Marshall ORI50H – 50W All Valve Amp Head
2,490.00 Excl. VAT
- Packed with 3 ECC83 preamp tubes and 2 EL34 power tubes
- Separate Gain and Master controls for dialing in the right amount of crunch
- Presence knob and 3-band EQ for shaping your tone
- Unique Tilt control blends bright and normal sounds
- Switchable 5W/10W/50W power enables high-output sounds at any volume
- Built-in FX loop makes integrating your pedalboard easy
- Footswitchable gain boost for adding extra punch to your solos
Available on backorder
A No-frills Gateway to Classic Marshall Tone
Packed with a generous complement of tubes, the Origin ORI50H exhibits vintage-inspired Marshall tone. This amp is powerful in its simplicity. Dial in the Gain and Master controls to get the right amount of crunch, then shape your tone with the Presence knob and the 3-band EQ. A unique Tilt control blends bright and normal sounds, while switchable power enables high-output sounds at any volume. A built-in FX loop makes integrating your pedalboard a breeze. There’s even a footswitchable gain boost for adding extra punch to your solos. The Origin ORI50H is a no-frills gateway to classic Marshall tone.
Marshall Origin Series | Official Demo
From the music store to stages everywhere
Jim Marshall didn’t start out building great amps. In fact, his entry into the amp world came about in part because the drummers that visited his music shop for equipment and lessons often brought along their guitar players. Conversations about their amplification needs led to the birth of a line of amps that would eventually change the sound of music. From those first humble creations to Pete Townshend’s first monster full stacks; from the mid-’60s combos to Hendrix to backlines of multiple Marshall rigs, there’s a reason why so many guitarists swear by Marshall amps. Try one out and see for yourself!
| Weight | 17.28 kg |
|---|---|
| Dimensions | 70.2 × 35.4 × 36.2 cm |
| Type: | Tube |
| Number of Channels: | Single |
| Output Power: | 50W (10W/5W power settings) |
| Preamp Tubes: | 3 x ECC83 |
| Power Tubes: | 2 x EL34 |
| EQ: | 3-band EQ, Tilt control |
| Inputs: | 1 x 1/4″ |
| Outputs: | 1 x 1/4″ (16 ohm), 2 x 1/4″ (2 x 16 ohm / single 8 ohm), 1 x 1/4″ (DI out) |
| Effects Loop: | Yes |
| Footswitch I/O: | 1 x 1/4″ (gain boost, effects loop) |
| Footswitch Included: | Yes, 2-button footswitch |
| Bias Type: | Adjustable Fixed |
| Construction Material: | Black Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall 2555X – Silver Jubilee 100W/50W Valve Head
- A reissue of the 1987 Silver Jubilee series guitar amplifier
- A favorite guitar amplifier of rock guitarists including Slash
- 2-channel, 100-watt all-tube amplifier includes high-/low-output switching
- Decked out in dazzling silver vinyl and outfitted with vintage appointments
- Straight or angled matching 4 x 12" cabinet with Celestion Vintage 30 speakers available
- Includes footswitch
Marshall JVM205H – 50 Watt All Valve 2 Channel Head
- 50-watt all-tube amp head
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has three footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Related products
Marshall 1922 – 150W 2×12″ Mono / 75W + 75W Stereo Cabinet
Marshall 1936 – 150W 2×12″ Mono / 75W + 75W Stereo Cabinet
Marshall 1960B – 300W 4×12″ Switchable Mono / Stereo Base Cabinet
Marshall 1960BX – 4×12″ 100W Classic Base Cabinet
Marshall 2203-01 – 100W Valve Head – JCM800
- Possibly the most iconic and most-played guitar amplifier since the late '70s
- 1-channel operation with 3-band EQ, a simple design that makes it easy to dial in great tones
- Incredibly powerful at 100W, not an amp that's made to be played quietly
- Series FX loop lets you switch pedals in and out, with true bypass operation for sonic transparency
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JTM45 2245 – 30W Valve Head
- Accurate reissue of the legendary JTM45 amplifier, a '60s rock legend
- 30 watts of power, perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Sounds great with gain boost pedal in front of it
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall JVM205C – 50 Watt All Valve 2×12″ 2 Channel Combo
Marshall JVM210H – 100 Watt All Valve 2 Channel Head
- 100 watts
- All-tube design includes 5 x 12AX7s and 4 x EL34s
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
