Marshall ORI412A – 240W 4×12 Angled Cabinet
1,866.00 Excl. VAT
- 240-watt, 4 x 12″ angled extension cab
- Voiced especially for Origin series amplifiers
- Angled design offers incredible tone and projection
- Closed-back design delivers tight low-end response
- 4 Celestion G12E-60 speakers churn out defined, controlled lows and punchy, aggressive mids
- Sleek vintage styling is guaranteed to turn heads
Available on backorder
Description
The Perfect Partner for Your Marshall Origin Amp
Plug your Marshall Origin series amplifier into the ORI412A and prepare to be amazed — the sound of this 4 x 12″ angled extension cabinet will blow you away. Experience defined, controlled lows and punchy, aggressive mids thanks to four Celestion G12E-60 speakers. Benefit from 240 watts of power handling. Beyond that, this extension cabinet’s sleek vintage styling is guaranteed to turn a few heads. Get an ORI412A, and your Origin amplifier will achieve its full potential.
Additional information
| Weight | 33.88 kg |
|---|---|
| Dimensions | 80 × 40 × 82.4 cm |
| Type: | 4 x 12″ |
| Powered: | No |
| Speakers: | Celestion G12E-60 |
| Power Handling: | 240W |
| Impedance: | 16 ohms |
| Mono/Stereo: | Mono |
| Cabinet Type: | Slant |
| Open/Closed Back: | Closed |
| Inputs: | 1 x 1/4″ |
| Construction Material: | Black Tolex covered MDF |
You may also like…
Marshall 1960AX – 4×12″ 100W Classic Angled Cabinet
- 4 x 12" vintage style speaker cabinet
- 25-watt Celestion G12-25 Greenback speakers
- 1970s checkered grille cloth and gold piping
- Small size white logo
- Black levant vinyl/white beading on cabinet
- Finger-locked joints are used on all 4 corners of the frame
- Castors are standard and can be removed if desired
- 100-watt power capacity
Marshall 1960BV – 280W 4×12″ Switchable Mono / Stereo Base Cabinet
- 280W, closed-back, 4 x 12-inch speaker cabinet
- Packs '80s-era sonic characteristics into a '60s-style enclosure
- Marshall G12 Vintage by Celestion speakers yield loads of low-end thump and high-end sizzle
- 16/4Ω mono, 8Ω stereo operation
- Straight design producers a thicker sound than an angled cabinet
- Features robust birch construction
- Includes casters for easier transport
Related products
Marshall 1960BHW – Handwired 1960B Cabinet
- A brilliantly retro 4 x 12-in. guitar cabinet handwired in Marshall's UK factory
- The perfect companion for your Marshall 1959HW Super Lead amp head
- Built to vintage specs with a period-correct black Tolex with an eye-catching salt 'n' pepper grille
- Celestion G12H-30 speakers yield aggressive lows, muscular low mids, incendiary upper mids, and ice-cool top end
- Tackles thunderous power chords and liquid lead lines with equal aplomb
- Easily cuts through a mix, even in the midst of extra-loud stage volumes
- Reinforced side handles and casters provide easy transport
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall 1974CX – 1×12″ Extension Cabinet for 1974X
- 20W, open-back, 1 x 12-inch speaker cabinet
- Exquisitely handwired with old-school construction methods
- Built with reproduced components for maximum authenticity
- Celestion G12M-20 Greenback speaker has been "aged" for true-to-life vintage tone
- 15Ω mono operation
- Robust birch construction with finger-locked joints
- Boasts an eye-grabbing, Bluesbreaker-inspired look
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JVM210C – 100 Watt All Valve 2×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speaker
