Marshall PEDL-10034 – Vintage footpedal
295.00 Excl. VAT
Available on backorder
Description
Vintage footpedal
The Marshall PEDL-10034 is a single-button, latching footswitch specifically designed for use with the Marshall 1974X amplifier to control its tremolo circuit.
Key Features and Functionality
Function
This passive, single-button latching footswitch is used to engage or disengage the tremolo effect on compatible amplifiers.
Compatibility
It is designed exclusively for the hand-wired Marshall 1974X amplifier combo, but is also compatible with the 1973X, 1958X, 2525C Mini Jubilee, and 2555X Silver Jubilee models. It is not a universal footswitch.
Connectivity
The pedal includes a fixed cable terminated with a 6.3mm (1/4") mono TS jack connector, so no separate power supply or batteries are needed.
Design
It features a durable, vintage-inspired metal enclosure with a grey hammerite finish, styled to match the aesthetic of the original 1974X amplifier.
Additional information
| Weight | 0.42 kg |
|---|---|
| Dimensions | 13.4 × 14.4 × 7.2 cm |
| Switch Type: | Latching |
| Number of Buttons/Switches: | 1 |
| Connection: | 6.3mm (1/4″) mono TS jack |
| Cable: | Fixed/hard-wired cable included |
| Power Supply: | Passive |
| Color: | Silver/Chrome finish |
| Material: | Durable metal enclosure with vintage aesthetic |
| Compatibility: | Marshall 1974X, 1958X, 1973X amplifiers |
You may also like…
Marshall CODE25 – 25W MST Guitar Combo
- 25 watts with a 10" speaker - good for small gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for tight a 1 x 12" to a beefy 4 x 12"
- 24 digital FX to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall CODE50 – 50W MST Guitar Combo
- 50 watts with a 12-inch speaker — good for club gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for a tight 1 x 12-inch to a beefy 4 x 12-inch
- 24 digital effects to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall DSL20CR – 20W 1×12 Combo with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- High and low power modes allow you to dial in appropriate volume for any setting
- Line output with Softube's accurate emulation of a Marshall 1960 cab
- Highly effective Resonance control replaces the original's fixed deep switch
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Rear-panel series effects loop
- Included 2-way footswitch for channel switching and FX loop on/off
Marshall DSL40CR – 40W 1×12 Combo with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- Each channel features 2 modes — Clean/Crunch and OD1/OD2, respectively
- High and low power modes allow you to dial in appropriate volume for any setting
- Line output with Softube cabinet emulation faithfully re-creates the sound of a Marshall 1960 Lead cabinet
- Highly effective Resonance control tailors your low-end response
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Bypassable rear-panel series effects loop
- Included 2-way footswitch for channel switching and reverb on/off
Related products
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1960AHW – Handwired 1960A Cabinet
- A brilliantly retro 4 x 12-in. guitar cabinet handwired in Marshall's UK factory
- The perfect companion for your Marshall 1959HW Super Lead amp head
- Built to vintage specs with a period-correct black Tolex with an eye-catching salt 'n' pepper grille
- Celestion G12H-30 speakers yield aggressive lows, muscular low mids, incendiary upper mids, and ice-cool top end
- Tackles thunderous power chords and liquid lead lines with equal aplomb
- Easily cuts through a mix, even in the midst of extra-loud stage volumes
- Reinforced side handles and casters provide easy transport
Marshall 1960AV – 280W 4×12″ Switchable Mono / Stereo Angled Cabinet
- 280W, closed-back, 4 x 12-inch speaker cabinet
- Packs '80s-era sonic characteristics into a '60s-style enclosure
- Marshall G12 Vintage by Celestion speakers yield loads of low-end thump and high-end sizzle
- 16/4Ω mono, 8Ω stereo operation
- Angled design produces a brighter sound than a straight cabinet
- Features robust birch construction
- Includes casters for easier transport
Marshall DSL1HR – 1W Valve Head with Reverb
- 2-ch amp head capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series FX loop accepts your favorite stompboxes with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- Record-ready line output utilizes Softube's accurate sound emulation of a Marshall 1960 cab
