Marshall JVM410C – 100 Watt All Valve 2×12″ 4 Channel Combo
6,965.00 Excl. VAT
- 100-watt 2 x 12″ Combo
- Marshall G-12 Vintage and Celestion 12″ speakers
- 5 x ECC83 (12AX7s) and 4 x EL34s
- 4 independent channels
- 3 footswitchable modes
- Studio quality digital reverb
- 2 footswitchable master volumes
- 2 FX loops – series/parallel
- Emulated line-out
- 6-way footswitch with memory
- Channel switching via MIDI
Available on backorder
Description
Multiple channels, each with dedicated volume controls
Get thrust into the spotlight with the JVM410 Combo. Equipped with an individual master volumes for each channel, this amp empowers you to create dynamic and explosive solo performances.
Built-in reverb options
Step out of your comfort zone thanks to built-in reverb controls. It’s time to experiment with your sound and unleash breathtaking solos that will leave a lasting impression.
Silent recording mode
The JVM410 Combo comes with recording features and a standby function tailored for silent recording. Connect your amplifier to a recording device using the line out. Keep the standby switch off for smooth transitions between bedroom practice, studio recording and live performances. It’s up to you to decide when and where you want to capture that perfect take.
Additional information
| Weight | 38.02 kg |
|---|---|
| Dimensions | 83.2 × 31.6 × 56.2 cm |
| Type: | Tube |
| Number of Channels: | 4 |
| Output Power: | 100W |
| Speaker Size: | 2 x 12″ |
| Preamp Tubes: | 4 x 12AX7 (preamp), 1 x 12AX7 (phase invert) |
| Power Tubes: | 4 x EL34 |
| Reverb: | Yes |
| EQ: | 3-band |
| Inputs: | 1 x Instrument |
| Outputs: | 5 x Speaker, 1 x XLR (Emulated Line) |
| Effects Loop: | Yes |
| Footswitch I/O: | 1 x 1/4″, 1 x 5-pin DIN (clean, crunch, overdrive, master, reverb, FX loop) |
| Footswitch Included: | Yes, 6-button footswitch |
| Bias Type: | Adjustable Fixed |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1960AV – 280W 4×12″ Switchable Mono / Stereo Angled Cabinet
- 280W, closed-back, 4 x 12-inch speaker cabinet
- Packs '80s-era sonic characteristics into a '60s-style enclosure
- Marshall G12 Vintage by Celestion speakers yield loads of low-end thump and high-end sizzle
- 16/4Ω mono, 8Ω stereo operation
- Angled design produces a brighter sound than a straight cabinet
- Features robust birch construction
- Includes casters for easier transport
Related products
Marshall 1960BHW – Handwired 1960B Cabinet
- A brilliantly retro 4 x 12-in. guitar cabinet handwired in Marshall's UK factory
- The perfect companion for your Marshall 1959HW Super Lead amp head
- Built to vintage specs with a period-correct black Tolex with an eye-catching salt 'n' pepper grille
- Celestion G12H-30 speakers yield aggressive lows, muscular low mids, incendiary upper mids, and ice-cool top end
- Tackles thunderous power chords and liquid lead lines with equal aplomb
- Easily cuts through a mix, even in the midst of extra-loud stage volumes
- Reinforced side handles and casters provide easy transport
Marshall 1960TV – 4×12″ 100W Original Tall Vintage Cabinet
- Extra-tall cabinet
- 25-watt Celestion Greenback speakers
- Grey EC grille cloth and gold piping
- Small size white logo with gold foil
- Black levant vinyl/gold beading on cabinet
- Finger-locked joints on all 4 corners of the cabinet's frame to ensure a tight fit between sides, make the cabinet less susceptible to damage, and allow the entire cabinet to resonate sympathetically with the sound from the speakers
- Castors are standard and can be removed if desired
- 100 watts at 16 ohms
Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
- Accurate reissue of the legendary JTM45 amplifier, with two 12" Celestion G12M Greenback speakers
- 30 watts of power - perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall 1974CX – 1×12″ Extension Cabinet for 1974X
- 20W, open-back, 1 x 12-inch speaker cabinet
- Exquisitely handwired with old-school construction methods
- Built with reproduced components for maximum authenticity
- Celestion G12M-20 Greenback speaker has been "aged" for true-to-life vintage tone
- 15Ω mono operation
- Robust birch construction with finger-locked joints
- Boasts an eye-grabbing, Bluesbreaker-inspired look
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall 2203-01 – 100W Valve Head – JCM800
- Possibly the most iconic and most-played guitar amplifier since the late '70s
- 1-channel operation with 3-band EQ, a simple design that makes it easy to dial in great tones
- Incredibly powerful at 100W, not an amp that's made to be played quietly
- Series FX loop lets you switch pedals in and out, with true bypass operation for sonic transparency
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall JVM210C – 100 Watt All Valve 2×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speaker
Marshall JVM215C – 50 Watt All Valve 1×12″ 2 Channel Combo
- All-tube design including 5 x12AX7s, 2 x EL34s (50-watt), or 4 x EL34s (100-watt)
- 2 totally independent, footswitchable channels - clean/crunch and overdrive
- Each channel has 3 footswitchable modes - green, orange, and red
- Each mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)
- Footswitchable, studio-quality digital reverb
- Independent reverb controls for both channels
- 2 footswitchable master volumes
- 2 effects loops - 1 series, and 1 parallel/series
- Parallel/series effects loop is footswitchable on/off
- Speaker-emulated XLR line-out
- Programmable 4-way, 5-LED footswitch with memory capabilities
- All switching can be done via MIDI
- Marshall G-12 Vintage speakers