Marshall ORI50C – 50w All Valve Amp Combo
2,895.00 Excl. VAT
- Packed with 3 ECC83 preamp tubes and 2 EL34 power tubes
- 12″ Celestion Midnight 60 speaker provides classic British tone
- Separate Gain and Master controls for dialing in the right amount of crunch
- Presence knob and 3-band EQ for shaping your tone
- Unique Tilt control blends bright and normal sounds
- Switchable Low/Mid/High power enables high-output sounds at any volume
- Built-in FX loop makes integrating your pedalboard easy
- Footswitchable gain boost for adding extra punch to your solos
Available on backorder
A No-frills Gateway to Classic Marshall Tone
Packed with a generous complement of tubes, the Origin ORI50C exhibits vintage-inspired Marshall tone. This amp is powerful in its simplicity. Dial in the Gain and Master controls to get the right amount of crunch, then shape your tone with the Presence knob and the 3-band EQ. A unique Tilt control blends bright and normal sounds, while switchable power enables high-output sounds at any volume. A built-in FX loop makes integrating your pedalboard a breeze. There’s even a footswitchable gain boost for adding extra punch to your solos. The Origin ORI50C is a no-frills gateway to classic Marshall tone.
Marshall Origin Series | Official Demo
From the music store to stages everywhere
Jim Marshall didn’t start out building great amps. In fact, his entry into the amp world came about in part because the drummers that visited his music shop for equipment and lessons often brought along their guitar players. Conversations about their amplification needs led to the birth of a line of amps that would eventually change the sound of music. From those first humble creations to Pete Townshend’s first monster full stacks; from the mid-’60s combos to Hendrix to backlines of multiple Marshall rigs, there’s a reason why so many guitarists swear by Marshall amps. Try one out and see for yourself!
| Weight | 24.12 kg |
|---|---|
| Dimensions | 70.2 × 36.8 × 63 cm |
| Type: | Tube |
| Number of Channels: | 1 |
| Output Power: | 50W (10W/5W power settings) |
| Preamp Tubes: | 3 x ECC83 |
| Power Tubes: | 2 x EL34 |
| EQ: | 3-band EQ, Tilt control |
| Inputs: | 1 x 1/4″ (Instrument) |
| Outputs: | 1 x 1/4″ (internal speaker 16 ohm), 2 x 1/4″ (2 x 16 ohm / single 8 ohm), 1 x 1/4″ (DI out) |
| Effects Loop: | Yes |
| Footswitch I/O: | 1 x 1/4″ (gain boost, effects loop) |
| Footswitch Included: | Yes, 2-button footswitch |
| Bias Type: | Adjustable Fixed |
| Construction Material: | Black Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall JVM205C – 50 Watt All Valve 2×12″ 2 Channel Combo
Marshall JVM215C – 50 Watt All Valve 1×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speakers
Marshall JVM410C – 100 Watt All Valve 2×12″ 4 Channel Combo
- 100-watt 2 x 12" Combo
- Marshall G-12 Vintage and Celestion 12" speakers
- 5 x ECC83 (12AX7s) and 4 x EL34s
- 4 independent channels
- 3 footswitchable modes
- Studio quality digital reverb
- 2 footswitchable master volumes
- 2 FX loops - series/parallel
- Emulated line-out
- 6-way footswitch with memory
- Channel switching via MIDI
Related products
Marshall 1922 – 150W 2×12″ Mono / 75W + 75W Stereo Cabinet
Marshall 1960A – 300W 4×12″ Switchable Mono / Stereo Angled Cabinet
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall CODE50 – 50W MST Guitar Combo
- 50 watts with a 12-inch speaker — good for club gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for a tight 1 x 12-inch to a beefy 4 x 12-inch
- 24 digital effects to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall DSL1HR – 1W Valve Head with Reverb
- 2-ch amp head capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series FX loop accepts your favorite stompboxes with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- Record-ready line output utilizes Softube's accurate sound emulation of a Marshall 1960 cab
Marshall JTM45 2245 – 30W Valve Head
- Accurate reissue of the legendary JTM45 amplifier, a '60s rock legend
- 30 watts of power, perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Sounds great with gain boost pedal in front of it
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall JVM205H – 50 Watt All Valve 2 Channel Head
- 50-watt all-tube amp head
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has three footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Marshall JVM210C – 100 Watt All Valve 2×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speaker
