Marshall 2525H – Silver Jubilee 25/5W Valve Head
3,665.00 Excl. VAT
- Full-featured version of Marshall’s popular Silver Jubilee amp head in a lighter, smaller package
- Same tone as the iconic ’87 Jubilee at your fingertips
- Variable wattage selection from 20W to 5W instantly adapts from full-powered performances to quieter studio and practice sessions
- DI output sends a record-ready signal straight to your mixing console
- FX loop accepts a wide variety of pedals for further tonal expansion
Available on backorder
Description
Power reduction from 20W to 5W at the flick of a switch
Find the right power for the right environment without compromising on tone. A simple flip of a switch allows you to opt for a power output of either 5W or 20W. Ideal for effortlessly moving between the bedroom and the studio.
Inspired by the original Silver Jubilee
Experience the versatile tones of the Silver Jubilee, in a smaller package. Originally released in 1987 to mark 25 years of Marshall. The Silver Jubilee became a quick favourite with guitar legends, such as Slash and John Frusciante, for its ferocious tone and split-channel design. You can now take the celebration with you, wherever you choose to play.
All-valve
This instantly recognisable tone is driven by two ECC83s in the preamp along with an ECC83 phase splitter and two EL34s in the power amp.
Additional information
| Weight | 13.36 kg |
|---|---|
| Dimensions | 66.6 × 28 × 29 cm |
| Type: | Tube |
| Number of Channels: | 2 |
| Output Power: | 20W/5W |
| Preamp Tubes: | 3 x ECC83 |
| Power Tubes: | 2 x EL34 |
| EQ: | 3-band EQ |
| Inputs: | 1 x 1/4″ |
| Outputs: | 2 x 1/4″ (8/16 ohm), 2 x 1/4″ (4/8 ohm), 1 x 1/4″ (16 ohm), 1 x 1/4″ (direct out) |
| Effects Loop: | Yes |
| Footswitch I/O: | 1 x 1/4″ |
| Footswitch Included: | Yes, 1-button footswitch |
| Bias Type: | Cathode Biased |
| Construction Material: | Silver Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall JVM210H – 100 Watt All Valve 2 Channel Head
- 100 watts
- All-tube design includes 5 x 12AX7s and 4 x EL34s
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Marshall SV20H – 20W Valve amp head – JMP 1959 SLP
- Packs the legendary tone of a 1959 Super Lead into a 20W head
- Conjures up saturated blues grit and biting leads — the coveted Plexi sound
- 4 separate inputs for you to blend your sound, along with high- and low-sensitivity loudness knobs
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5W
- DI output for easy recording or routing to a PA
Related products
Marshall 1960BHW – Handwired 1960B Cabinet
- A brilliantly retro 4 x 12-in. guitar cabinet handwired in Marshall's UK factory
- The perfect companion for your Marshall 1959HW Super Lead amp head
- Built to vintage specs with a period-correct black Tolex with an eye-catching salt 'n' pepper grille
- Celestion G12H-30 speakers yield aggressive lows, muscular low mids, incendiary upper mids, and ice-cool top end
- Tackles thunderous power chords and liquid lead lines with equal aplomb
- Easily cuts through a mix, even in the midst of extra-loud stage volumes
- Reinforced side handles and casters provide easy transport
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JTM45 2245 – 30W Valve Head
- Accurate reissue of the legendary JTM45 amplifier, a '60s rock legend
- 30 watts of power, perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Sounds great with gain boost pedal in front of it
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall PEDL-90011 – 1 Way Latching Pedal – Channel change
- Simple, no-frills pedal with a single latching switch for channel selection.
- A bright, built-in LED indicates which channel is active
- Designed to work exclusively with the Marshall DSL1H and DSL1C from the 2018 DSL1 series.
- Built with a "road-ready metal" casing
- Pedal does not require a battery or an external power source.
- Draws power for the LED directly from the amplifier via the attached cable.
- It features a fixed, hard-wired cable with a 1/4-inch jack