sE Electronics sE X1R Ribbon Microphone
AED 965.000 Excl. VAT
- Passive Ribbon Microphone with 20Hz-16kHz Frequency Response
- High SPL handling 135dB max SPL
- Extended high frequency response gives you more brightness
- Ideal for acoustic instruments, vocals, and drum overheads
- Figure-8 pickup pattern
Available on backorder
X1 R
A rugged ribbon for any purpose
The second addition to the X1 Series, the X1 R brings the magic of traditional ribbon mics into the modern age with a tough construction that can handle any SPL. This is a ribbon you can take on the road. The sE Electronics X1 R is suited to a variety of recording applications, including guitar cabs, overhead drums, brass, woodwind, strings, commercial broadcast and voice-over.
Inside the X1 R
HIGH SPL FOR MORE THAN VOCALS
This is a ribbon you can take on the road. The sE Electronics X1 R’s high SPL is suited to a variety of recording applications including guitar cabs, overhead drums, brass, woodwind, strings, commercial broadcast and voice-over.
STATE OF THE ART RIBBON ELEMENT
Enclosed by top-grade Neodymium magnets boasts some of our latest ribbon microphone technologies. We have combined our traditional ribbon technology with some of the mechanical elements of our own VR1/VR2 microphone HF (High Frequency) extension technology to bring you a classic sounding ribbon mic with a gentle HF lift.
VINTAGE SOUND WITH MODERN BUILD
Drawing on some of the technologies in our VR1 & VR2 ribbon mics, the X1 R is a vintage-modern hybrid that provides all the inherent smoothness of a hand-crafted ribbon mic, but with more versatility, durability, and ease of use than the delicate ribbons of yesteryear.
ALL-METAL HOUSING & PREMIUM FINISH
Unlike the cheaply constructed bodies of some other affordable microphones, the X1 R’s all-metal housing provides efficient rejection of any electrical interference and noise – and the high-quality finish ensures a great look for years to come.
| Weight | 0.5 kg |
|---|---|
| Dimensions | 26.92 × 12.95 × 10.16 cm |
| Microphone Type: |
Ribbon |
| Ribbon Type: |
2-micron Aluminum |
| Polar Pattern: |
Figure-8 |
| Frequency Response: |
20Hz-16kHz |
| Output Impedance: |
200 ohms |
| Connector: |
XLR |
Related products
sE Electronics BL8 Cardioid Boundary Microphone
- Cardiod Boundary Microphone with Condenser Capsule
- Condenser capsule supplies pristine sound pickup
- Character switch imparts classic or modern sound quality to your signal
- Switchable low-cut filter tames the low end when needed
- Attenuation switch gives you two input pads
- Low-profile design effortlessly fits into confined spaces
- Compatible with Kelly Shu microphone mounts
sE Electronics NEOM USB Cardioid Condenser Microphone
- Plug-and-play USB condenser microphone
- Cardioid polarity with focused recording
- Ultra-low latency design for lag-free audio and streaming
- Independent knob controls for level, gain, and playback volume
- Onboard mute button
- Built-in headphone port
- Universal mic shaft that’s ready for use with studio equipmen
sE Electronics RNT Rupert Neve Signature Series Multi-Pattern Tube Condenser Microphone
- Large-diaphragm Tube Condenser Microphone with 9 Polar Patterns
- Fully discrete, Class-A electronics in both active stages
- The finest true condenser capsule we've ever built
- The same custom op-amps used in Rupert Neve Designs' flagship 5088 console
- Switchable gain and a massive dynamic range
- 9-position polar pattern switch for precise balance between direct and ambient sound
sE Electronics SE-T1-U Large-diaphragm Condenser Microphone
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- The cardioid-only version of the renowned T2
- The very same hand-crafted twin 1“ titanium-sputtered brass capsule as the T2
- Titanium-sputtered true condenser cardioid capsule
- Accurate definition and fast transient response
- Built roadworthy with all-metal housing
- Innovative close-miking shockmount
- 80 / 160 Hz low-cut filters and -10 / -20 dB pads
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone – MATCHEDPAIR
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- cardioid, omnidirectional, figure-eight, and hypercardioid
sE Electronics T1 Large-diaphragm Condenser Microphone – Matched Pair
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- The cardioid-only version of the renowned T2
- The very same hand-crafted twin 1“ titanium-sputtered brass capsule as the T2
- Titanium-sputtered true condenser cardioid capsule
- Accurate definition and fast transient response
- Built roadworthy with all-metal housing
- Innovative close-miking shockmount
- 80 / 160 Hz low-cut filters and -10 / -20 dB pads
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics V7 MC1 Capsule for Shure Wireless
- Supercardioid Dynamic Microphone Capsule for Shure Wireless Systems
- Captures your voice in the most natural way you've ever heard on stage
- All-metal beveled spring grille
- Specialized supercardioid aluminum voice coil
- Patented integrated shockmount
- Switchable internal windscreen
- Available in two different color combinations