sE Electronics DM2 TNT Active In-Line Microphone Preamplifier – Black
AED 465.000 Excl. VAT
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 15dB – 30dB of Gain
- Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
- Eight load settings ranging from 50 ohms to 10 mega ohms to precisely match any mic
- Sophisticated class-A design and specially-selected high-grade FETs for a signal boost w/o coloration
- Vastly lower output impedance and nearly half the noise of anything else on the market
- All-metal housing and premium finish
- Gold plated XLR connector for loss-free reliable signal connection
In stock
DM2 TNT
Explosive level for all your passive mics
The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone.
Inside the DM2 TNT
SIGNIFICANTLY IMPROVED LEVEL TO YOUR MIC PREAMP
The DM2 provides switchable +15dB or +30dB of consistent gain regardless of the connected load, thanks to its dedicated buffer amplifier providing you more flexibility for your particular applications.
CLASS-A DESIGN & LOWEST NOISE IN ITS CLASS
Class-A design and specially-selected high-grade FETs enable vastly lower output impedance and the lowest noise in its class providing the gain needed to for a clean sound and much less noise.
MATCH THE IMPEDANCE OF YOUR FAVORITE MIC
From an unconventionally low 50 ohms to stunningly high 10 mega ohms to match your preamp with any mic accurately to ruthlessly boost the signal independent from load impedance or cable length.
DEDICATED OUTPUT BUFFER AMPLIFIER & RELIABLE SIGNAL CONNECTION
The output impedance is also the lowest in its class, allowing long cable runs while reducing susceptibility to RF interference, buzz and hum with a gold-plated XLR connector for loss-free signal connection.
SLIM, RUGGED ALL-METAL HOUSING & PREMIUM FINISH
Reliable operation in demanding environments & on-stage applications. Robust construction with high-quality manufacturing standards.
NOW ALSO VAILABLE IN BLACK
| Weight | 0.12 kg |
|---|---|
| Dimensions | 16.13 × 3.18 × 3.18 cm |
| Channels: |
1 |
| Features: |
15dB/30dB Gain Boost, 8 Impedance Load Settings |
| Outputs: |
1 x XLR |
| Type: |
Dynamic/Ribbon Mic Booster |
| Inputs |
1 x XLR |
Related products
sE Electronics guitaRF Reflexion Filter with Stand
- Portable Iso Booth Designed Specifically for Miking Guitar Cabinets
- A Reflexion Filter for your guitar cab to provide isolation on loud stages
- Used in venues to help control instrument bleed
- A friendly studio companion that provides additional isolation
- A dual mic mount ensures a safer on-stage experience
- Thanks to its dual mic mount, experience immediate phase alignment
- Minimal stage bleed and coloration allows the ideal filtration
sE Electronics sE4100 Large-Diaphragm Condenser Microphone – Matched Pair
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- Twin 1" Gold-sputtered Brass Capsule
- 80Hz/160Hz Low-cut Filters, and -10dB-/20dB Pads
- The cardioid-only version of the renowned sE4400
- The very same hand-crafted twin 1“ gold-sputtered brass capsule as the sE4400
- True condenser cardioid capsule
- Individually tuned in our own factory
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics sE4400 Multi-pattern Large-diaphragm Condenser Microphone – MATCHEDPAIR
- Multi-pattern Large-diaphragm Condenser Microphone
- w/ Attenuation Pads, Low-cut Switches, Shockmount, and Case
- Hand-crafted condenser capsule tuned in our own factory
- Classic vintage sound and all-metal housing
- Switchable pickup patterns
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- cardioid, omnidirectional, figure-eight, and hypercardioid
sE Electronics V7 Supercardioid Dynamic Handheld Vocal Microphone
- Handheld Supercardioid Dynamic Microphone
- Specialized aluminum voice coil offers superb sound reproduction
- Integrated shockmount eliminates rumble and handling noise
- Internal windscreen prevents wind noise and plosives
- Both red and black windscreens are included to suit your style
- Beveled edge keeps the mic from rolling around when you set it down
- Gold-plated XLR connector ensures a solid, reliable connection
sE Electronics X1 A Large-diaphragm Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone
- with -20dB Pad and 100Hz Highpass Filter - Black
- Newly-developed condenser capsule with the same rugged metal chassis of the X1 SERIES
- First-class sound & specifications at an even better "home studio" cost
- Extremely natural frequency response, massive SPL-handling capabilities (150dB!)
- Switchable attenuation and low-cut filters, with a perfectly balanced sensitivity level
- 100 Hz bass-cut filter and -20 dB attenuation pad
sE Electronics X1 S Studio Bundle
- Recording Bundle with sE Electronics X1 S Condenser Microphone,
- Isolation Filter, Shockmount, Pop Filter, and 3m Mic Cable.
- Hand-made, gold-sputtered 1" capsule
- All-metal capsule, with no plastic parts for long term reliability
- Fixed cardioid polar pattern
- Switchable -10dB/-20dB pad
- Handles loud sound sources up to 160dB SPL without distortion