid
sE Electronics SPACE Reflection Filter
- Portable Acoustic Treatment to Reduce Room Ambience
- Hand-built by our team at the sE factory
- Our most advanced patented multi-layer technologies
- Creates a balanced, acoustically neutral environment
- Multi-layer technology ensures zero sound coloration
- The choice of renowned recording artists worldwide
- Specialized and stable mounting hardware
- Full-bandwidth absorption, isolation, and diffusion
sE Electronics X1 S Studio Bundle
- Recording Bundle with sE Electronics X1 S Condenser Microphone,
- Isolation Filter, Shockmount, Pop Filter, and 3m Mic Cable.
- Hand-made, gold-sputtered 1" capsule
- All-metal capsule, with no plastic parts for long term reliability
- Fixed cardioid polar pattern
- Switchable -10dB/-20dB pad
- Handles loud sound sources up to 160dB SPL without distortion