Marshall SC20H – 20W Valve amp head Studio Classic – JCM 800 2203
3,665.00 Excl. VAT
- Packs the incendiary tone of a JCM800 2203 into a 20-watt head
- Conjures up everything from rich and full cleans to high-gain mayhem
- Separate Preamp Volume and Master Volume controls allow for high-gain tones at low volumes
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5 watts
- DI output for easy recording or routing to a PA
Available on backorder
Description
POWER REDUCTION FROM 20W TO 5W AT THE FLICK OF A SWITCH
Tailor your power setting to your preference. Switch effortlessly between 20W and 5W power output, seamlessly moving between your rehearsal space and home environment with ease.
INSPIRED BY THE ORIGINAL JCM800
A portable replica of the classic JCM800, which was originally introduced in the 80s. It offered more gain, taking you from clean to barking overdrive and soaring solos. With a roar rivalling that of the king of the jungle, the original is played by some of the greatest rock musicians of all time, so you’re sure to get amazing tones out of its smaller brother.
ALL-VALVE
This instantly recognisable tone is driven by two ECC83 preamp valves, an ECC83 phase splitter and two EL34 valves in the power amp.
Additional information
| Weight | 11.88 kg |
|---|---|
| Dimensions | 66 × 28 × 29 cm |
| Type: | Tube |
| Number of Channels: | Single channel |
| Output Power: | 20W (5W setting) |
| Preamp Tubes: | 3 x 12AX7 |
| Power Tubes: | 2 x EL34 |
| EQ: | 3-band EQ |
| Inputs: | 2 x 1/4″ (high, low) |
| Outputs: | 1 x 1/4″ (16 ohm), 2 x 1/4″ (single 8 ohm or 2 x 16 ohm), 2 x /14″ (single 4 ohm or 2 x 8 ohm), 1 x 1/4″ (DI out) |
| Effects Loop: | Yes |
| Bias Type: | Cathode Biased |
| Construction Material: | Black Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 4100 – 100W Dual Reverb Valve Head – JCM900
- Reissue of the beloved JCM900 all-tube head
- Incredibly powerful at 100-watts — not an amp that's made to be played quietly
- All-tube design and tone featuring ECC83 and 5881 tubes
- Series FX loop lets you switch effects pedals in and out, with true bypass operation for sonic transparency
- Straightforward control set is all you need to craft a range amazing guitar tones
- 2 speaker outputs for connecting extension cabinets
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JTM45 2245 – 30W Valve Head
- Accurate reissue of the legendary JTM45 amplifier, a '60s rock legend
- 30 watts of power, perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Sounds great with gain boost pedal in front of it
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Related products
Marshall 1936V – 140W 2×12″ Mono / 70W + 70W Stereo Cabinet
- 2 x 12" speaker cab that delivers massive Marshall tone and epic volume
- 2 x Celestion G12 Vintage speakers provide punchy lows, smooth mids, and creamy highs
- Finger-jointed plywood gives you excellent durability and projection
- Configurable either in mono or split stereo configurations for added versatility
- Decked out with a black grille cloth, white piping, and black elephant grain vinyl
Marshall 1960TV – 4×12″ 100W Original Tall Vintage Cabinet
- Extra-tall cabinet
- 25-watt Celestion Greenback speakers
- Grey EC grille cloth and gold piping
- Small size white logo with gold foil
- Black levant vinyl/gold beading on cabinet
- Finger-locked joints on all 4 corners of the cabinet's frame to ensure a tight fit between sides, make the cabinet less susceptible to damage, and allow the entire cabinet to resonate sympathetically with the sound from the speakers
- Castors are standard and can be removed if desired
- 100 watts at 16 ohms
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall 1974CX – 1×12″ Extension Cabinet for 1974X
- 20W, open-back, 1 x 12-inch speaker cabinet
- Exquisitely handwired with old-school construction methods
- Built with reproduced components for maximum authenticity
- Celestion G12M-20 Greenback speaker has been "aged" for true-to-life vintage tone
- 15Ω mono operation
- Robust birch construction with finger-locked joints
- Boasts an eye-grabbing, Bluesbreaker-inspired look
Marshall DSL1HR – 1W Valve Head with Reverb
- 2-ch amp head capable of conjuring any classic Marshall sound — past or present
- Refined EQ section gives you incredible tonal flexibility
- Studio-grade digital reverb adds dimension and depth to your tone
- Rear-panel series FX loop accepts your favorite stompboxes with ease
- High and low power modes allow you to dial in the appropriate volume for any setting
- Record-ready line output utilizes Softube's accurate sound emulation of a Marshall 1960 cab
Marshall JVM210H – 100 Watt All Valve 2 Channel Head
- 100 watts
- All-tube design includes 5 x 12AX7s and 4 x EL34s
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- MIDI in and MIDI thru jacks on rear panel
- Celestion speakers in combos
Marshall JVM215C – 50 Watt All Valve 1×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speakers
Marshall SC20C – 20W Valve amp combo
- Packs the incendiary tone of a JCM800 2203 into a 20-watt combo
- 10" Celestion V-Type speaker serves up classic British tone
- Conjures up everything from rich and full cleans to high-gain mayhem
- Separate Preamp Volume and Master Volume controls allow for high-gain tones at low volumes
- 3-band EQ with Presence control supplies flexible sound shaping
- Effects loop makes integrating your effects pedals and processors easy
- Power reduction circuit takes wattage down to a bedroom-friendly 5 watts
- DI output for easy recording or routing to a PA