Marshall ST20C – 20W Combo
4,396.00 Excl. VAT
- 2-channel, 20-watt tube combo amplifier inspired by Marshall’s early 2245 model
- Dual 5881 power tubes, 2 ECC83 preamp tubes, and an ECC83 phase splitter capture the creamy highs, loose lows, and exceptionally dynamic overdrive of the original JTM
- Celestion G12M-65 Creamback speaker offers a slightly higher power rating and enhanced bass response over the original Creamback found in early Marshall amps
- High Treble and Normal channels can be patched together for endless tonal experimentation
- Treble, Middle, Bass, and Presence knobs to dial in your sound to perfection
- Speaker-emulated DI output for easy recording and straight-to-PA gigging
- FX loop makes it a breeze to integrate your favorite time-based and modulation pedals
- JTM-inspired aesthetics, including levant front covering, metal “coffin” logo, gold piping, and fawn fret
- Premium finger-jointed plywood enclosure
Available on backorder
Description
Power reduction from 20W to 5W at the flick of a switch
This amplifier gives you the flexibility to adjust your power output based on your surroundings. Choose between 20W and 5W power output at the flick of a switch. Perfect for jumping from the rehearsal room to your home and back again.
Inspired by the original JTM45
The Studio JTM line of amplifiers replicates the renowned, velvety tones of the original Marshall JTM, and it looks every bit as wonderful as it sounds. Whether it’s played live or at home, let the JTM’s all-valve, era-defining sound steal the show.
Celestion G12M-65 Creamback
With the G12M-65 Creamback, you can achieve the timeless G12M tone while still accommodating higher power levels. This speaker is an excellent choice for modern players that desire a vintage sound. The enhanced power handling brings a rich low end, complementing the warm mid-range, crunchy upper-mids and refined highs.
Additional information
| Weight | 20.8 kg |
|---|---|
| Dimensions | 67.4 × 33.4 × 54.9 cm |
| Type: | Tube |
| Number of Channels: | 2 |
| Output Power: | 20W (5W) |
| Speaker Size: | 1 x 12″ Celestion G12M-65 Creamback |
| Preamp Tubes: | 2 x 12AX7 (preamp), 1 x 12AX7 (phase) |
| Power Tubes: | 2 x 5881 |
| EQ: | 3-band EQ, Presence Control |
| Inputs: | 2 x 1/4″ (High Treble), 2 x 1/4″ (Normal) |
| Outputs: | 5 x 1/4″ (4/8/16 ohms), 1 x 1/4″ (DI out) |
| Effects Loop: | Yes (on/off switch) |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall JVM210C – 100 Watt All Valve 2×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speaker
Marshall JVM215C – 50 Watt All Valve 1×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speakers
Related products
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1960AHW – Handwired 1960A Cabinet
- A brilliantly retro 4 x 12-in. guitar cabinet handwired in Marshall's UK factory
- The perfect companion for your Marshall 1959HW Super Lead amp head
- Built to vintage specs with a period-correct black Tolex with an eye-catching salt 'n' pepper grille
- Celestion G12H-30 speakers yield aggressive lows, muscular low mids, incendiary upper mids, and ice-cool top end
- Tackles thunderous power chords and liquid lead lines with equal aplomb
- Easily cuts through a mix, even in the midst of extra-loud stage volumes
- Reinforced side handles and casters provide easy transport
Marshall 1960AX – 4×12″ 100W Classic Angled Cabinet
- 4 x 12" vintage style speaker cabinet
- 25-watt Celestion G12-25 Greenback speakers
- 1970s checkered grille cloth and gold piping
- Small size white logo
- Black levant vinyl/white beading on cabinet
- Finger-locked joints are used on all 4 corners of the frame
- Castors are standard and can be removed if desired
- 100-watt power capacity
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall JVM205H – 50 Watt All Valve 2 Channel Head
- 50-watt all-tube amp head
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has three footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
