sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone
AED 1,995.000 Excl. VAT
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
Available on backorder
T2
Titanium makes the difference
The T2 appeals with its down-to-earth elegance, offering discrete electronics prioritizing the features you really need. With titanium being much stiffer and three times lighter than gold, your transients will never be the same.
Inside the T2
HAND-CRAFTED 1″ TITANIUM-SPUTTERED TRUE CONDENSER CAPSULE
The T2’s titanium-sputtered capsule is much stiffer and three times lighter than gold, giving it a quicker transient response than gold-sputtered capsules, which is essential when recording instruments that have fast attack – like drums and percussion – to maintain clarity and deliver exceptionally accurate performance.
FREE OF THRILLS, NO LEDs. NO PLASTIC SWITCHES.
Select between 4 polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments.
DENT-PROOF METAL HOUSING & PREMIUM FINISH
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the T2 is built to last for years of demanding studio use and the day-to-day life of a touring artist.
SWITCHABLE PRE ATTENUATION PAD & BASS-CUT FILTER
Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums, and brass instruments. With two low-cut filters, easily tame excessive low-frequency rumble and proximity effect and efficiently adjust for close-miking techniques.
AVAILABLE AS A MATCHED STEREO-PAIR
Each T2 Matched-Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two T2 microphones.
Weight | 2.40 kg |
---|---|
Dimensions | 33.02 × 19.81 × 10.16 cm |
Color: |
Silver |
Connector: |
XLR |
Diaphragm Size: |
1" (25.4mm) |
Frequency Range: |
20Hz-20kHz |
Included Accessories: |
Shockmount, Hardshell Case, Thread Adapter |
Low Cut Filter: |
40 / 80Hz (-6dB/octave), switchable |
Max SPL: |
137 dB SPL (0.5% THD @ 1kHz) |
Output Impedance: |
22 ohms |
Pads: |
-10dB, -20dB |
Polar Pattern: |
Cardioid, Hypercardioid, Omni-directional, Figure-8 |
Power Source: |
48V phantom power |
Self Noise: |
13dB A weighted |
Microphone Type |
Condenser |
Related products
sE Electronics NEOM USB Cardioid Condenser Microphone
- Plug-and-play USB condenser microphone
- Cardioid polarity with focused recording
- Ultra-low latency design for lag-free audio and streaming
- Independent knob controls for level, gain, and playback volume
- Onboard mute button
- Built-in headphone port
- Universal mic shaft that’s ready for use with studio equipmen
sE Electronics sE X1R Ribbon Microphone
sE Electronics SE-T1-U Large-diaphragm Condenser Microphone
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- The cardioid-only version of the renowned T2
- The very same hand-crafted twin 1“ titanium-sputtered brass capsule as the T2
- Titanium-sputtered true condenser cardioid capsule
- Accurate definition and fast transient response
- Built roadworthy with all-metal housing
- Innovative close-miking shockmount
- 80 / 160 Hz low-cut filters and -10 / -20 dB pads
sE Electronics sE4100 Large-Diaphragm Condenser Microphone
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- Twin 1" Gold-sputtered Brass Capsule
- 80Hz/160Hz Low-cut Filters, and -10dB-/20dB Pads
- The cardioid-only version of the renowned sE4400
- The very same hand-crafted twin 1“ gold-sputtered brass capsule as the sE4400
- True condenser cardioid capsule
- Individually tuned in our own factory
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone – MATCHEDPAIR
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- cardioid, omnidirectional, figure-eight, and hypercardioid
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone – Matched Pair
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics V7 Supercardioid Dynamic Handheld Vocal Microphone
- Handheld Supercardioid Dynamic Microphone
- Specialized aluminum voice coil offers superb sound reproduction
- Integrated shockmount eliminates rumble and handling noise
- Internal windscreen prevents wind noise and plosives
- Both red and black windscreens are included to suit your style
- Beveled edge keeps the mic from rolling around when you set it down
- Gold-plated XLR connector ensures a solid, reliable connection
sE Electronics X1 A Large-diaphragm Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone
- with -20dB Pad and 100Hz Highpass Filter - Black
- Newly-developed condenser capsule with the same rugged metal chassis of the X1 SERIES
- First-class sound & specifications at an even better "home studio" cost
- Extremely natural frequency response, massive SPL-handling capabilities (150dB!)
- Switchable attenuation and low-cut filters, with a perfectly balanced sensitivity level
- 100 Hz bass-cut filter and -20 dB attenuation pad