sE Electronics sE7 Small-diaphragm Condenser Microphone – Matched Pair
AED 885.000 Excl. VAT
- Small-diaphragm Cardioid Condenser Mic
- Optimized acoustic design, discrete class-A circuitry
- Clear, natural sound quality at all frequencies
- Switchable -20dB attenuation pad
- High sound pressure level (SPL) handling capability
- Switchable low-cut 80 Hz filter
- Extremely low-noise components
Available on backorder
sE7
A compact & classy condenser
The sE7 is a high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond.
Inside the sE7
HIGH-QUALITY CONDENSER CAPSULE
The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source.
THE QUIETEST PENCIL MIC IN ITS CLASS
With a very short signal path and state-of-the-art electronics, the sE7 is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth.
SWITCHABLE PRE-ATTENUATION PAD
The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums.
SWITCHABLE LOW-CUT FILTER
The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques.
BUILT LIKE A TANK
The sE7’s all-metal chassis provides efficient rejection of any electrical interference and noise, and its high-quality finish ensures a great look for years to come, and the gold-plated XLR connector ensures a loss-free, reliable signal for years of demanding use.
sE7 Matched Pair
sE7 Matched Pair
Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance. The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings.
Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance. The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings.
Weight | 0.50 kg |
---|---|
Dimensions | 20.19 × 15.24 × 5.33 cm |
Color: |
Black |
Connector: |
XLR |
Diaphragm Size: |
0.5" capsule |
Frequency Range: |
20Hz-20kHz |
Low Cut Filter: |
80Hz, 6dB/Octave |
Max SPL: |
136dB SPL, 156dB (with pad) |
Output Impedance: |
<200 ohms |
Pads: |
20dB |
Polar Pattern: |
Cardioid |
Power Source: |
48V phantom power |
Self Noise: |
78dB |
Microphone Type |
Condenser |
Related products
sE Electronics DM1 Dynamite Active In-Line Microphone Preamplifier – Red
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 28dB of Gain
- Adds +28dB of clean gain to low-output passive microphones for proper gain staging
- Class A electronics offer a neutral sound
- Output buffer ensures the unit provides consistent gain regardless of load
- Low output impedance ensures you get a clean signal regardless of cable length
- Gold-plated connectors offer a loss-free and reliable connection
- Rugged metal housing stands up to punishment
sE Electronics Reflexion Filter X Portable Vocal Booth
- Portable Acoustic Treatment/Reflexion Filter to Reduce Room Ambience
- Proven four-layer acoustic filter design
- Multi-layer to ensure almost zero sound coloration
- Capture a great-sounding recording anywhere
- Just like the RF Pro and RF SPACE, each RF-X is assembled by hand in the sE factory
- Now available in multiple finishes
- Provides stellar performance and ease-of-use
sE Electronics Reflexion Filter X Portable Vocal Booth – RED
- Portable Acoustic Treatment/Reflexion Filter to Reduce Room Ambience
- Proven four-layer acoustic filter design
- Multi-layer to ensure almost zero sound coloration
- Capture a great-sounding recording anywhere
- Just like the RF Pro and RF SPACE, each RF-X is assembled by hand in the sE factory
- Now available in multiple finishes
- Provides stellar performance and ease-of-use
sE Electronics RNT Rupert Neve Signature Series Multi-Pattern Tube Condenser Microphone
- Large-diaphragm Tube Condenser Microphone with 9 Polar Patterns
- Fully discrete, Class-A electronics in both active stages
- The finest true condenser capsule we've ever built
- The same custom op-amps used in Rupert Neve Designs' flagship 5088 console
- Switchable gain and a massive dynamic range
- 9-position polar pattern switch for precise balance between direct and ambient sound
sE Electronics SE-T1-U Large-diaphragm Condenser Microphone
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- The cardioid-only version of the renowned T2
- The very same hand-crafted twin 1“ titanium-sputtered brass capsule as the T2
- Titanium-sputtered true condenser cardioid capsule
- Accurate definition and fast transient response
- Built roadworthy with all-metal housing
- Innovative close-miking shockmount
- 80 / 160 Hz low-cut filters and -10 / -20 dB pads
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone – Matched Pair
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics X1 S Studio Bundle
- Recording Bundle with sE Electronics X1 S Condenser Microphone,
- Isolation Filter, Shockmount, Pop Filter, and 3m Mic Cable.
- Hand-made, gold-sputtered 1" capsule
- All-metal capsule, with no plastic parts for long term reliability
- Fixed cardioid polar pattern
- Switchable -10dB/-20dB pad
- Handles loud sound sources up to 160dB SPL without distortion