Dynaudio Core Sub Quad 9 inch Powered Studio Subwoofer
AED 13,495.000 Excl. VAT
- 1000W, 4 x 9″ Powered Subwoofer with Digital Input and DSP
- MSP+ (Magnesium Silicate Polymer) Hybrid Drive speakers
- Extremely accurate all the way down to 13.5Hz, well below the threshold of human hearing
- Highly efficient 1000W amplifier provides massive headroom
- Analog and AES3 digital inputs let you keep your signal digital right to the end
- 24-bit sampling rate and 192kHz resolution; dependent on input signal
- Core DSP optimizes imaging, balance, and bass extension
Available on backorder
Core Sub
The pinnacle of depth
The bass you want, and the accuracy you need
Core Sub is the ideal low-frequency extension for all speakers in the Core studio monitor range.
And when we say ‘low’, we mean it: it digs down with a flat response to 15Hz with a 6dB roll-off at 13.5Hz. There’s no meaningful low frequency that it won’t reproduce utterly faithfully.
Combine its handcrafted cabinet – made at our factory in Denmark – with four of our latest low-frequency drive units and 1000W of Pascal class-D amplification, and you get a subwoofer worthy of supporting the ground-breaking Core speakers.
Power? You’ve got it…
Core Sub uses the same DSP engine found in all the Core speakers, which means you can customise its response based on where it’s placed in the room. Its analogue and AES digital inputs let you calibrate it to work in any configuration from single-channel extension through 2.1-channel bass management and on to a theatrical LFE channel with the headroom to really nail it. Put your Cores in HP and you’re ready to go.
By using the same electronic platform as the rest of the Core products, we can ensure that the Sub’s behaviourand tonality are identical to the monitors – which means you get a totally integrated system, not a separate product just for bass.
It’s physically integrated, too. The design makes it possible to stack more units and combine it with other Core products. You can even use the VESA mount if you want to get it up on the wall. And it’s mix-and-match. For example: add two Subs per side with a Core 47 in between, regulate the dB and all is aligned – both physically and sonically. (Although we can’t promise your gold discs will stay in the same place on the wall.)
Finesse? That too…
Each Sub delivers 120dB, integrating perfectly with the power on offer from the rest of the Core series. It’s versatile, too – it’s digital and analogue, you can stack up to three together and on the top there are indentations to perfectly align any core monitors.
Core Sub has four 9in side-firing handmade Dynaudio hybrid woofers – Dynaudio’s new MSP+ Hybrid Drive units – which are made primarily from aluminium for stiffness, and are designed specifically for subwoofers. To counter ringing from the aluminium, it utilises a dual-action damping system that combines paper dampening on the back of the driver and Dynaudio’s own Magnesium Silicate Polymer material in a dampening cap on the front, ensuring the best performance. This driver is an improved version of the one you find in the highly acclaimed 18s woofer. The quest was simple; make the best bass driver possible.
Make no mistake: Core Sub isn’t just another boom-box. This is a highly accurate low-frequency delivery system.
Get ready to be moved. Literally.
Core Sub
Features
Designed, developed, tested and made in Denmark. All the drivers are hand-made at Dynaudio HQ, and each speaker is individually calibrated before it leaves our factory.
Uses the same DSP engine you’ll find in the rest of the Core range – so you can customise its response to its position in the room for seamless consistency and integration.
Use as many Subs as you need with your Core speakers – stack them in neat arrays or even mount them on walls. Core Sub aligns physically and electronically with your studio.
| Weight | 47.99 kg |
|---|---|
| Dimensions | 39.12 × 51.31 × 36.58 cm |
| Driver Type: |
Magnesium Silicate Polymer |
| Enclosure Type: |
Sealed |
| Input Types: |
1 x XLR, 1 x XLR (AES/EBU) |
| Maximum Peak SPL: |
120 dB SPL @ 1m |
| Output Types: |
1 x XLR |
| Powered: |
Yes |
| Speaker Size: |
9" |
| Total Power: |
1000W |
| USB: |
1 x Type B |
| Enclosure Material: |
MDF Double Front Baffle |
Related products
Dynaudio Acoustics 18S Dual 9.5 inch Powered Studio Subwoofer
- 500-watt state-of-the-art Class D amplifier module
- Dual 9in MSP+ Hybrid Drive long-throw woofers for accurate low-end frequency reproduction
- Advanced DSP with presets for a wide range of Dynaudio Pro studio monitors
- Preset speaker crossover filters
- Time alignment for adjusting according to position
- Three-band, built-in Parametric EQ
- Dual opposing driver design principle
Dynaudio Acoustics Core 47 3-Way Midfield Speaker Monitor – Right
- Active Studio Nearfield/Midfield/Main Monitor with Class D Pascal Tri-amplification
- 1" 150W Tweeter, 4" 500W Mid, 7" 500W Woofer, and Onboard DSP
- 500 watts each for the mid/woofer and 150 watts for the tweeter.
- Designed and made in Denmark using our world-class Jupiter measuring facility.
- Simple to use, powerful to listen to: it lets you tailor Core 47 for any listening environment.
- Front-loaded bass reflex cabinet for tight, focused lows and solid imaging
- Analog and AES3 digital inputs let you keep your signal digital right to the end
Dynaudio Acoustics Core 7 Professional 2-Way Reference Studio Monitor
- Active Studio Nearfield/Midfield/Main Monitor
- Class D Pascal Bi-amplification
- 1" tweeter, 7" mid/woofer
- Designed and made in Denmark using our world-class Jupiter measuring facility.
- Simple to use, powerful to listen to: it lets you tailor Core 7 for any listening environment.
- Front-loaded bass reflex cabinet
- 24-bit sampling rate and 192kHz resolution; dependent on input signal
Dynaudio Acoustics LYD 5 Nearfield 5″ Speaker Monitor Single – White Baffle
- 2-way Active Nearfield Monitor with 5" Low-frequency Driver
- Nearfield Monitor with 5" Woofer
- Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
- Bass extension to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
- Made in Denmark
Dynaudio Acoustics LYD 7 Nearfield 7″ Speaker Monitor Single – Black
- 100-watt Nearfield Monitor with 7" Woofer
- Soft-dome Tweeter
- Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Bass extension to extend or curtail the low end frequency response
- Sound balance to influence the overall response of the speaker
- Made in Denmark
Dynaudio LYD 48 3-way Powered Studio Monitor (Left) – Black
- 180W 3-way Studio Reference Monitor with 8" Woofer, 4" Midrange, and 1" Tweeter
- Designed in mirror-imaged pairs, sold singly
- Class D tri-amplified: LF 80W, MF 50W, HF 50W
- Provides astonishing clarity across the frequency spectrum
- Delivers neutral midrange response
- Advanced DSP lets you adjust low-frequency extension by +/-10Hz
- Position and Sound Balance controls