Marshall JVM215C – 50 Watt All Valve 1×12″ 2 Channel Combo
7,330.00 Excl. VAT
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels – clean/crunch and overdrive
- Each channel has 3 footswitchable modes – green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops – 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speakers
Available on backorder
Description
Two channels with dedicated volume controls
The JVM215 Combo brings you to the front of the stage. It has a master volume for each channel which means you can get an instant volume boost and create explosive solo moments.
Silent recording mode
The JVM215 Combo has recording capabilities as well as a standby mode for silent recording. All you have to do to capture the perfect take is connect your amplifier’s line out to a recording device and keep the standby switch turned off. This feature allows you to transport the amp from your bedroom to the studio with ease. After all that practise, you’ll be playing live shows in no time.
Store your settings
With the programmable footswitch (included), you can recall your mode, master and reverb settings. This gives you power and flexibility when and where you need it.
Additional information
| Weight | 29.38 kg |
|---|---|
| Dimensions | 83.2 × 31.6 × 56.2 cm |
| Type: | Tube |
| Number of Channels: | 2 |
| Output Power: | 50W |
| Speaker Size: | 1 x 12″ |
| Preamp Tubes: | 4 x 12AX7 (preamp), 1 x 12AX7 (phase invert) |
| Power Tubes: | 2 x EL34 |
| EQ: | 3-band |
| Inputs: | 1 x Instrument |
| Outputs: | 5 x Speaker, 1 x XLR (Emulated Line) |
| Effects Loop: | Yes |
| MIDI I/O: | In/Thru |
| Footswitch I/O: | 1 x 1/4″ (programmable) |
| Footswitch Included: | Yes, 4-button footswitch |
| Bias Type: | Adjustable Fixed |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall JVMC212 – 140W 2×12″ Extension Cabinet
- The perfect extension cab for your Marshall JVM combo
- Robust housing with optimum resonance
- Sturdy birch plywood construction; half-open back
- 12" Celestion Vintage 30 speakers and 12" Celestion Heritage speakers (both 8 ohms)
- 140-watt capacity
- Identical to the TSLC212 Cabinet from the JCM2000 series
Related products
Marshall 1960AX – 4×12″ 100W Classic Angled Cabinet
- 4 x 12" vintage style speaker cabinet
- 25-watt Celestion G12-25 Greenback speakers
- 1970s checkered grille cloth and gold piping
- Small size white logo
- Black levant vinyl/white beading on cabinet
- Finger-locked joints are used on all 4 corners of the frame
- Castors are standard and can be removed if desired
- 100-watt power capacity
Marshall 1960TV – 4×12″ 100W Original Tall Vintage Cabinet
- Extra-tall cabinet
- 25-watt Celestion Greenback speakers
- Grey EC grille cloth and gold piping
- Small size white logo with gold foil
- Black levant vinyl/gold beading on cabinet
- Finger-locked joints on all 4 corners of the cabinet's frame to ensure a tight fit between sides, make the cabinet less susceptible to damage, and allow the entire cabinet to resonate sympathetically with the sound from the speakers
- Castors are standard and can be removed if desired
- 100 watts at 16 ohms
Marshall DSL1HR – 1W Valve Head with Reverb
- 2-ch amp head capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series FX loop accepts your favorite stompboxes with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- Record-ready line output utilizes Softube's accurate sound emulation of a Marshall 1960 cab
Marshall JVM205H – 50 Watt All Valve 2 Channel Head
- 50-watt all-tube amp head
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has three footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Marshall JVM210C – 100 Watt All Valve 2×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speaker
Marshall JVM210H – 100 Watt All Valve 2 Channel Head
- 100 watts
- All-tube design includes 5 x 12AX7s and 4 x EL34s
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Marshall SC20C – 20W Valve amp combo
- Packs the incendiary tone of a JCM800 2203 into a 20-watt combo
- 10" Celestion V-Type speaker serves up classic British tone
- Conjures up everything from rich and full cleans to high-gain mayhem
- Separate Preamp Volume and Master Volume controls allow for high-gain tones at low volumes
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5 watts
- DI output for easy recording or routing to a PA