sE Electronics Voodoo VR1 Passive Ribbon Microphone
1,895.00 Excl. VAT
-
Passive Ribbon Microphone
- Superbly detailed, open and natural sound
- A passive ribbon to bring out the bite and edge from your guitar cabs
- Hand-tensioned ribbon constructed by our highly specialized technicians
- Full frequency response using technology
- All-metal housing and gold plated XLR connector
- A secret weapon for top musicians and engineers worldwide
Available on backorder
Estimated delivery: March 27, 2026 – April 6, 2026
Description
VR1
The VR ribbon microphones from sE mark a new era for ribbon mic technology
A passive ribbon to bring out the bite and edge from your guitar cabs with no muddy highs.
Inside the VR1
A NEW ERA FOR RIBBON MIC TECHNOLOGY
Until the VR Series, the only ribbon mic in the world to perform across 20Hz-20kHz was our own Rupert Neve collaboration, the RNR1. This was achieved using state-of-the-art custom transformers and a Rupert Neve-designed circuit to reveal HF usually absent.
A PASSIVE RIBBON WITH FULL FREQUENCY RESPONSE
With the VR mics, full frequency response is achieved using a clever mechanical device designed by Siwei Zou, the company CEO, and a hand-tensioned ribbon constructed by our highly specialized technicians in sE’s capsule room.
ALL-METAL HOUSING & PREMIUM FINISH
Unlike the cheaply constructed bodies of some other affordable microphones, the VR1’s all-metal housing provides efficient rejection of any electrical interference and noise – and the high-quality finish ensures a great look for years to come.
GOLD-PLATED XLR CONNECTOR
Ensures loss-free, reliable signal connection for years and years of demanding use in the studio or on tour.
Additional information
| Weight | 1.00 kg |
|---|---|
| Dimensions | 35.31 × 12.70 × 9.65 cm |
| Color: | Black |
| Connector: | XLR |
| Frequency Range: | 20Hz-18kHz (±2dB) |
| Max SPL: | 135dB SPL |
| Output Impedance: | 300 ohms |
| Polar Pattern: | Figure-8 |
| Ribbon Type: | 2-micron Aluminum |
| Self Noise: | 17dB (A weighted) |
| Microphone Type | Ribbon |
Related products
sE Electronics BL8 Cardioid Boundary Microphone
- Cardiod Boundary Microphone with Condenser Capsule
- Condenser capsule supplies pristine sound pickup
- Character switch imparts classic or modern sound quality to your signal
- Switchable low-cut filter tames the low end when needed
- Attenuation switch gives you two input pads
- Low-profile design effortlessly fits into confined spaces
- Compatible with Kelly Shu microphone mounts
sE Electronics guitaRF Reflexion Filter with Stand
- Portable Iso Booth Designed Specifically for Miking Guitar Cabinets
- A Reflexion Filter for your guitar cab to provide isolation on loud stages
- Used in venues to help control instrument bleed
- A friendly studio companion that provides additional isolation
- A dual mic mount ensures a safer on-stage experience
- Thanks to its dual mic mount, experience immediate phase alignment
- Minimal stage bleed and coloration allows the ideal filtration
sE Electronics RF PRO Reflexion Filter PRO
- Portable Acoustic Treatment to Reduce Room Ambience
- The original Reflexion Filter invented by sE
- Patented multi-layer technology
- Works evenly across the whole frequency spectrum
- Ensures a balanced, even sound with no coloration at all
- The choice of renowned recording artists worldwide
- Each Reflexion Filter is hand-made in our very own factory
sE Electronics RF PRO Reflexion Filter PRO – BLACK
- Portable Acoustic Treatment to Reduce Room Ambience
- The original Reflexion Filter invented by sE
- Patented multi-layer technology
- Works evenly across the whole frequency spectrum
- Ensures a balanced, even sound with no coloration at all
- The choice of renowned recording artists worldwide
- Each Reflexion Filter is hand-made in our very own factory
sE Electronics sE4100 Large-Diaphragm Condenser Microphone
- Large-diaphragm Condenser Mic with Cardioid Polar Pattern
- Twin 1" Gold-sputtered Brass Capsule
- 80Hz/160Hz Low-cut Filters, and -10dB-/20dB Pads
- The cardioid-only version of the renowned sE4400
- The very same hand-crafted twin 1“ gold-sputtered brass capsule as the sE4400
- True condenser cardioid capsule
- Individually tuned in our own factory
sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone – Matched Pair
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
sE Electronics V7 MK Myles Kennedy Signature Edition Handheld Supercardioid Dynamic Microphone
- Handheld Supercardioid Dynamic Microphone - Myles Kennedy Edition
- Specialized aluminum voice coil offers superb sound reproduction
- Supercardioid capsule yields excellent isolation
- Integrated shockmount eliminates rumble and handling noise
- Internal windscreen
- Both red and black windscreens are included to suit your style
- Beveled edge keeps the mic from rolling around when you set it down
sE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone
- Large-diaphragm Cardioid Condenser Microphone
- with -10dB/-20dB Pad and Low-cut Filters
- Custom-designed hand-crafted true condenser capsule individually tuned
- A refined version of sE's best-selling X1
- Improved sensitivity, dramatically increased SPL handling (up to 160dB!)
- Hand-made metal housing and gold-sputtered diaphragms
- 80 /160 Hz bass-cut filters and -10 / -20 dB pads