Marshall 1962-01 – 30W Valve 2×12″ Combo – Bluesbreaker
9,165.00 Excl. VAT
- Accurate reissue of the legendary JTM45 amplifier, with two 12″ Celestion G12M Greenback speakers
- 30 watts of power – perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Footswitchable tremolo sounds amazing
- Straightforward control set is all you need to craft a range of vintage ’60s guitar tones
Available on backorder
Description
TWO CHANNELS
The two channels of the 1962 combo amp allow for a broader range of tones and sounds. You can set up different settings on each channel and effortlessly switch between the two when needed. This versatility is particularly useful when playing various genres of music.
Celestion G12M-25 speakers
Despite the G12M Greenback speaker undergoing some changes over time, it has still managed to keep its highly sought-after sound. The 25W version of this speaker has a bold mid-range and tight high-end, giving it aggressive tones for chords and searing leads. It’s perfect for bringing drive and clarity to modern high gain amps.
Perfect simplicity
Nothing gets in the way of you and your music with the 1962 Combo amp. Thanks to its tremolo effect (which can be controlled via footswitch), two channel input and three band EQ, this amp is uncomplicated and undemanding. It’s for those who want to just plug in and perform.
Additional information
| Weight | 35.1 kg |
|---|---|
| Dimensions | 80.4 × 35.4 × 64.2 cm |
| Type: | Tube |
| Number of Channels: | 1 |
| Output Power: | 30W |
| Preamp Tubes: | 3 x 12AX7 (preamp), 1 x 12AX7 (phase invert) |
| Power Tubes: | 2 x 5881 (power), 1 x GZ34 (rectifier) |
| EQ: | 3-band EQ |
| Effects: | Tube-driven Tremolo |
| Inputs: | 2 x 1/4″ (high), 2 x 1/4″ (low) |
| Outputs: | 2 x 1/4″ (internal, 4/8/16 ohms) |
| Footswitch I/O: | 1 x 1/4″ (tremolo) |
| Footswitch Included: | Yes, 1-button footswitch |
| Bias Type: | Adjustable Fixed |
| Construction Material: | Black Tolex |
| Power Source: | Standard IEC AC cable |
You may also like…
Marshall 1959HW – Handwired 1959 Head
- An authentic tribute to the iconic amp that defined the Plexi sound and cemented Marshall’s status as a rock icon
- Roaring 100W power section driven by 4 EL34 power tubes
- Preamp section comprises 2 ECC83 tubes and an ECC83 phase splitter
- 2 non-footswitchable channels, with the ability to jumper both to blend between them
- Global 3-band EQ and Presence control to sculpt your tone
- Channel-specific high- and low-sensitivity inputs accommodate a vast variety of pickup configurations
- Multiple impedance selector accommodates cab setups of all kinds
- Traditional handwired construction, proudly made in Marshall’s English facility
- Iconic Plexi aesthetics are sure to draw the envy of any guitarist
Marshall 1974X Re-issue of 18W / 1×12 Handwired Combo
- Hand-soldered re-creation of a mid-'60s Marshall 1974 tube combo
- Delivers 18W of tube-fueled power via dual cathode-biased EL84s
- Preamp section is loaded with 3 ECC83 tubes; includes an EZ81 rectifier tube
- 2-channel, non-master-volume design with per-channel Tone and Volume controls
- Tube-driven, footswitchable tremolo with dedicated Speed and Intensity knobs
- Boasts near-perfect duplicates of the original amplifier's off-the-shelf transformers
- Celestion G12M-20 Greenback has been "aged" for true-to-life vintage tone
Related products
Marshall 1936V – 140W 2×12″ Mono / 70W + 70W Stereo Cabinet
- 2 x 12" speaker cab that delivers massive Marshall tone and epic volume
- 2 x Celestion G12 Vintage speakers provide punchy lows, smooth mids, and creamy highs
- Finger-jointed plywood gives you excellent durability and projection
- Configurable either in mono or split stereo configurations for added versatility
- Decked out with a black grille cloth, white piping, and black elephant grain vinyl
Marshall 1987X-01 – 50W Valve Head
- Faithful tone-stacking amp head reissue with 50W output
- 3 ECC83 preamp tubes and 2 EL34 power amp tubes articulate every nuance of your playing dynamics
- Classic 3-band EQ dials in tones ranging from arena-rock-ready chord work to low-grit blues
- Presence control further shapes your overall tone
- Series FX loop with true bypass switch easily adapts your FX to your sound
Marshall 2203-01 – 100W Valve Head – JCM800
- Possibly the most iconic and most-played guitar amplifier since the late '70s
- 1-channel operation with 3-band EQ, a simple design that makes it easy to dial in great tones
- Incredibly powerful at 100W, not an amp that's made to be played quietly
- Series FX loop lets you switch pedals in and out, with true bypass operation for sonic transparency
- Birch-ply construction is incredibly strong and ready for life on the road
Marshall CODE50 – 50W MST Guitar Combo
- 50 watts with a 12-inch speaker — good for club gigs and practices
- 14 preamp models include classics like the JCM800, Bluesbreaker Plexi, and Silver Jubilee
- 4 power amp models for vintage and modern British and American tones
- 8 different speaker emulations for a tight 1 x 12-inch to a beefy 4 x 12-inch
- 24 digital effects to inspire new amp tones
- Auxiliary input for jamming along with music
- Headphone output for silent practice and direct recording
Marshall JTM45 2245 – 30W Valve Head
- Accurate reissue of the legendary JTM45 amplifier, a '60s rock legend
- 30 watts of power, perfect for gigging and recording
- GZ34 tube rectifier adds natural, smooth compression and sustain to your tone
- Sounds great with gain boost pedal in front of it
- Straightforward control set is all you need to craft a range of vintage '60s guitar tones
Marshall PEDL-90011 – 1 Way Latching Pedal – Channel change
- Simple, no-frills pedal with a single latching switch for channel selection.
- A bright, built-in LED indicates which channel is active
- Designed to work exclusively with the Marshall DSL1H and DSL1C from the 2018 DSL1 series.
- Built with a "road-ready metal" casing
- Pedal does not require a battery or an external power source.
- Draws power for the LED directly from the amplifier via the attached cable.
- It features a fixed, hard-wired cable with a 1/4-inch jack