Marshall DSL1HR – 1W Valve Head with Reverb
1,025.00 Excl. VAT
- 2-ch amp head capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series FX loop accepts your favorite stompboxes with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- Record-ready line output utilizes Softube’s accurate sound emulation of a Marshall 1960 cab
Available on backorder
Description
Power reduction from 1W to 0.1W at the flick of a switch
Take control of your playing volume. Select between 1W and a more subdued 0.1W power output with a simple flick of a switch. Perfect for effortlessly moving between the rehearsal space and your home.
Compact and portable
This instantly recognisable, classic Marshall tone is driven by two ECC83 preamp valves, an ECC83 phase splitter and four EL34 valves in the power amp.
Two gain channels
Unleash your inner rockstar with the DSL1H. Equipped with two distinct gain channels — ultra gain and classic gain — this amplifier offers enhanced versatility in sculpting your tone. The dual gain channels typically exhibit different levels of gain and distortion. This enables seamless transitions between cleaner tones and more intense overdriven or distorted sounds without the need for significant adjustments. Embark on a sonic journey by effortlessly switching from ultra-clean tones to powerful distortion and exploring everything in between.
Additional information
| Weight | 7.82 kg |
|---|---|
| Dimensions | 45.2 × 29.8 × 32.4 cm |
| Type: | Tube |
| Number of Channels: | 2 |
| Output Power: | 1W (0.1W power setting) |
| Preamp Tubes: | 2 x ECC83 |
| Power Tubes: | 1 x ECC82 |
| Reverb: | Yes |
| EQ: | 3-band EQ, Tone Shift |
| Inputs: | 1 x 1/4″ (instrument), 1 x 1/8″ (aux in) |
| Outputs: | 1 x 1/8″ (Softube emulated out), 1 x 1/4″ (16 ohms) |
| Effects Loop: | Yes |
| Footswitch I/O: | 1 x 1/4″ (channel) |
| Footswitch Included: | Yes |
| Bias Type: | Cathode Biased |
| Construction Material: | Black Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall DSL20HR – 20W Valve Head with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- High and low power modes allow you to dial in the appropriate volume for any setting
- Line output with Softube's accurate emulation of a Marshall 1960 cab
- Highly effective Resonance control lets you dial in your preferred amount of low-end girth
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Rear-panel series effects loop
- Included 2-way footswitch for channel switching and FX loop on/off
Marshall DSL5CR – 5W Valve 1×10 Combo with Reverb
- Capable of conjuring any classic Marshall sound — past or present
- 2 channels — Classic Gain and Ultra Gain
- High and low power modes allow you to dial in appropriate volume for any setting
- Line output with Softube's accurate emulation of a Marshall 1960 cab
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb
- Rear-panel series effects loop
Marshall ORI20H – 20W All Valve Amp Head
- Packed with 3 ECC83 preamp tubes and 2 EL34 power tubes
- Separate Gain and Master controls for dialing in the right amount of crunch
- Presence knob and 3-band EQ for shaping your tone
- Unique Tilt control blends bright and normal sounds
- Switchable Low/Mid/High power enables high-output sounds at any volume
- Built-in FX loop makes integrating your pedalboard easy
- Footswitchable gain boost for adding extra punch to your solos
Marshall SV20H – 20W Valve amp head – JMP 1959 SLP
- Packs the legendary tone of a 1959 Super Lead into a 20W head
- Conjures up saturated blues grit and biting leads — the coveted Plexi sound
- 4 separate inputs for you to blend your sound, along with high- and low-sensitivity loudness knobs
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5W
- DI output for easy recording or routing to a PA
Related products
Marshall 1960AHW – Handwired 1960A Cabinet
- A brilliantly retro 4 x 12-in. guitar cabinet handwired in Marshall's UK factory
- The perfect companion for your Marshall 1959HW Super Lead amp head
- Built to vintage specs with a period-correct black Tolex with an eye-catching salt 'n' pepper grille
- Celestion G12H-30 speakers yield aggressive lows, muscular low mids, incendiary upper mids, and ice-cool top end
- Tackles thunderous power chords and liquid lead lines with equal aplomb
- Easily cuts through a mix, even in the midst of extra-loud stage volumes
- Reinforced side handles and casters provide easy transport
Marshall 1960BHW – Handwired 1960B Cabinet
- A brilliantly retro 4 x 12-in. guitar cabinet handwired in Marshall's UK factory
- The perfect companion for your Marshall 1959HW Super Lead amp head
- Built to vintage specs with a period-correct black Tolex with an eye-catching salt 'n' pepper grille
- Celestion G12H-30 speakers yield aggressive lows, muscular low mids, incendiary upper mids, and ice-cool top end
- Tackles thunderous power chords and liquid lead lines with equal aplomb
- Easily cuts through a mix, even in the midst of extra-loud stage volumes
- Reinforced side handles and casters provide easy transport
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JTM45 2245 – 30W Valve Head
- Accurate reissue of the legendary JTM45 amplifier, a '60s rock legend
- 30 watts of power, perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Sounds great with gain boost pedal in front of it
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall JVM210H – 100 Watt All Valve 2 Channel Head
- 100 watts
- All-tube design includes 5 x 12AX7s and 4 x EL34s
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos