sE Electronics DM1 Dynamite 1-channel Active Inline Preamp – Black
435.00 Excl. VAT
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 28dB of Gain
- Adds +28dB of clean gain to low-output passive microphones for proper gain staging
- Class A electronics offer a neutral sound
- Output buffer ensures the unit provides consistent gain regardless of load
- Low output impedance ensures you get a clean signal regardless of cable length
- Gold-plated connectors offer a loss-free and reliable connection
- Rugged metal housing stands up to punishment
In stock
DM1 DYNAMITE
Explosive level for all your passive mics
An ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones.
Inside the DM1 DYNAMITE
[+]28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD
The DM1 provides +28dB of consistent gain regardless of the connected load, thanks to its dedicated buffer amplifier. Designed for neutral, balanced sound quality, the DM1 DYNAMITE is the perfect way to boost the signal of any dynamic or passive ribbon microphone.
SOPHISTICATED CLASS-A ELECTRONICS
With a sophisticated class-A transformerless design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market for pristine sound quality.
SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH
The DM1 is built to provide reliable, consistent operation for the most demanding on-stage applications in the most demanding environments. With a roadworthy, slim all-metal design and robust construction with high-quality manufacturing standards to handle drops, falls and even kicks.
DEDICATED OUTPUT BUFFER AMPLIFIER
Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide a significantly improved level to your preamp – all without adding noise or coloration. In addition, its output impedance is the lowest in its class, allowing the DM1 to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.
LOSS-FREE & RELIABLE SIGNAL CONNECTION
Gold-plated XLR connectors ensure loss-free and reliable signal connection for your favorite dynamic and passive ribbon microphones.
| Weight | 0.12 kg |
|---|---|
| Dimensions | 16.13 × 3.18 × 3.18 cm |
| Channels: |
1 |
| Features: |
15dB/30dB Gain Boost, 8 Impedance Load Settings |
| Outputs: |
1 x XLR |
| Power Source: |
48V Phantom Power |
| Type: |
1-channel Active Direct Box |
| Inputs |
1 x XLR |
Related products
sE Electronics DM1 Dynamite Active In-Line Microphone Preamplifier – Red
- Active In-line Preamp for Passive Dynamic and Ribbon Mics with 28dB of Gain
- Adds +28dB of clean gain to low-output passive microphones for proper gain staging
- Class A electronics offer a neutral sound
- Output buffer ensures the unit provides consistent gain regardless of load
- Low output impedance ensures you get a clean signal regardless of cable length
- Gold-plated connectors offer a loss-free and reliable connection
- Rugged metal housing stands up to punishment
sE Electronics guitaRF Reflexion Filter with Stand
- Portable Iso Booth Designed Specifically for Miking Guitar Cabinets
- A Reflexion Filter for your guitar cab to provide isolation on loud stages
- Used in venues to help control instrument bleed
- A friendly studio companion that provides additional isolation
- A dual mic mount ensures a safer on-stage experience
- Thanks to its dual mic mount, experience immediate phase alignment
- Minimal stage bleed and coloration allows the ideal filtration
sE Electronics RF PRO Reflexion Filter PRO
- Portable Acoustic Treatment to Reduce Room Ambience
- The original Reflexion Filter invented by sE
- Patented multi-layer technology
- Works evenly across the whole frequency spectrum
- Ensures a balanced, even sound with no coloration at all
- The choice of renowned recording artists worldwide
- Each Reflexion Filter is hand-made in our very own factory
sE Electronics RF PRO Reflexion Filter PRO – BLACK
- Portable Acoustic Treatment to Reduce Room Ambience
- The original Reflexion Filter invented by sE
- Patented multi-layer technology
- Works evenly across the whole frequency spectrum
- Ensures a balanced, even sound with no coloration at all
- The choice of renowned recording artists worldwide
- Each Reflexion Filter is hand-made in our very own factory
sE Electronics sE2200 Large-diaphragm Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone with 80/160Hz
- Hand-crafted 1” true condenser capsule individually tuned in our own factory
- The same condenser microphone loved by an entire generation of engineers
- Traditional Class-A electronic design with consistent low-noise performance
- Custom-built output transformer and massively shielded all-metal housing
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads
sE Electronics sE4100 Large-Diaphragm Condenser Microphone – Matched Pair
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- Twin 1" Gold-sputtered Brass Capsule
- 80Hz/160Hz Low-cut Filters, and -10dB-/20dB Pads
- The cardioid-only version of the renowned sE4400
- The very same hand-crafted twin 1“ gold-sputtered brass capsule as the sE4400
- True condenser cardioid capsule
- Individually tuned in our own factory
sE Electronics X1 A Large-diaphragm Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone
- with -20dB Pad and 100Hz Highpass Filter - Black
- Newly-developed condenser capsule with the same rugged metal chassis of the X1 SERIES
- First-class sound & specifications at an even better "home studio" cost
- Extremely natural frequency response, massive SPL-handling capabilities (150dB!)
- Switchable attenuation and low-cut filters, with a perfectly balanced sensitivity level
- 100 Hz bass-cut filter and -20 dB attenuation pad