Marshall SC20C – 20W Valve amp combo
4,396.00 Excl. VAT
- Packs the incendiary tone of a JCM800 2203 into a 20-watt combo
- 10″ Celestion V-Type speaker serves up classic British tone
- Conjures up everything from rich and full cleans to high-gain mayhem
- Separate Preamp Volume and Master Volume controls allow for high-gain tones at low volumes
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5 watts
- DI output for easy recording or routing to a PA
Available on backorder
Description
Power reduction from 20W to 5W at the flick of a switch
Pick your power. Choose between 20W and 5W power output at the flick of a switch. Transition perfectly between your rehearsal room, home and back again.
Inspired by the original JCM800
A portable replica of the classic JCM800 which was originally introduced in the 80s. It offered more gain, taking you from clean to barking overdrive and soaring solos. With a roar rivalling that of the king of the jungle, the original is played by some of the greatest rock musicians of all time, so you’re sure to get amazing tones out of its smaller brother.
Celestion VT-Junior
Similar to its larger V-Type counterpart, the VT-Junior speaker provides a harmonious and well-balanced sound. Its compact 10-inch size delivers a powerful low mid punch, a sparkling high end as well as extreme responsiveness that allows you to stay engaged with your music.
Additional information
| Weight | 18 kg |
|---|---|
| Dimensions | 67.4 × 33.4 × 54.9 cm |
| Type: | Tube |
| Number of Channels: | Single channel |
| Output Power: | 20W (5W setting) |
| Speaker Size: | 1 x 10″ Celestion V-type Speaker |
| Preamp Tubes: | 3 x 12AX7 |
| Power Tubes: | 2 x EL34 |
| EQ: | 3-band EQ |
| Inputs: | 2 x 1/4″ (high, low) |
| Outputs: | 1 x 1/4″ (16 ohm internal), 2 x 1/4″ (single 8 ohm or 2 x 16 ohm), 2 x /14″ (single 4 ohm or 2 x 8 ohm), 1 x 1/4″ (DI out) |
| Effects Loop: | Yes |
| Bias Type: | Cathode Biased |
| Construction Material: | Black Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall JTM45 2245 – 30W Valve Head
- Accurate reissue of the legendary JTM45 amplifier, a '60s rock legend
- 30 watts of power, perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Sounds great with gain boost pedal in front of it
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall JVM210C – 100 Watt All Valve 2×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speaker
Marshall JVM215C – 50 Watt All Valve 1×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speakers
Related products
Marshall 1960AX – 4×12″ 100W Classic Angled Cabinet
- 4 x 12" vintage style speaker cabinet
- 25-watt Celestion G12-25 Greenback speakers
- 1970s checkered grille cloth and gold piping
- Small size white logo
- Black levant vinyl/white beading on cabinet
- Finger-locked joints are used on all 4 corners of the frame
- Castors are standard and can be removed if desired
- 100-watt power capacity
Marshall CODE50 – 50W MST Guitar Combo
- 50 watts with a 12-inch speaker — good for club gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for a tight 1 x 12-inch to a beefy 4 x 12-inch
- 24 digital effects to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall JVM210H – 100 Watt All Valve 2 Channel Head
- 100 watts
- All-tube design includes 5 x 12AX7s and 4 x EL34s
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Marshall JVM410C – 100 Watt All Valve 2×12″ 4 Channel Combo
- 100-watt 2 x 12" Combo
- Marshall G-12 Vintage and Celestion 12" speakers
- 5 x ECC83 (12AX7s) and 4 x EL34s
- 4 independent channels
- 3 footswitchable modes
- Studio quality digital reverb
- 2 footswitchable master volumes
- 2 FX loops - series/parallel
- Emulated line-out
- 6-way footswitch with memory
- Channel switching via MIDI
Marshall JVMC212 – 140W 2×12″ Extension Cabinet
- The perfect extension cab for your Marshall JVM combo
- Robust housing with optimum resonance
- Sturdy birch plywood construction; half-open back
- 12" Celestion Vintage 30 speakers and 12" Celestion Heritage speakers (both 8 ohms)
- 140-watt capacity
- Identical to the TSLC212 Cabinet from the JCM2000 series
Marshall PEDL-90011 – 1 Way Latching Pedal – Channel change
- Simple, no-frills pedal with a single latching switch for channel selection.
- A bright, built-in LED indicates which channel is active
- Designed to work exclusively with the Marshall DSL1H and DSL1C from the 2018 DSL1 series.
- Built with a "road-ready metal" casing
- Pedal does not require a battery or an external power source.
- Draws power for the LED directly from the amplifier via the attached cable.
- It features a fixed, hard-wired cable with a 1/4-inch jack
Marshall SC20H – 20W Valve amp head Studio Classic – JCM 800 2203
- Packs the incendiary tone of a JCM800 2203 into a 20-watt head
- Conjures up everything from rich and full cleans to high-gain mayhem
- Separate Preamp Volume and Master Volume controls allow for high-gain tones at low volumes
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5 watts
- DI output for easy recording or routing to a PA