Marshall PEDL-90008 – 4-way stomp pedal for MGs
195.00 Excl. VAT
- A 4-way momentary footswitch specifically designed for the MG15FX, MG30FX, MG50FX, MG101HFX, MG101FX and MG102FX.
- This footswitch can be fully programmed by the amp.
- It includes built-in indicator lights that will show you whether the switch is activated or not.
In stock
Description
Authentic Marshall Footswitch!
The Marshall PEDL-90008 is a 4-way momentary footswitch designed for specific Marshall MG Series amplifiers, providing remote control over channels, effects, and a built-in tuner. It uses a standard guitar cable for connection and is powered by the amplifier itself, requiring no batteries.
Key Features and Functionality
Programmable Controls
Each of the four buttons can be assigned to different functions or store complete presets, allowing users to customize their setup.
Functions
It provides control over Clean/Crunch and Overdrive channels, effects on/off, and tap tempo for delay/modulation effects.
Built-in Tuner
A chromatic tuner is integrated into the pedal, accessible via a footswitch, which also mutes the amplifier during tuning.
Visual Indicators
An LED panel and digital display show the current channel, effect status, and assist with fine-tuning notes in tuner mode.
Durable Build
It features a sturdy metal/hard plastic chassis designed to withstand regular use.
Connectivity
It connects to the amplifier using a standard 6.3mm (1/4") mono guitar cable, which is easy to replace if damaged.
Compatible Amplifiers
- MG15FX
- MG30FX
- MG50FX
- MG101FX
- MG102FX
- MG100HFX
Additional information
| Weight | 1.02 kg |
|---|---|
| Dimensions | 34 × 60 × 19 cm |
| Type: | 4-way momentary footswitch |
| Number of Buttons/Switches: | 4 |
| Display: | LED panel for status information, and a digital display that indicates the selected footswitch and tuner note. |
| Connectivity: | Uses a standard mono guitar cable for connection; the cable is not included. |
| Power: | Receives power from the connected amplifier. |
| Programmability: | Yes |
| Compatibility: | MG15FX, MG30FX and MG50FX |
You may also like…
Marshall CODE25 – 25W MST Guitar Combo
- 25 watts with a 10" speaker - good for small gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for tight a 1 x 12" to a beefy 4 x 12"
- 24 digital FX to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall CODE50 – 50W MST Guitar Combo
- 50 watts with a 12-inch speaker — good for club gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for a tight 1 x 12-inch to a beefy 4 x 12-inch
- 24 digital effects to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall DSL20CR – 20W 1×12 Combo with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- High and low power modes allow you to dial in appropriate volume for any setting
- Line output with Softube's accurate emulation of a Marshall 1960 cab
- Highly effective Resonance control replaces the original's fixed deep switch
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Rear-panel series effects loop
- Included 2-way footswitch for channel switching and FX loop on/off
Marshall DSL40CR – 40W 1×12 Combo with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- Each channel features 2 modes — Clean/Crunch and OD1/OD2, respectively
- High and low power modes allow you to dial in appropriate volume for any setting
- Line output with Softube cabinet emulation faithfully re-creates the sound of a Marshall 1960 Lead cabinet
- Highly effective Resonance control tailors your low-end response
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Bypassable rear-panel series effects loop
- Included 2-way footswitch for channel switching and reverb on/off
Related products
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1960AX – 4×12″ 100W Classic Angled Cabinet
- 4 x 12" vintage style speaker cabinet
- 25-watt Celestion G12-25 Greenback speakers
- 1970s checkered grille cloth and gold piping
- Small size white logo
- Black levant vinyl/white beading on cabinet
- Finger-locked joints are used on all 4 corners of the frame
- Castors are standard and can be removed if desired
- 100-watt power capacity
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall DSL1HR – 1W Valve Head with Reverb
- 2-ch amp head capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series FX loop accepts your favorite stompboxes with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- Record-ready line output utilizes Softube's accurate sound emulation of a Marshall 1960 cab
Marshall PEDL-90011 – 1 Way Latching Pedal – Channel change
- Simple, no-frills pedal with a single latching switch for channel selection.
- A bright, built-in LED indicates which channel is active
- Designed to work exclusively with the Marshall DSL1H and DSL1C from the 2018 DSL1 series.
- Built with a "road-ready metal" casing
- Pedal does not require a battery or an external power source.
- Draws power for the LED directly from the amplifier via the attached cable.
- It features a fixed, hard-wired cable with a 1/4-inch jack