Marshall 1960A – 300W 4×12″ Switchable Mono / Stereo Angled Cabinet
3,296.00 Excl. VAT
- 300-watt, 4 x 12″ angled cabinet
- 4/16-ohm mono or 8-ohm stereo
- 4 x 75-watt G12T-75 speakers
- Black grille cloth and white piping
- Large white logo
- Black elephant grain vinyl
In stock
Legendary Marshall Muscle!
Nothing personifies the image of rock ‘n’ roll more completely than a wall of Marshall stacks. Though often imitated, nothing compares to the original. The 1960A is the angled version that features four G12T-75 speakers and is the perfect addition to your stage or recording rig! It’s ideal for players who appreciate clarity and quality.
The ultimate in flexibility
To ensure the ultimate in flexibility, the 1960A is switchable between mono (4 or 16 ohms) and stereo (8 ohms per side). The two mono impedance options provide extra amp matching capability while the cabinet’s stereo capability makes it ideal for rack systems which typically run in stereo.
Sonically superior
Marshall is the only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4 x 12″ cabs are indeed rock ‘n’ roll history in a stack!
Clear and true
The 1960A produces a loud, well-focused, and uncluttered sound with a tight, full low end and a crisp, clear top. It projects well across the guitar’s entire tonal range and its clarity makes it ideal for players who like using a fair amount of effects such as reverb, chorus, or delay as it doesn’t mask or muddy-up such FX. Its all-around versatility and relatively uncolored nature makes this one of Marshall’s best-selling cabs. It represents the sound of the guitar and head most accurately.
The Marshall 1960 cabinets are the best selling amp cabinets in the world. They are standard on stages everywhere for their sound and rugged construction. While not complicated electronically, the effects of their materials, construction, and speakers make the 1960s the choice of players everywhere and have made them the industry standard to this day.
Slightly brighter sound than a straight cab
1960A (angled) cabinets came about because Jim Marshall felt a head on a straight front cab just didn’t look designed. The sides and baffle of the cabinet feature an angled cut. This has both a cosmetic impact and a sonic one, because the top two 12″ speakers angle slightly upwards. It has more sonic or dispersion and is a little brighter-sounding than a straight cabinet.
Rugged and ready for the road
Roadworthiness is a vital prerequisite in the world of relentless touring. Luckily, as Marshall’s 40 years of cabinet building attest, Marshall cabinets are definitely built to stand the test of time! Their highly skilled craftsmen construct these 4 x 12″‘s from the finest materials available – 15mm birch plywood with precision comb joints, cotton-backed PVC covering, heavy-duty hardware, and the highest quality fittings. Weighing in at around 80 lbs., the JCM1960A is made of 15mm birch plywood (except for the back panel, which is medium density fiberboard) and built for tone, projection, and durability. The majority of cabinet construction is done by hand.
| Weight | 40.68 kg |
|---|---|
| Dimensions | 89.8 × 38.6 × 78 cm |
| Configuration: | 4 x 12″ |
| Powered: | No |
| Speakers: | Celestion G12T-75 |
| Power Handling: | 300W |
| Impedance: | 16 ohms/4 ohms (Mono), 8 ohms (Stereo) |
| Mono/Stereo: | Mono, Stereo |
| Cabinet Type: | Angled |
| Open/Closed Back: | Closed |
| Inputs: | 2 x 1/4″ |
| Construction Material: | Birch |
| Casters: | Yes |
You may also like…
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Related products
Marshall 1936V – 140W 2×12″ Mono / 70W + 70W Stereo Cabinet
- 2 x 12" speaker cab that delivers massive Marshall tone and epic volume
- 2 x Celestion G12 Vintage speakers provide punchy lows, smooth mids, and creamy highs
- Finger-jointed plywood gives you excellent durability and projection
- Configurable either in mono or split stereo configurations for added versatility
- Decked out with a black grille cloth, white piping, and black elephant grain vinyl
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JVM205H – 50 Watt All Valve 2 Channel Head
- 50-watt all-tube amp head
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has three footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Marshall PEDL-90011 – 1 Way Latching Pedal – Channel change
- Simple, no-frills pedal with a single latching switch for channel selection.
- A bright, built-in LED indicates which channel is active
- Designed to work exclusively with the Marshall DSL1H and DSL1C from the 2018 DSL1 series.
- Built with a "road-ready metal" casing
- Pedal does not require a battery or an external power source.
- Draws power for the LED directly from the amplifier via the attached cable.
- It features a fixed, hard-wired cable with a 1/4-inch jack