sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone
AED 1,995.000 Excl. VAT
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
Available on backorder
T2
Titanium makes the difference
The T2 appeals with its down-to-earth elegance, offering discrete electronics prioritizing the features you really need. With titanium being much stiffer and three times lighter than gold, your transients will never be the same.
Inside the T2
HAND-CRAFTED 1″ TITANIUM-SPUTTERED TRUE CONDENSER CAPSULE
The T2’s titanium-sputtered capsule is much stiffer and three times lighter than gold, giving it a quicker transient response than gold-sputtered capsules, which is essential when recording instruments that have fast attack – like drums and percussion – to maintain clarity and deliver exceptionally accurate performance.
FREE OF THRILLS, NO LEDs. NO PLASTIC SWITCHES.
Select between 4 polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments.
DENT-PROOF METAL HOUSING & PREMIUM FINISH
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the T2 is built to last for years of demanding studio use and the day-to-day life of a touring artist.
SWITCHABLE PRE ATTENUATION PAD & BASS-CUT FILTER
Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums, and brass instruments. With two low-cut filters, easily tame excessive low-frequency rumble and proximity effect and efficiently adjust for close-miking techniques.
AVAILABLE AS A MATCHED STEREO-PAIR
Each T2 Matched-Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two T2 microphones.
Weight | 2.40 kg |
---|---|
Dimensions | 33.02 × 19.81 × 10.16 cm |
Color: |
Silver |
Connector: |
XLR |
Diaphragm Size: |
1" (25.4mm) |
Frequency Range: |
20Hz-20kHz |
Included Accessories: |
Shockmount, Hardshell Case, Thread Adapter |
Low Cut Filter: |
40 / 80Hz (-6dB/octave), switchable |
Max SPL: |
137 dB SPL (0.5% THD @ 1kHz) |
Output Impedance: |
22 ohms |
Pads: |
-10dB, -20dB |
Polar Pattern: |
Cardioid, Hypercardioid, Omni-directional, Figure-8 |
Power Source: |
48V phantom power |
Self Noise: |
13dB A weighted |
Microphone Type |
Condenser |
Related products
sE Electronics BL8 Cardioid Boundary Microphone
- Cardiod Boundary Microphone with Condenser Capsule
- Condenser capsule supplies pristine sound pickup
- Character switch imparts classic or modern sound quality to your signal
- Switchable low-cut filter tames the low end when needed
- Attenuation switch gives you two input pads
- Low-profile design effortlessly fits into confined spaces
- Compatible with Kelly Shu microphone mounts
sE Electronics DM1 Dynamite Active In-Line Microphone Preamplifier – Red
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 28dB of Gain
- Adds +28dB of clean gain to low-output passive microphones for proper gain staging
- Class A electronics offer a neutral sound
- Output buffer ensures the unit provides consistent gain regardless of load
- Low output impedance ensures you get a clean signal regardless of cable length
- Gold-plated connectors offer a loss-free and reliable connection
- Rugged metal housing stands up to punishment
sE Electronics Reflexion Filter X Portable Vocal Booth
- Portable Acoustic Treatment/Reflexion Filter to Reduce Room Ambience
- Proven four-layer acoustic filter design
- Multi-layer to ensure almost zero sound coloration
- Capture a great-sounding recording anywhere
- Just like the RF Pro and RF SPACE, each RF-X is assembled by hand in the sE factory
- Now available in multiple finishes
- Provides stellar performance and ease-of-use
sE Electronics Reflexion Filter X Portable Vocal Booth – RED
- Portable Acoustic Treatment/Reflexion Filter to Reduce Room Ambience
- Proven four-layer acoustic filter design
- Multi-layer to ensure almost zero sound coloration
- Capture a great-sounding recording anywhere
- Just like the RF Pro and RF SPACE, each RF-X is assembled by hand in the sE factory
- Now available in multiple finishes
- Provides stellar performance and ease-of-use
sE Electronics sE2300 Studio Condenser Microphone
- Large-diaphragm Condenser Microphone
- Discrete Class A components ensure top-shelf sound quality
- Cardioid, omni, and figure-8 polar patterns
- Ideal for everything from vocals to drum overheads to guitar amps
- Handcrafted 1" condenser capsule
- 80Hz/160Hz highpass filter and -10dB/-20dB pad
- Extremely low noise and high SPL handling
sE Electronics V Kick Dynamic Percussion Instrument Microphone
- Dynamic Kick Drum Microphone with Supercardioid Polar Pattern
- Switchable Classic/Modern voicing
- One of the most compact kick drum mics on the market
- Purpose-built capsule designed to capture low frequencies at high SPLs
- Patented internal shockmount
- Sophisticated supercardioid capsule design
- All-metal housing with premium finish
sE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone
- with -10dB/-20dB Pad and Low-cut Filters
- Custom-designed hand-crafted true condenser capsule individually tuned
- A refined version of sE's best-selling X1
- Improved sensitivity, dramatically increased SPL handling (up to 160dB!)
- Hand-made metal housing and gold-sputtered diaphragms
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads
sE Electronics X1 S Studio Bundle
- Recording Bundle with sE Electronics X1 S Condenser Microphone,
- Isolation Filter, Shockmount, Pop Filter, and 3m Mic Cable.
- Hand-made, gold-sputtered 1" capsule
- All-metal capsule, with no plastic parts for long term reliability
- Fixed cardioid polar pattern
- Switchable -10dB/-20dB pad
- Handles loud sound sources up to 160dB SPL without distortion