Marshall ORI20C – 20W All Valve Amp Combo
2,455.00 Excl. VAT
- Packed with 3 ECC83 preamp tubes and 2 EL34 power tubes
- 10″ Celestion V-type speaker provides classic British tone
- Separate Gain and Master controls for dialing in the right amount of crunch
- Presence knob and 3-band EQ for shaping your tone
- Unique Tilt control blends bright and normal sounds
- Switchable Low/Mid/High power enables high-output sounds at any volume
Available on backorder
Description
HIGH, MID AND LOW POWER WITH POWERSTEM, POWER REDUCTION TECHNOLOGY
Powerstem, our innovative power reduction technology, enables you to choose between high or low power modes without any compromise in sound quality.
Unlike traditional pentode/triode reduction methods, Powerstem works by reducing the voltage rails around the power amplifier. This unique approach facilitates power reduction without altering the sonic character, ensuring optimal tone and performance irrespective of the guitarist’s desired volume level.
Tilt control to blend your sound
Use the tilt control to adjust your sound and blend seamlessly from a standard tone to a high treble setting. This feature is derived from the multi-input technology found in our classic amplifiers like the 1959SLP and JTM45, condensed into a single, easily controlled knob.
2-way footswitch allows you to control the gain boost
The gain boost feature (controlled via a footswitch) offers a versatile tool to enhance your sound. Enabling this boost adds an extra layer of gain and delivers a distinctive crunch to your tone. This capability infuses your playing with increased intensity and character, allowing you to push your sonic expression even further.
Celestion VT-Junior speaker
Like its larger V-Type counterpart, the VT-Junior speaker provides a harmonious and well-balanced sound. Its compact 10-inch size delivers a powerful low mid punch, a sparkling high end, as well as extreme responsiveness that allows you to stay engaged with your music.
Additional information
| Weight | 18.68 kg |
|---|---|
| Dimensions | 61.6 × 34.2 × 57.8 cm |
| Type: | Tube |
| Number of Channels: | 1 |
| Output Power: | 20W (3W/0.5W power settings) |
| Speaker Size: | 1 x 10″ Celestion V Type |
| Preamp Tubes: | 3 x ECC83 |
| Power Tubes: | 2 x EL34 |
| EQ: | 3-band EQ, Tilt control |
| Inputs: | 1 x 1/4″ |
| Outputs: | 1 x 1/4″ (16 ohm), 2 x 1/4″ (2 x 16 ohm / single 8 ohm), 1 x 1/4″ (DI out) |
| Effects Loop: | Yes |
| Footswitch I/O: | 1 x 1/4″ (gain boost, effects loop) |
| Footswitch Included: | Yes, 2-button footswitch |
| Bias Type: | Cathode Biased |
| Construction Material: | Black Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall SC20C – 20W Valve amp combo
- Packs the incendiary tone of a JCM800 2203 into a 20-watt combo
- 10" Celestion V-Type speaker serves up classic British tone
- Conjures up everything from rich and full cleans to high-gain mayhem
- Separate Preamp Volume and Master Volume controls allow for high-gain tones at low volumes
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5 watts
- DI output for easy recording or routing to a PA
Marshall SN20H – 20W Valve Amp Combo
- 2-ch, 20W tube amplifier head inspired by the JCM900 — a high-octane hybrid amp that fueled countless rock and metal acts in the 1990s
- 2 x 5881 power tubes, 2 ECC83 preamp tubes, and an ECC83 phase splitter pair with clipping diodes to merge all the warmth of tube saturation with the clarity and reliability of solid-state technology
- Treble, Middle, Bass, and Presence knobs to dial in your sound to perfection
- Speaker-emulated DI output for easy recording and straight-to-PA gigging
- FX loop makes it a breeze to integrate your favorite time-based and modulation pedals
- Spring reverb circuit rounds out your sound with depth, space, and character
- 5W/1W power scaling for cranked tube tones at home- and recording-appropriate volume levels
