Marshall ST212 – 2×12 Upright Cabinet
2,930.00 Excl. VAT
- Inspired by the early days of Marshall amplification
- Dual Celestion G12M-65 Creamback speakers deliver the raw and organic tone that fueled the mid-1960s blues-rock revolution
- Closed-back design supplies a deep, punchy bass response
- A perfect pairing for the Marshall ST20H Studio JTM amplifier head
- Premium finger-jointed plywood enclosure, with handsome levant covering, gold piping and beading, and the old-school Marshall “coffin” logo
Available on backorder
Looks and Tone Inspired by Marshall’s Early Days
The Marshall ST212 is a compact, vertical 2×12″ extension cabinet designed to deliver the classic, vintage Marshall JTM tone in a smaller format suitable for home, studio, or stage use.
The Marshall ST212 Studio JTM cabinet is hand-built and features period-correct aesthetics, including a cream/white covering and the traditional Marshall “coffin” logo. It’s a closed-back design, which provides a tight, punchy low-end response.
Tone
The dual Celestion G12M-65 Creamback speakers are specifically chosen to recreate the warm, midrange-focused tones of the 1960s blues-rock era, handling both shimmering cleans and aggressive overdrive effectively.
Portability
The compact, vertical design makes it easier to transport than a traditional 4x12" cabinet while still offering the fullness of a 2x12" setup.
Compatibility
While designed as the perfect partner for the Marshall ST20H Studio JTM amplifier head, its standard 8-ohm impedance ensures compatibility with a wide range of other amp heads.
Aesthetics
The cabinet's vintage styling, including the fawn fret and "coffin" logo, is consistently highlighted as a major positive, perfectly matching the retro look of the Studio JTM series amps.
Potential Drawbacks
Some users note that even at lower power settings, the volume can be substantial for very small home use scenarios, and the lack of onboard features (like reverb on the matching head) may require using the effects loop with pedals.
| Weight | 27.42 kg |
|---|---|
| Dimensions | 61.2 × 37 × 80.8 cm |
| Configuration: | 2 x 12″ |
| Powered: | No |
| Speakers: | Celestion G12M-65 Creamback |
| Power Handling: | 130W |
| Impedance: | 8 ohms |
| Mono/Stereo: | Mono |
| Cabinet Type: | Slant |
| Open/Closed Back: | Closed |
| Inputs: | 1 x 1/4″ |
You may also like…
Marshall 1936V – 140W 2×12″ Mono / 70W + 70W Stereo Cabinet
- 2 x 12" speaker cab that delivers massive Marshall tone and epic volume
- 2 x Celestion G12 Vintage speakers provide punchy lows, smooth mids, and creamy highs
- Finger-jointed plywood gives you excellent durability and projection
- Configurable either in mono or split stereo configurations for added versatility
- Decked out with a black grille cloth, white piping, and black elephant grain vinyl
Marshall SV212 – 2×12 Speaker cabinet
- 2 x 12-in. closed-back extension cabinet
- Celestion G12 V-Type speakers have a balanced tonal signature that imparts a vintage musicality
- Clean sounds are true across the lows, mids, and highs, with just enough upper-mid chime and high-frequency sparkle to add clarity and definition
- Crank it up for sizzling overdrive and raw rock tones with plenty of midband warmth
- Slanted design ensures top-notch projection
- Matches the aesthetics of your Studio Vintage amplifier
Related products
Marshall 1974CX – 1×12″ Extension Cabinet for 1974X
- 20W, open-back, 1 x 12-inch speaker cabinet
- Exquisitely handwired with old-school construction methods
- Built with reproduced components for maximum authenticity
- Celestion G12M-20 Greenback speaker has been "aged" for true-to-life vintage tone
- 15Ω mono operation
- Robust birch construction with finger-locked joints
- Boasts an eye-grabbing, Bluesbreaker-inspired look
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall 2203-01 – 100W Valve Head – JCM800
- Possibly the most iconic and most-played guitar amplifier since the late '70s
- 1-channel operation with 3-band EQ, a simple design that makes it easy to dial in great tones
- Incredibly powerful at 100W, not an amp that's made to be played quietly
- Series FX loop lets you switch pedals in and out, with true bypass operation for sonic transparency
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JVM205H – 50 Watt All Valve 2 Channel Head
- 50-watt all-tube amp head
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has three footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
