sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone – MATCHEDPAIR
AED 3,995.000 Excl. VAT
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- cardioid, omnidirectional, figure-eight, and hypercardioid
Available on backorder
sE4400
Classic versatility at its finest
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille that can take a beating during day-to-day tour life. The sE4400 appeals with its down-to-earth elegance, offering discrete electronics prioritizing the features you really need.
Inside the sE4400
HAND-CRAFTED 1″ TRUE CONDENSER CAPSULE
Individually tuned and cared for by sE’s skilled technicians, each sE4400’s hand-crafted, gold-sputtered, dual-diaphragm capsule captures sound sources of all kinds with breathtaking clarity and precision, be it in demanding studio or fast-paced live environments.
FREE OF THRILLS, NO LEDs. NO PLASTIC SWITCHES.
Select between 4 polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments.
DENT-PROOF METAL HOUSING & PREMIUM FINISH
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the sE4400 is built to last for years of demanding studio use and the day-to-day life of a touring artist.
SWITCHABLE PRE ATTENUcATION PAD & BASS-CUT FILTER
Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums, and brass instruments. With two low-cut filters, easily tame excessive low-frequency rumble and proximity effect and efficiently adjust for close-miking techniques.
AVAILABLE AS A MATCHED STEREO-PAIR
Each sE4400 Matched Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two sE4400 microphones.
Inside the sE4400 Matched-Pair & Shockmount
TUNED & SONICALLY MATCHED IN-HOUSE
Each sE4400 Matched-Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two sE4400 microphones.
CUSTOM SHOCKMOUNT + CHASSIS
The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, used flat against a drum head or guitar cab, among many other use cases, and provides exceptional protection from low-end rumble and footfall noise.
| Weight | 3.65 kg |
|---|---|
| Dimensions | 35.81 × 27.69 × 14.73 cm |
| Color: |
Black |
| Connector: |
XLR |
| Diaphragm Size: |
1" (25.4mm) |
| Included Accessories: |
Shockmount, Hardshell Case, Threaded Adapter |
| Low Cut Filter: |
40 / 80Hz (-6dB/octave), switchable |
| Max SPL: |
137 dB SPL (0.5% THD @ 1kHz) |
| Output Impedance: |
22 ohms |
| Pads: |
-10dB, -20dB |
| Polar Pattern: |
Cardioid, Hypercardioid, Omni-directional, Figure-8 Cardioid, Hypercardioid, Omni-directional, Figure-8 |
| Power Source: |
48V phantom power |
| Self Noise: |
13dB A weighted |
| Microphone Type |
Condenser |
Related products
sE Electronics BL8 Cardioid Boundary Microphone
- Cardiod Boundary Microphone with Condenser Capsule
- Condenser capsule supplies pristine sound pickup
- Character switch imparts classic or modern sound quality to your signal
- Switchable low-cut filter tames the low end when needed
- Attenuation switch gives you two input pads
- Low-profile design effortlessly fits into confined spaces
- Compatible with Kelly Shu microphone mounts
sE Electronics DM1 Dynamite Active In-Line Microphone Preamplifier – Red
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 28dB of Gain
- Adds +28dB of clean gain to low-output passive microphones for proper gain staging
- Class A electronics offer a neutral sound
- Output buffer ensures the unit provides consistent gain regardless of load
- Low output impedance ensures you get a clean signal regardless of cable length
- Gold-plated connectors offer a loss-free and reliable connection
- Rugged metal housing stands up to punishment
sE Electronics sE2200 Large-diaphragm Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone with 80/160Hz
- Hand-crafted 1” true condenser capsule individually tuned in our own factory
- The same condenser microphone loved by an entire generation of engineers
- Traditional Class-A electronic design with consistent low-noise performance
- Custom-built output transformer and massively shielded all-metal housing
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads
sE Electronics sE2300 Studio Condenser Microphone
- Large-diaphragm Condenser Microphone
- Discrete Class A components ensure top-shelf sound quality
- Cardioid, omni, and figure-8 polar patterns
- Ideal for everything from vocals to drum overheads to guitar amps
- Handcrafted 1" condenser capsule
- 80Hz/160Hz highpass filter and -10dB/-20dB pad
- Extremely low noise and high SPL handling
sE Electronics sE4100 Large-Diaphragm Condenser Microphone – Matched Pair
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- Twin 1" Gold-sputtered Brass Capsule
- 80Hz/160Hz Low-cut Filters, and -10dB-/20dB Pads
- The cardioid-only version of the renowned sE4400
- The very same hand-crafted twin 1“ gold-sputtered brass capsule as the sE4400
- True condenser cardioid capsule
- Individually tuned in our own factory
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics V7 MC1 Capsule for Shure Wireless
- Supercardioid Dynamic Microphone Capsule for Shure Wireless Systems
- Captures your voice in the most natural way you've ever heard on stage
- All-metal beveled spring grille
- Specialized supercardioid aluminum voice coil
- Patented integrated shockmount
- Switchable internal windscreen
- Available in two different color combinations