- Classic aesthetics that are sure to thrill fans of the original JCM900
Marshall ST20C – 20W Combo
- 2-channel, 20-watt tube combo amplifier inspired by Marshall’s early 2245 model
- Dual 5881 power tubes, 2 ECC83 preamp tubes, and an ECC83 phase splitter capture the creamy highs, loose lows, and exceptionally dynamic overdrive of the original JTM
- Celestion G12M-65 Creamback speaker offers a slightly higher power rating and enhanced bass response over the original Creamback found in early Marshall amps
- High Treble and Normal channels can be patched together for endless tonal experimentation
- Treble, Middle, Bass, and Presence knobs to dial in your sound to perfection
- Speaker-emulated DI output for easy recording and straight-to-PA gigging
- FX loop makes it a breeze to integrate your favorite time-based and modulation pedals
- JTM-inspired aesthetics, including levant front covering, metal “coffin” logo, gold piping, and fawn fret
- Premium finger-jointed plywood enclosure
Related products
Marshall 1960AX – 4×12″ 100W Classic Angled Cabinet
- 4 x 12" vintage style speaker cabinet
- 25-watt Celestion G12-25 Greenback speakers
- 1970s checkered grille cloth and gold piping
- Small size white logo
- Black levant vinyl/white beading on cabinet
- Finger-locked joints are used on all 4 corners of the frame
- Castors are standard and can be removed if desired
- 100-watt power capacity
Marshall 1960BV – 280W 4×12″ Switchable Mono / Stereo Base Cabinet
- 280W, closed-back, 4 x 12-inch speaker cabinet
- Packs '80s-era sonic characteristics into a '60s-style enclosure
- Marshall G12 Vintage by Celestion speakers yield loads of low-end thump and high-end sizzle
- 16/4Ω mono, 8Ω stereo operation
- Straight design producers a thicker sound than an angled cabinet
- Features robust birch construction
- Includes casters for easier transport
Marshall 1960TV – 4×12″ 100W Original Tall Vintage Cabinet
- Extra-tall cabinet
- 25-watt Celestion Greenback speakers
- Grey EC grille cloth and gold piping
- Small size white logo with gold foil
- Black levant vinyl/gold beading on cabinet
- Finger-locked joints on all 4 corners of the cabinet's frame to ensure a tight fit between sides, make the cabinet less susceptible to damage, and allow the entire cabinet to resonate sympathetically with the sound from the speakers
- Castors are standard and can be removed if desired
- 100 watts at 16 ohms
Marshall 1974CX – 1×12″ Extension Cabinet for 1974X
- 20W, open-back, 1 x 12-inch speaker cabinet
- Exquisitely handwired with old-school construction methods
- Built with reproduced components for maximum authenticity
- Celestion G12M-20 Greenback speaker has been "aged" for true-to-life vintage tone
- 15Ω mono operation
- Robust birch construction with finger-locked joints
- Boasts an eye-grabbing, Bluesbreaker-inspired look
Marshall CODE25 – 25W MST Guitar Combo
- 25 watts with a 10" speaker - good for small gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for tight a 1 x 12" to a beefy 4 x 12"
- 24 digital FX to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall DSL1HR – 1W Valve Head with Reverb
- 2-ch amp head capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series FX loop accepts your favorite stompboxes with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- Record-ready line output utilizes Softube's accurate sound emulation of a Marshall 1960 cab
Marshall PEDL-90011 – 1 Way Latching Pedal – Channel change
- Simple, no-frills pedal with a single latching switch for channel selection.
- A bright, built-in LED indicates which channel is active
- Designed to work exclusively with the Marshall DSL1H and DSL1C from the 2018 DSL1 series.
- Built with a "road-ready metal" casing
- Pedal does not require a battery or an external power source.
- Draws power for the LED directly from the amplifier via the attached cable.
- It features a fixed, hard-wired cable with a 1/4-inch jack