Manley
Manley Laboratories Inc. in recent years has expanded and thrived under EveAnna Manleys leadership. Our 11000 sq. ft. building houses our own machine shop printed circuit board manufacture audio transformer winding engraving and silk-screening facilities. All custom design RD assembly testing and quality control processes are performed with precision and pride at the Manley factory.
Featured Products
Manley Core Reference Tube Channel Strip
- ALL-TUBE preamplifier audio path using 1 x 12AX7 for gain and 1 x 6922 White Follower
- Balanced Transformer Coupled XLR Microphone Input Impedance: 1200 Ohms
- Balanced XLR Line Input Impedance: 10 kOhms
- Unbalanced 1/4" Direct Input Impedance: 10 Meg Ohm
- Hi-current drive Direct XLR output Impedance: 50 Ohms
- Silent conductive plastic INPUT attenuator
- Microphone preamp high pass filter starting at 120Hz with a 6dB/8va slope
Manley ELOP+ Dual-channel Tube Compressor/Limiter
- 10:1 Limiter and 3:1 Compressor ratios
- All-tube audio path uses 5751 (gain)
- 6922 (White Follower Output) dual triodes each channel
- Balanced Manley IRON® transformer-coupled XLR Inputs
- XLR impedance-balanced outputs
- BYPASS switches and AUTOMUTE with warm-up delay
- Large illuminated VU meters read Gain Reduction or Output levels
Manley Labs Reference Cardioid Tube Microphone
- All-tube Reference Cardioid Microphone
- Traditional Manley tube circuitry for that larger-than-life sound
- All-tube design with triode 12AT7
- Custom-wound output transformer with nickel laminations and humbucking bi-filar windings
- Switchable 10dB pad tames extra-hot sources
- Highest-quality components used throughout
- External PSU and 20' power supply cable with locking 6-pin connectors
Manley Labs Stereo Variable MU Limiter Compressor
-
Dual-channel Tube Limiter/Compressor with Stereo Link and True Variable Gain
- Manley input and output transformers with pure nickel laminations in mu-metal case
- Flat frequency response from 20Hz–25kHz
- Balanced Inputs and Outputs
- Fully differential all-tube circuitry using one 5751, 7044, and 12AL5 per channel
- Variable Gain vacuum tube (per channel): 5670
- Independently regulated B+ and Heater supplies
Manley Labs Stereo Variable MU Limiter Compressor Mastering Version
- Dual-channel Tube Limiter/Compressor
- T-Bar Mod, Detented Rotary Switches, and True Variable Gain
- Variable Gain vacuum tube (per channel): 2 x 6BA6 single pentodes
- Rotary switches with detented steps for precise channel matching and settings recall
- Switch steps built with 1% metal film resistors on sealed gold-contact Grayhill switches
- Manley input and output transformers with pure nickel laminations in mu-metal case
- Flat frequency response from 20Hz–25kHz
Manley SLAM 2-channel Tube Microphone Preamp & Limiter
- Input Tubes: 2 x 12AT7A NOS GE specially selected by Manley Labs for low noise and stable bias
- Output Tubes: 2 x 6414W NOS USA dual triodes
- I/O: Manley transformer-coupled, Balanced Inputs and Outputs
- Microphon epreamplifier: Selectable 48V phantom power and phase reverse
- Gain: 60dB max Microphone preamplifier, 43dB max DI, 20dB max Limiter Gain
- Input Impedance: 2000 ohms Micpre, 1Meg ohms DI
- FET Limiter: Attack: approx. 100S; Release: 10mS to 2Sec; Ratio: better than 20:1
- ELOP Limiter: Attack: approx. 10mS for 6dB GR; Release: 2.5 Sec; Ratio: 10:1
Manley VOXBOX Tube Channel Strip
- Channel Strip with Class A Microphone Preamplifier
- 5 Manley transformers, nickel laminated, mu-metal casings
- 2K ohm Mic input, high-current 48V Phantom power
- Mic preamp gain: 40–60dB
- hi-Z (100k ohm) DI instrument input
- Line and Insert inputs (balanced XLR, 1/4")
- Preamp and EQ outputs (balanced XLR, 1/4")
