Marshall ORI412A – 240W 4×12 Angled Cabinet
1,866.00 Excl. VAT
- 240-watt, 4 x 12″ angled extension cab
- Voiced especially for Origin series amplifiers
- Angled design offers incredible tone and projection
- Closed-back design delivers tight low-end response
- 4 Celestion G12E-60 speakers churn out defined, controlled lows and punchy, aggressive mids
- Sleek vintage styling is guaranteed to turn heads
Available on backorder
Description
The Perfect Partner for Your Marshall Origin Amp
Plug your Marshall Origin series amplifier into the ORI412A and prepare to be amazed — the sound of this 4 x 12″ angled extension cabinet will blow you away. Experience defined, controlled lows and punchy, aggressive mids thanks to four Celestion G12E-60 speakers. Benefit from 240 watts of power handling. Beyond that, this extension cabinet’s sleek vintage styling is guaranteed to turn a few heads. Get an ORI412A, and your Origin amplifier will achieve its full potential.
Additional information
| Weight | 33.88 kg |
|---|---|
| Dimensions | 80 × 40 × 82.4 cm |
| Type: | 4 x 12″ |
| Powered: | No |
| Speakers: | Celestion G12E-60 |
| Power Handling: | 240W |
| Impedance: | 16 ohms |
| Mono/Stereo: | Mono |
| Cabinet Type: | Slant |
| Open/Closed Back: | Closed |
| Inputs: | 1 x 1/4″ |
| Construction Material: | Black Tolex covered MDF |
You may also like…
Marshall 1960AX – 4×12″ 100W Classic Angled Cabinet
- 4 x 12" vintage style speaker cabinet
- 25-watt Celestion G12-25 Greenback speakers
- 1970s checkered grille cloth and gold piping
- Small size white logo
- Black levant vinyl/white beading on cabinet
- Finger-locked joints are used on all 4 corners of the frame
- Castors are standard and can be removed if desired
- 100-watt power capacity
Marshall 1960BV – 280W 4×12″ Switchable Mono / Stereo Base Cabinet
- 280W, closed-back, 4 x 12-inch speaker cabinet
- Packs '80s-era sonic characteristics into a '60s-style enclosure
- Marshall G12 Vintage by Celestion speakers yield loads of low-end thump and high-end sizzle
- 16/4Ω mono, 8Ω stereo operation
- Straight design producers a thicker sound than an angled cabinet
- Features robust birch construction
- Includes casters for easier transport
Related products
Marshall 1936V – 140W 2×12″ Mono / 70W + 70W Stereo Cabinet
- 2 x 12" speaker cab that delivers massive Marshall tone and epic volume
- 2 x Celestion G12 Vintage speakers provide punchy lows, smooth mids, and creamy highs
- Finger-jointed plywood gives you excellent durability and projection
- Configurable either in mono or split stereo configurations for added versatility
- Decked out with a black grille cloth, white piping, and black elephant grain vinyl
Marshall 1960AV – 280W 4×12″ Switchable Mono / Stereo Angled Cabinet
- 280W, closed-back, 4 x 12-inch speaker cabinet
- Packs '80s-era sonic characteristics into a '60s-style enclosure
- Marshall G12 Vintage by Celestion speakers yield loads of low-end thump and high-end sizzle
- 16/4Ω mono, 8Ω stereo operation
- Angled design produces a brighter sound than a straight cabinet
- Features robust birch construction
- Includes casters for easier transport
Marshall 1960TV – 4×12″ 100W Original Tall Vintage Cabinet
- Extra-tall cabinet
- 25-watt Celestion Greenback speakers
- Grey EC grille cloth and gold piping
- Small size white logo with gold foil
- Black levant vinyl/gold beading on cabinet
- Finger-locked joints on all 4 corners of the cabinet's frame to ensure a tight fit between sides, make the cabinet less susceptible to damage, and allow the entire cabinet to resonate sympathetically with the sound from the speakers
- Castors are standard and can be removed if desired
- 100 watts at 16 ohms
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall DSL1HR – 1W Valve Head with Reverb
- 2-ch amp head capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series FX loop accepts your favorite stompboxes with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- Record-ready line output utilizes Softube's accurate sound emulation of a Marshall 1960 cab
Marshall JVM205H – 50 Watt All Valve 2 Channel Head
- 50-watt all-tube amp head
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has three footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos