Marshall JTM45 2245 – 30W Valve Head
6,230.00 Excl. VAT
- Accurate reissue of the legendary JTM45 amplifier, a ’60s rock legend
- 30 watts of power, perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Sounds great with gain boost pedal in front of it
- Straightforward control set is all you need to craft a range of vintage ’60s guitar tones
Available on backorder
Description
DELIVERS VINTAGE TONES
Unlock the legendary power of Marshall’s iconic sound with the JTM45 2245. At lower volume levels, the JTM45 can deliver clean and warm tones. The clean sound is characterised by a smooth, rich, and balanced response. As you turn up the volume, the JTM45 begins to exhibit naturally overdriven valve tones.
It is this tone that is a key component of the amp’s sound and is prized for its dynamic and responsive feel. Immerse yourself in the unmistakable tones that have shaped the landscape of rock music for decades.
ADD IN YOUR OWN FX
Dive into the enchanting blend of the JTM45’s clean and warm tones harmonising with a variety of effects pedals. The power to shape a distinctive and memorable sound is in your hands.
FOUR LOUDNESS INPUTS
Using the four loudness inputs and two loudness options, you can mix your sound together to generate a loud blend of crunch and clean. If there was ever a time to get loud, it’s now.
Additional information
| Weight | 17.86 kg |
|---|---|
| Dimensions | 82 × 27.6 × 42.4 cm |
| Type: | Tube |
| Number of Channels: | 2 |
| Output Power: | 30W |
| Preamp Tubes: | 2 x 12AX7 (preamp), 1 x 12AX7 (phase invert) |
| Power Tubes: | 2 x 5881 (power), 1 x GZ34 (rectifier) |
| EQ: | 3-band EQ |
| Inputs: | 2 x 1/4″ (ch 1), 2 x 1/4″ (ch 2) |
| Outputs: | 2 x 1/4″ (4/8/16 ohms) |
| Effects Loop: | No |
| Bias Type: | Adjustable Fixed |
| Construction Material: | Black Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1960AX – 4×12″ 100W Classic Angled Cabinet
- 4 x 12" vintage style speaker cabinet
- 25-watt Celestion G12-25 Greenback speakers
- 1970s checkered grille cloth and gold piping
- Small size white logo
- Black levant vinyl/white beading on cabinet
- Finger-locked joints are used on all 4 corners of the frame
- Castors are standard and can be removed if desired
- 100-watt power capacity
Related products
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall CODE50 – 50W MST Guitar Combo
- 50 watts with a 12-inch speaker — good for club gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for a tight 1 x 12-inch to a beefy 4 x 12-inch
- 24 digital effects to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall DSL1HR – 1W Valve Head with Reverb
- 2-ch amp head capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series FX loop accepts your favorite stompboxes with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- Record-ready line output utilizes Softube's accurate sound emulation of a Marshall 1960 cab
Marshall JVM210C – 100 Watt All Valve 2×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speaker
Marshall SC20H – 20W Valve amp head Studio Classic – JCM 800 2203
- Packs the incendiary tone of a JCM800 2203 into a 20-watt head
- Conjures up everything from rich and full cleans to high-gain mayhem
- Separate Preamp Volume and Master Volume controls allow for high-gain tones at low volumes
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5 watts
- DI output for easy recording or routing to a PA