sE Electronics sE X1R Ribbon Microphone
965.00 Excl. VAT
- Passive Ribbon Microphone with 20Hz-16kHz Frequency Response
- High SPL handling 135dB max SPL
- Extended high frequency response gives you more brightness
- Ideal for acoustic instruments, vocals, and drum overheads
- Figure-8 pickup pattern
Available on backorder
X1 R
A rugged ribbon for any purpose
The second addition to the X1 Series, the X1 R brings the magic of traditional ribbon mics into the modern age with a tough construction that can handle any SPL. This is a ribbon you can take on the road. The sE Electronics X1 R is suited to a variety of recording applications, including guitar cabs, overhead drums, brass, woodwind, strings, commercial broadcast and voice-over.
Inside the X1 R
HIGH SPL FOR MORE THAN VOCALS
This is a ribbon you can take on the road. The sE Electronics X1 R’s high SPL is suited to a variety of recording applications including guitar cabs, overhead drums, brass, woodwind, strings, commercial broadcast and voice-over.
STATE OF THE ART RIBBON ELEMENT
Enclosed by top-grade Neodymium magnets boasts some of our latest ribbon microphone technologies. We have combined our traditional ribbon technology with some of the mechanical elements of our own VR1/VR2 microphone HF (High Frequency) extension technology to bring you a classic sounding ribbon mic with a gentle HF lift.
VINTAGE SOUND WITH MODERN BUILD
Drawing on some of the technologies in our VR1 & VR2 ribbon mics, the X1 R is a vintage-modern hybrid that provides all the inherent smoothness of a hand-crafted ribbon mic, but with more versatility, durability, and ease of use than the delicate ribbons of yesteryear.
ALL-METAL HOUSING & PREMIUM FINISH
Unlike the cheaply constructed bodies of some other affordable microphones, the X1 R’s all-metal housing provides efficient rejection of any electrical interference and noise – and the high-quality finish ensures a great look for years to come.
| Weight | 0.5 kg |
|---|---|
| Dimensions | 26.92 × 12.95 × 10.16 cm |
| Microphone Type: |
Ribbon |
| Ribbon Type: |
2-micron Aluminum |
| Polar Pattern: |
Figure-8 |
| Frequency Response: |
20Hz-16kHz |
| Output Impedance: |
200 ohms |
| Connector: |
XLR |
Related products
sE Electronics Reflexion Filter X Portable Vocal Booth – White
- Portable Acoustic Treatment/Reflexion Filter to Reduce Room Ambience
- Proven four-layer acoustic filter design
- Multi-layer to ensure almost zero sound coloration
- Capture a great-sounding recording anywhere
- Just like the RF Pro and RF SPACE, each RF-X is assembled by hand in the sE factory
- Now available in multiple finishes
- Provides stellar performance and ease-of-use
sE Electronics RF PRO Reflexion Filter PRO
- Portable Acoustic Treatment to Reduce Room Ambience
- The original Reflexion Filter invented by sE
- Patented multi-layer technology
- Works evenly across the whole frequency spectrum
- Ensures a balanced, even sound with no coloration at all
- The choice of renowned recording artists worldwide
- Each Reflexion Filter is hand-made in our very own factory
sE Electronics RNT Rupert Neve Signature Series Multi-Pattern Tube Condenser Microphone
- Large-diaphragm Tube Condenser Microphone with 9 Polar Patterns
- Fully discrete, Class-A electronics in both active stages
- The finest true condenser capsule we've ever built
- The same custom op-amps used in Rupert Neve Designs' flagship 5088 console
- Switchable gain and a massive dynamic range
- 9-position polar pattern switch for precise balance between direct and ambient sound
sE Electronics sE2200 Large-diaphragm Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone with 80/160Hz
- Hand-crafted 1” true condenser capsule individually tuned in our own factory
- The same condenser microphone loved by an entire generation of engineers
- Traditional Class-A electronic design with consistent low-noise performance
- Custom-built output transformer and massively shielded all-metal housing
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone – MATCHEDPAIR
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- cardioid, omnidirectional, figure-eight, and hypercardioid
sE Electronics SPACE Reflection Filter
- Portable Acoustic Treatment to Reduce Room Ambience
- Hand-built by our team at the sE factory
- Our most advanced patented multi-layer technologies
- Creates a balanced, acoustically neutral environment
- Multi-layer technology ensures zero sound coloration
- The choice of renowned recording artists worldwide
- Specialized and stable mounting hardware
- Full-bandwidth absorption, isolation, and diffusion
sE Electronics V7 Supercardioid Dynamic Handheld Vocal Microphone
- Handheld Supercardioid Dynamic Microphone
- Specialized aluminum voice coil offers superb sound reproduction
- Integrated shockmount eliminates rumble and handling noise
- Internal windscreen prevents wind noise and plosives
- Both red and black windscreens are included to suit your style
- Beveled edge keeps the mic from rolling around when you set it down
- Gold-plated XLR connector ensures a solid, reliable connection
sE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone
- with -10dB/-20dB Pad and Low-cut Filters
- Custom-designed hand-crafted true condenser capsule individually tuned
- A refined version of sE's best-selling X1
- Improved sensitivity, dramatically increased SPL handling (up to 160dB!)
- Hand-made metal housing and gold-sputtered diaphragms
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads